library IEEE, IEEE_proposed;                                              use IEEE_proposed.ELECTRICAL_SYSTEMS.all;  use IEEE.MATH_REAL.all;  use WORK.all;entity BENCH is end BENCH;architecture TEST_PLL of BENCH is  constant  REF_TONE   :  REAL:= -30.0;  constant  REF_FREQ   :  REAL:= 1.0e06;  constant  REF_KF     :  REAL:= 1.0e09;  constant  PHASE_INI  :  REAL:= -math_pi/2.0;  constant  LO_TONE    :  REAL:= -30.0;  constant  LO_FREQ    :  REAL:= 1.0e06;  constant  LO_KF      :  REAL:= 1.0e09;  constant  MIXER_GAIN :  REAL:=   12.0;  constant  MIXER_IIP3 :  REAL:= -10.0;  constant  FILTER_GAIN:  REAL:=   0.0;  constant  FILTER_GRAD:  INTEGER:=  1;  constant  CORNER_FREQ:  REAL:= 1.0e5;  constant  R_S        :  REAL:= 50.0;  terminal N_REFCLK: ELECTRICAL;  terminal N_CLK: ELECTRICAL;  terminal N_CTRL: ELECTRICAL;  terminal N_VDD: ELECTRICAL;  terminal N_TP: ELECTRICAL;  terminal N_TPOUT: ELECTRICAL;  quantity V_VDD   across I_VDD   through N_VDD;  quantity V_VCTRL across I_VCTRL through N_CTRL;  quantity V_OUT   across I_OUT   through N_TPOUT;  signal CTRL: REAL:=0.0;  begin                                            V_VDD == 2.7;  CTRL<=0.0, 5.0E-5 after 100US, 1.0E-4 after 200US;  V_VCTRL == CTRL;  V_OUT == R_S * I_OUT;    SRC: entity VCO(ANALOG)    generic map ( AMPL_DBM => REF_TONE,                 FREQ_0    => REF_FREQ, 		 PHASE_0   => PHASE_INI, 		 K_FREQ    => REF_KF)    port map (P_CTRL => N_CTRL,	      P_OUT => N_REFCLK,	      VDD => N_VDD,	      GND => ELECTRICAL_REF);      FREQ_SYNTH: entity PLL(LINEAR)    generic map (VCO_TONE_DBM => LO_TONE,		 VCO_FREQ_0   => LO_FREQ,	         VCO_K_FREQ   => LO_KF,	         MIX_GAIN_DB  => MIXER_GAIN,	         MIX_IIP3     => MIXER_IIP3,	         LPF_GAIN_DB  => FILTER_GAIN,	         LPF_3DBFREQ  => CORNER_FREQ,	         LPF_GRADE    => FILTER_GRAD)    port map (P_REFCLK => N_REFCLK,	      P_OUT => N_TP,	      P_OUTCLK => N_CLK,	      P_VDD => N_VDD,	      P_GND => ELECTRICAL_REF);  LPF2: entity LOWPASS_FILTER (BHV_RF)    generic map ( GAIN => FILTER_GAIN,		  FG   => CORNER_FREQ,		  GRAD => 2)    port map (INP => N_TP,	      INN => ELECTRICAL_REF,	      OUTP => N_TPOUT,	      OUTN => ELECTRICAL_REF);end architecture TEST_PLL;