//******************************************************************************
//  MSP430F54x Demo - WDT+ Failsafe Clock, WDT mode, DCO SMCLK
//
//  Description; Allow WDT+ in watchdog mode to timeout. Toggle P1.0 in main
//  function. LPM4 is entered, this example will demonstrate WDT+ feature
//  of preventing WDT+ clock to be disabled.
//  The WDT+ will not allow active WDT+ clock to be disabled by software, the
//  LED continues to Flash because the WDT times out normally (in 32768 DCOCLK
//  cycles) even though software has attempted to disable WDT+ clock source.
//  ACLK = n/a, MCLK = SMCLK = default DCO ~1.045MHz
//
//                MSP430F5438
//             -----------------
//         /|\|                 |
//          | |                 |
//          --|RST              |
//            |                 |
//            |             P1.0|-->LED
//
//   M Smertneck / W. Goh
//   Texas Instruments Inc.
//   September 2008
//   Built with CCE Version: 3.2.2 and IAR Embedded Workbench Version: 4.11B
//******************************************************************************

#include "msp430x54x.h"

void main(void)
{
  P1DIR |= 0x01;                            // Set P1.0 to output - SET BREAKPOINT HERE
  P1OUT ^= 0x01;                            // Toggle P1.0
  
  __bis_SR_register(LPM4_bits + GIE);       // Enter LPM4, Stop all clocks
  __no_operation();                         // For debugger  
}