?? project74.m
字號:
%
% project 74 % cost 205 model for BAD URBAN case
%
% =======================================================================
clear
close all
clc
% =======================================================================
Nsamples=1000; % number of samples to be generated
fMHz=900; % Freq. in MHz
V=10; % mobile speed in m/s
F=8; % Sampling: Fraction of wavelength
NFFT= 128; % No. of FFT points
freqstep=1; % freq step in defining Doppler filters
% ========================================================================
lambdac=300/fMHz; % wavelength
kc=2*pi/lambdac; % wave number
fm=V/lambdac; % Max Doppler
ts=(lambdac/F)/V; % sampling spacing (s)
fs=1/ts; % sampling freq. (Hz)
timeaxis=[0:Nsamples-1]*ts; % time axis
% =======================================================================
% BU Bad Urban
% Tap # Del(us) Pwr(dB) Doppler
% 1 0 -7 CLASS
% 2 0.2 -3 CLASS
% 3 0.4 -1 CLASS
% 4 0.8 0 GAUS1
% 5 1.6 -2 GAUS1
% 6 2.2 -6 GAUS2
% 7 3.2 -7 GAUS2
% 8 5.0 -1 GAUS2
% 9 6.0 -2 GAUS2
% 10 7.2 -7 GAUS2
% 11 8.2 -10 GAUS2
% 12 10.0 -15 GAUS2
TapPWR=[-7; -3; -1; 0; -2; -6; -7; -1; -2; -7; -10; -15];
TapNo=[1; 2; 3; 4; 5; 6; 7; 8; 9; 10; 11; 12];
TAU=[0; 0.2; 0.4; 0.8; 1.6; 2.2; 3.2; 5.0; 6.0; 7.2; 8.2; 10.0];
TDL=[];
DOP=[];
figure,stem2D(TAU,TapPWR,-40)
auxy=axis;
axis([auxy(1)-1 auxy(2)+1 auxy(3) auxy(4)+10])
xlabel('Excess delay (us)')
ylabel('Relative level (dB)')
title('COST 207 Bad Urban TDL model')
% =======================================================================
% Tap # Del(us) Pwr(dB) Doppler
% 1 0 -7 CLASS
% =======================================================================
I=randn(1,Nsamples); % In-phase component
Q=randn(1,Nsamples); % Quadrature component
[filtertimedomain]=jakes(freqstep,fm,fs);
ray=sqrt(0.5)*(I+j*Q);
ray=ray*10^(0.1*TapPWR(1));
ray_filt=conv(ray,filtertimedomain);
len=length(filtertimedomain); % remove extra samples after convolution
ray_filt=ray_filt(len:length(ray_filt)-len-1);
timeaxis=[0:Nsamples-len-2]*ts; % time axis
TDL=[TDL ray_filt'];
DOP=[DOP fftshift(abs(fft(ray_filt,NFFT)').^2)];
% =======================================================================
% Tap # Del(us) Pwr(dB) Doppler
% 2 0.2 -3 CLASS
% =======================================================================
I=randn(1,Nsamples); % In-phase component
Q=randn(1,Nsamples); % Quadrature component
[filtertimedomain]=jakes(freqstep,fm,fs);
ray=sqrt(0.5)*(I+j*Q);
ray=ray*10^(0.1*TapPWR(2));
ray_filt=conv(ray,filtertimedomain);
len=length(filtertimedomain); % remove extra samples after convolution
ray_filt=ray_filt(len:length(ray_filt)-len-1);
TDL=[TDL ray_filt'];
DOP=[DOP fftshift(abs(fft(ray_filt,NFFT)').^2)];
% =======================================================================
% Tap # Del(us) Pwr(dB) Doppler
% 3 0.4 -1 CLASS
% =======================================================================
I=randn(1,Nsamples); % In-phase component
Q=randn(1,Nsamples); % Quadrature component
[filtertimedomain]=jakes(freqstep,fm,fs);
ray=sqrt(0.5)*(I+j*Q);
ray=ray*10^(0.1*TapPWR(3));
ray_filt=conv(ray,filtertimedomain);
len=length(filtertimedomain); % remove extra samples after convolution
ray_filt=ray_filt(len:length(ray_filt)-len-1);
TDL=[TDL ray_filt'];
DOP=[DOP fftshift(abs(fft(ray_filt,NFFT)').^2)];
% ========================================================================
% Tap # Del(us) Pwr(dB) Doppler
% 4 0.8 0 GAUS1
% ========================================================================
I=randn(1,Nsamples); % In-phase component
Q=randn(1,Nsamples); % Quadrature component
fr11=-0.8*fm;
fr12=0.05*fm;
fr21=0.4*fm;
fr22=0.1*fm;
A=-10; % attenuation of second component wrt first
[filtertimedomain]=gaussCOST207(freqstep,fm,fs,fr11,fr12,fr21,fr22,A);
