## Asterisk -- A telephony toolkit for Linux.## Top level Makefile## Copyright (C) 1999-2006, Digium, Inc.## Mark Spencer <markster@digium.com>## This program is free software, distributed under the terms of# the GNU General Public License## even though we could use '-include makeopts' here, use a wildcard# lookup anyway, so that make won't try to build makeopts if it doesn't# exist (other rules will force it to be built if needed)ifneq ($(wildcard makeopts),)  include makeoptsendifexport CCexport CPPexport INSTALLexport DESTDIRexport BASENAMEexport PBX_ZAPTELexport ZAPTEL_INCLUDEexport ASTSBINDIRexport ASTCFLAGSexport ASTLDFLAGSifneq ($(findstring BSD,$(OSARCH)),)  ASTCFLAGS+=-I/usr/local/include  ASTLDFLAGS+=-L/usr/local/libendif# Overwite config files on "make samples"OVERWRITE:=y# Staging directory# Files are copied here temporarily during the install process# For example, make DESTDIR=/tmp/asterisk-gui would put things in# /tmp/asterisk/etc/asterisk# !!! Watch out, put no spaces or comments after the value !!!#DESTDIR?=/tmp/asterisk-guiifeq ($(OSARCH),SunOS)  ASTETCDIR:=$(DESTDIR)/var/etc/asteriskelse  ASTETCDIR:=$(DESTDIR)$(sysconfdir)/asteriskendifASTETCDIR:=$(shell cat $(ASTETCDIR)  2>/dev/null | grep -v ^\; | grep astetcdir | cut -f 3 -d ' ')ifeq ($(ASTETCDIR),)  ifeq ($(OSARCH),SunOS)    ASTETCDIR:=$(DESTDIR)/var/etc/asterisk  else    ASTETCDIR:=$(DESTDIR)$(sysconfdir)/asterisk  endifendifASTVARLIBDIR?=$(shell cat $(ASTETCDIR)  2>/dev/null | grep -v ^\; | grep astvarlibdir | cut -f 3 -d ' ')ifeq ($(ASTVARLIBDIR),)  ifeq ($(OSARCH),SunOS)    ASTVARLIBDIR:=$(DESTDIR)/var/opt/asterisk  else    ifeq ($(OSARCH),FreeBSD)      ASTVARLIBDIR:=$(DESTDIR)$(prefix)/share/asterisk    else      ASTVARLIBDIR:=$(DESTDIR)$(localstatedir)/lib/asterisk    endif  endifendifASTSBINDIR?=$(shell cat $(ASTETCDIR)  2>/dev/null | grep -v ^\; | grep astsbindir | cut -f 3 -d ' ')ifeq ($(ASTSBINDIR),)  ifeq ($(OSARCH),SunOS)    ASTSBINDIR:=$(DESTDIR)/opt/asterisk/sbin  else    ASTSBINDIR:=$(DESTDIR)$(sbindir)  endifendififeq ($(ASTDATADIR),)  ASTDATADIR:=$(ASTVARLIBDIR)endifHTTPDIR:=$(ASTDATADIR)/static-httpCONFIGDIR:=$(HTTPDIR)/configHTTPHOST?=$(shell hostname)HTTPBINDPORT?=$(shell cat $(ASTETCDIR)/http.conf  2>/dev/null | grep -v ^\; | grep bindport | cut -f 2 -d '=')ifeq ($(HTTPBINDPORT),)  HTTPBINDPORT:=8088endifHTTPPREFIXBASE?=$(shell cat $(ASTETCDIR)/http.conf  2>/dev/null | grep -v ^\; | grep prefix )HTTPPREFIX?=$(shell echo $(HTTPPREFIXBASE) | cut -f 2 -d '=')ifeq ($(HTTPPREFIXBASE),)  HTTPPREFIX:=asteriskendifHTTPURL:=http://$(HTTPHOST):$(HTTPBINDPORT)/$(HTTPPREFIX)/static/config/cfgbasic.htmlHTTPSETUPURL:=http://$(HTTPHOST):$(HTTPBINDPORT)/$(HTTPPREFIX)/static/config/setup/install.htmlHTTPSETUPURL:=http://localhost:$(HTTPBINDPORT)/$(HTTPPREFIX)/static/config/setup/install.htmlSUBDIRS:=toolsSUBDIRS_CLEAN:=$(SUBDIRS:%=%-clean)SUBDIRS_INSTALL:=$(SUBDIRS:%=%-install)all: _all	@echo " +------- Asterisk-GUI Build Complete -------+"	@echo " + Asterisk-GUI has successfully been built, +"	@echo " + and can be installed by running:          +"	@echo " +                                           +"	@echo " +               $(MAKE) install                +"	@echo " +-------------------------------------------+"_all: makeopts $(SUBDIRS)$(SUBDIRS):	@$(MAKE) -C $@checkconfig:	@echo " --- Checking Asterisk configuration to see if it will support the GUI ---"	@echo -n "* Checking for http.conf: "	@if [ -f $(ASTETCDIR)/http.conf ]; then \		echo "OK" ; \	else \		echo "FAILED"; \		echo " -- Please run 'make samples' in *Asterisk* or " ; \		echo " -- create your own $(ASTETCDIR)/http.conf" ; \		exit 1; \	fi	@echo -n "* Checking for manager.conf: "	@if [ -f $(ASTETCDIR)/manager.conf ]; then \		echo "OK" ; \	else \		echo "FAILED"; \		echo " -- Please run 'make samples' in *Asterisk* or " ; \		echo " -- create your own $(ASTETCDIR)/manager.conf" ; \		exit 1; \	fi	@echo -n "* Checking if HTTP is enabled: "	@if grep -v ^\; $(ASTETCDIR)/http.conf | grep enabled | grep -q yes 2>/dev/null; then \		echo "OK" ; \	else \		echo "FAILED"; \		echo " -- Please be sure you have 'enabled = yes'" ; \		echo " -- in $(ASTETCDIR)/http.conf" ; \		exit 1; \	fi	@echo -n "* Checking if HTTP static support is enabled: "	@if grep -v ^\; $(ASTETCDIR)/http.conf | grep enablestatic | grep -q yes 2>/dev/null; then \		echo "OK" ; \	else \		echo "FAILED"; \		echo " -- Please be sure you have 'enablestatic = yes'" ; \		echo " -- in $(ASTETCDIR)/http.conf" ; \		exit 1; \	fi			@echo -n "* Checking if manager is enabled: "	@if grep -v ^\; $(ASTETCDIR)/manager.conf | grep ^enabled | grep -q yes 2>/dev/null; then \		echo "OK" ; \	else \		echo "FAILED"; \		echo " -- Please be sure you have 'enabled = yes'" ; \		echo " -- in $(ASTETCDIR)/manager.conf" ; \		exit 1; \	fi	@echo -n "* Checking if manager over HTTP is enabled: "	@if grep -v ^\; $(ASTETCDIR)/manager.conf | grep webenabled | grep -q yes 2>/dev/null; then \		echo "OK" ; \	else \		echo "FAILED"; \		echo " -- Please be sure you have 'webenabled = yes'" ; \		echo " -- in $(ASTETCDIR)/manager.conf" ; \		exit 1; \	fi	@echo " --- Everything looks good ---	"	@echo " * GUI should be available at $(HTTPURL) "	@echo " * Before using the GUI, Please visit the install page at $(HTTPSETUPURL) "	@echo "" 	@echo " * Note: If you have bindaddr=127.0.0.1 in $(ASTETCDIR)/http.conf "	@echo "   you will only be able to visit it from the local machine. "	@echo ""	@echo "   Example: $(HTTPLOCALURL)"	@echo ""	@echo " * The login and password should be an entry from $(ASTETCDIR)/manager.conf"	@echo "   which has 'config' permission in read and write.  For example:"	@echo ""	@echo "    [admin]"	@echo "    secret = mysecret$$$$"	@echo "    read = system,call,log,verbose,command,agent,config"	@echo "    write = system,call,log,verbose,command,agent,config"	@echo ""	@echo " --- Good luck! ---	"$(SUBDIRS_INSTALL):	@ASTSBINDIR="$(ASTSBINDIR)" $(MAKE) -C $(@:-install=) install_install: _all $(SUBDIRS_INSTALL)	mkdir -p $(ASTETCDIR)	@echo "Installing into $(HTTPDIR)"	mkdir -p $(CONFIGDIR)	mkdir -p $(CONFIGDIR)/images	mkdir -p $(CONFIGDIR)/scripts	mkdir -p $(CONFIGDIR)/stylesheets	mkdir -p $(CONFIGDIR)/bkps	mkdir -p $(CONFIGDIR)/setup	mkdir -p $(CONFIGDIR)/graphs	mkdir -p $(ASTETCDIR)/scripts	@for x in gui_configs/*; do \		echo "$$x  -->  $(ASTETCDIR)" ; \		cp $$x $(ASTETCDIR)/ ; \	done	@for x in scripts/*; do \		echo "$$x  -->  $(ASTETCDIR)/scripts" ; \		cp $$x $(ASTETCDIR)/scripts ; \	done	@for x in config/images/*; do \		echo "$$x  -->  $(CONFIGDIR)/images/" ; \		$(INSTALL) -m 644 $$x $(CONFIGDIR)/images/ ; \	done	@for x in config/scripts/*; do \		echo "$$x  -->  $(CONFIGDIR)/scripts/" ; \		$(INSTALL) -m 644 $$x $(CONFIGDIR)/scripts/ ; \	done	@for x in config/setup/*; do \		echo "$$x  -->  $(CONFIGDIR)/setup/" ; \		$(INSTALL) -m 644 $$x $(CONFIGDIR)/setup/ ; \	done	@for x in config/stylesheets/*; do \		echo "$$x  -->  $(CONFIGDIR)/stylesheets/" ; \		$(INSTALL) -m 644 $$x $(CONFIGDIR)/stylesheets/ ; \	done	@for x in config/*.html; do \		echo "$$x  -->  $(CONFIGDIR)" ; \		$(INSTALL) -m 644 $$x $(CONFIGDIR)/ ; \	done	@for x in config/graphs/*; do \		echo "$$x  -->  $(CONFIGDIR)/graphs" ; \		$(INSTALL) -m 644 $$x $(CONFIGDIR)/graphs ; \	done	@if [ -x /usr/sbin/asterisk-gui-post-install ]; then \		/usr/sbin/asterisk-gui-post-install $(DESTDIR) . ; \	fiinstall: _install	@echo " +---- Asterisk GUI Installation Complete ---+"	@echo " +                                           +"	@echo " +    YOU MUST READ THE SECURITY DOCUMENT    +"	@echo " +                                           +"	@echo " + Asterisk-GUI has successfully been        +"	@echo " + installed.  If you would like to install  +"	@echo " + the addtional sample configuration files  +"	@echo " + (overwriting any existing config files),  +"	@echo " + run:                                      +"	@echo " +                                           +"	@echo " +               $(MAKE) samples                +"	@echo " +                                           +"	@echo " +-------------------------------------------+"	@echo " +                                           +"	@echo " +          BEFORE THE GUI WILL WORK         +"	@echo " +                                           +"	@echo " + Before the GUI will run, you must perform +"	@echo " + some modifications to the Asterisk        +"	@echo " + configuration files in accordance with    +"	@echo " + the README file.  When done, you can      +"	@echo " + check your changes by doing:              +"	@echo " +                                           +"	@echo " +               $(MAKE) checkconfig            +"	@echo " +                                           +"	@echo " +-------------------------------------------+"$(SUBDIRS_CLEAN):	@$(MAKE) -C $(@:-clean=) cleanclean: $(SUBDIRS_CLEAN)distclean: clean	-rm -f makeopts config.log config.status	-rm -rf autom4te.cachesamples:	mkdir -p $(ASTETCDIR)	for x in configs/*.sample; do \		if [ -f $(ASTETCDIR)/`$(BASENAME) $$x .sample` ]; then \			if [ "$(OVERWRITE)" = "y" ]; then \				if cmp -s $(ASTETCDIR)/`$(BASENAME) $$x .sample` $$x ; then \					echo "Config file $$x is unchanged"; \					continue; \				fi ; \				mv -f $(ASTETCDIR)/`$(BASENAME) $$x .sample` $(ASTETCDIR)/`$(BASENAME) $$x .sample`.old ; \			else \				echo "Skipping config file $$x"; \				continue; \			fi ;\		fi ; \		$(INSTALL) -m 644 $$x $(ASTETCDIR)/`$(BASENAME) $$x .sample` ;\	donemakeopts: configure	@echo "****"	@echo "**** The configure script must be executed before running '$(MAKE)'."	@echo "****"	@exit 1.PHONY: samples clean all install _all _install checkconfig distclean $(SUBDIRS_CLEAN) $(SUBDIRS_INSTALL) $(SUBDIRS)