/******************常數定義********************/
#define fosc 8000000
#define baud 19200
/*******************LCD定義********************/
#define CTLPORT PORTD   //模擬總線用了PD口的PD5,PD6,PD7
#define LCD_RS  5       // pin-0 on CTLPORT
#define LCD_RW  6       // pin-1 on CTLPORT
#define LCD_E   7       // pin-2 on CTLPORT
#define SET_LCD_E       CTLPORT|=(1<<LCD_E)        // LCD: E = 1
#define CLR_LCD_E       CTLPORT&=~(1<<LCD_E)       // LCD: E = 0
#define SET_LCD_RW      CTLPORT|=(1<<LCD_RW)       // LCD: R/W = 1 (read)
#define CLR_LCD_RW      CTLPORT&=~(1<<LCD_RW)      // LCD: R/W = 0 (write)
#define SET_LCD_RS      CTLPORT|=(1<<LCD_RS)       // LCD: R/S = 1 (data reg)
#define CLR_LCD_RS      CTLPORT&=~(1<<LCD_RS)      // LCD: R/S = 0 (status reg)
unsigned char const table_1[] = {"    WELCOME!"};
unsigned char const table_2[] = {"FDLKFLDLF"};
unsigned char const readcal1[]={0xAA,0xBB,0x0A,0x21,0x00,0x01,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x2A};//讀塊1
unsigned char const writecal1[]={0xAA,0xBB,0x1A,0x22,0x00,0x01,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,};
unsigned char const writecal2[]={"Pidan  22913601 "};
unsigned char writecaltemp[16];
unsigned char checktemp;	//校驗
//****************************************************顯示暫存//
unsigned char const Name[6]={"NAME:"};
unsigned char const Num[5]={"NUM:"};
unsigned char NumBuf[9];	   //卡號暫存
unsigned char NameBuf[7];		   //姓名暫存
//****************************************************中斷任務//
//接收串口數據//
unsigned char RxUartDbuf[250];
unsigned char RxUartAddr;
unsigned char RxUartTemp;
unsigned int RxUartLeng;
unsigned int RxUartWait;
unsigned int RxUartDely;

//輸出三色燈//
unsigned char OutLedAddr;
unsigned int OutLedDely;
//輸出提示聲//
unsigned char OutToneAddr;
unsigned char OutToneCount;
unsigned char OutToneCount1;
unsigned int OutToneDely;
//****************************************************分時任務//
//接收遠程//
unsigned char RxGsmAddr;
//接收卡信息//
unsigned char RxCalAddr;
unsigned char RxCalDely;