ray=sqrt(0.5)*(I+j*Q);
ray=ray*10^(0.1*TapPWR(4));
ray_filt=conv(ray,filtertimedomain);
len=length(filtertimedomain); % remove extra samples after convolution
ray_filt=ray_filt(len:length(ray_filt)-len-1);
TDL=[TDL ray_filt'];
DOP=[DOP fftshift(abs(fft(ray_filt,NFFT)').^2)];
% ========================================================================
% Tap # Del(us) Pwr(dB) Doppler
% 5 1.6 -2 GAUS1
% ========================================================================
I=randn(1,Nsamples); % In-phase component
Q=randn(1,Nsamples); % Quadrature component
fr11=-0.8*fm;
fr12=0.05*fm;
fr21=0.4*fm;
fr22=0.1*fm;
A=-10; % attenuation of second component wrt first
[filtertimedomain]=gaussCOST207(freqstep,fm,fs,fr11,fr12,fr21,fr22,A);
close, close, close
ray=sqrt(0.5)*(I+j*Q);
ray=ray*10^(0.1*TapPWR(5));
ray_filt=conv(ray,filtertimedomain);
len=length(filtertimedomain); % remove extra samples after convolution
ray_filt=ray_filt(len:length(ray_filt)-len-1);
TDL=[TDL ray_filt'];
DOP=[DOP fftshift(abs(fft(ray_filt,NFFT)').^2)];
% ========================================================================
% Tap # Del(us) Pwr(dB) Doppler
% 6 2.2 -6 GAUS2
% ========================================================================
I=randn(1,Nsamples); % In-phase component
Q=randn(1,Nsamples); % Quadrature component
fr1=0.7*fm;
fr2=0.1*fm;
fr1=-0.4*fm;
fr2=0.15*fm;
A=-15; % attenuation of second component wrt first
[filtertimedomain]=gaussCOST207(freqstep,fm,fs,fr11,fr12,fr21,fr22,A);
ray=sqrt(0.5)*(I+j*Q);
ray=ray*10^(0.1*TapPWR(6));
ray_filt=conv(ray,filtertimedomain);
len=length(filtertimedomain); % remove extra samples after convolution
ray_filt=ray_filt(len:length(ray_filt)-len-1);
TDL=[TDL ray_filt'];
DOP=[DOP fftshift(abs(fft(ray_filt,NFFT)').^2)];
% ========================================================================
% Tap # Del(us) Pwr(dB) Doppler
% 7 3.2 -7 GAUS2
% ========================================================================
I=randn(1,Nsamples); % In-phase component
Q=randn(1,Nsamples); % Quadrature component
fr1=0.7*fm;
fr2=0.1*fm;
fr1=-0.4*fm;
fr2=0.15*fm;
A=-15; % attenuation of second component wrt first
[filtertimedomain]=gaussCOST207(freqstep,fm,fs,fr11,fr12,fr21,fr22,A);
close, close, close
ray=sqrt(0.5)*(I+j*Q);
ray=ray*10^(0.1*TapPWR(7));
ray_filt=conv(ray,filtertimedomain);
len=length(filtertimedomain); % remove extra samples after convolution
ray_filt=ray_filt(len:length(ray_filt)-len-1);
TDL=[TDL ray_filt'];
DOP=[DOP fftshift(abs(fft(ray_filt,NFFT)').^2)];
% ========================================================================
% Tap # Del(us) Pwr(dB) Doppler
% 8 5.0 -1 GAUS2
% ========================================================================
I=randn(1,Nsamples); % In-phase component
Q=randn(1,Nsamples); % Quadrature component
fr1=0.7*fm;
fr2=0.1*fm;
fr1=-0.4*fm;
fr2=0.15*fm;
A=-15; % attenuation of second component wrt first
[filtertimedomain]=gaussCOST207(freqstep,fm,fs,fr11,fr12,fr21,fr22,A);
close, close, close
ray=sqrt(0.5)*(I+j*Q);
ray=ray*10^(0.1*TapPWR(8));
ray_filt=conv(ray,filtertimedomain);
len=length(filtertimedomain); % remove extra samples after convolution
ray_filt=ray_filt(len:length(ray_filt)-len-1);
TDL=[TDL ray_filt'];
DOP=[DOP fftshift(abs(fft(ray_filt,NFFT)').^2)];
% ========================================================================
% Tap # Del(us) Pwr(dB) Doppler
% 9 6.0 -2 GAUS2
% ========================================================================
I=randn(1,Nsamples); % In-phase component
Q=randn(1,Nsamples); % Quadrature component
fr1=0.7*fm;
fr2=0.1*fm;
fr1=-0.4*fm;
fr2=0.15*fm;
A=-15; % attenuation of second component wrt first
[filtertimedomain]=gaussCOST207(freqstep,fm,fs,fr11,fr12,fr21,fr22,A);
close, close, close
ray=sqrt(0.5)*(I+j*Q);
ray=ray*10^(0.1*TapPWR(9));
ray_filt=conv(ray,filtertimedomain);
len=length(filtertimedomain); % remove extra samples after convolution
ray_filt=ray_filt(len:length(ray_filt)-len-1);
TDL=[TDL ray_filt'];
DOP=[DOP fftshift(abs(fft(ray_filt,NFFT)').^2)];
% ========================================================================
% Tap # Del(us) Pwr(dB) Doppler
% 10 7.2 -7 GAUS2
% ========================================================================
I=randn(1,Nsamples); % In-phase component
Q=randn(1,Nsamples); % Quadrature component
fr1=0.7*fm;
fr2=0.1*fm;
fr1=-0.4*fm;
fr2=0.15*fm;
A=-15; % attenuation of second component wrt first
[filtertimedomain]=gaussCOST207(freqstep,fm,fs,fr11,fr12,fr21,fr22,A);
close, close, close
ray=sqrt(0.5)*(I+j*Q);
ray=ray*10^(0.1*TapPWR(10));
ray_filt=conv(ray,filtertimedomain);
len=length(filtertimedomain); % remove extra samples after convolution
ray_filt=ray_filt(len:length(ray_filt)-len-1);
TDL=[TDL ray_filt'];
DOP=[DOP fftshift(abs(fft(ray_filt,NFFT)').^2)];
% ========================================================================
% Tap # Del(us) Pwr(dB) Doppler
% 11 8.2 -10 GAUS2
% ========================================================================
I=randn(1,Nsamples); % In-phase component
Q=randn(1,Nsamples); % Quadrature component
fr1=0.7*fm;
fr2=0.1*fm;
fr1=-0.4*fm;
fr2=0.15*fm;
A=-15; % attenuation of second component wrt first
[filtertimedomain]=gaussCOST207(freqstep,fm,fs,fr11,fr12,fr21,fr22,A);
close, close, close
ray=sqrt(0.5)*(I+j*Q);
ray=ray*10^(0.1*TapPWR(11));
ray_filt=conv(ray,filtertimedomain);
len=length(filtertimedomain); % remove extra samples after convolution
ray_filt=ray_filt(len:length(ray_filt)-len-1);
TDL=[TDL ray_filt'];
DOP=[DOP fftshift(abs(fft(ray_filt,NFFT)').^2)];
% ========================================================================
% Tap # Del(us) Pwr(dB) Doppler
% 12 10.0 -15 GAUS2
% ========================================================================
I=randn(1,Nsamples); % In-phase component
Q=randn(1,Nsamples); % Quadrature component
fr1=0.7*fm;
fr2=0.1*fm;
fr1=-0.4*fm;
fr2=0.15*fm;
A=-15; % attenuation of second component wrt first
[filtertimedomain]=gaussCOST207(freqstep,fm,fs,fr11,fr12,fr21,fr22,A);
close, close, close
ray=sqrt(0.5)*(I+j*Q);
ray=ray*10^(0.1*TapPWR(12));
ray_filt=conv(ray,filtertimedomain);
len=length(filtertimedomain); % remove extra samples after convolution
ray_filt=ray_filt(len:length(ray_filt)-len-1);
TDL=[TDL ray_filt'];
DOP=[DOP fftshift(abs(fft(ray_filt,NFFT)').^2)];
% =======================================================================
% Plotting TDL time-series
% =======================================================================
otheraxis=ones(length(timeaxis),1);
figure, hold
for ii=1:12
plot3(otheraxis.*TapNo(ii),timeaxis, abs(TDL(:,ii)),'k')
end
grid
view(3)
title('TDL time-series')
xlabel('Tap No.')
zlabel('Relative signal level (lin.units)')
ylabel('Time (s)')
figure, hold
for ii=1:12
plot3(otheraxis.*TAU(ii),timeaxis, 20*log10(abs(TDL(:,ii))),'k')
end
grid
view(3)
title('TDL time-series')
xlabel('Tap No.')
zlabel('Relative signal level (dB)')
ylabel('Time (s)')
% =======================================================================
% Plotting TDL Doppler spectra
% =======================================================================
freqaxis=[0:NFFT-1]*(fs/NFFT)-fs/2;
otheraxis2=ones(length(freqaxis),1);
figure, hold
for ii=1:12
plot3(otheraxis2.*TapNo(ii),freqaxis, DOP(:,ii),'k')
end
grid
view(3)
title('TDL Doppler spectra')
xlabel('Tap No.')
zlabel('Doppler spectrum')
ylabel('Doppler frequency (Hz)')
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -