if SendToDriver(FNCNumberDoSetOutDataPort,Param1,Param2,OutputData,OutLength) then
      Result:=NO_ERROR;
    SetEvent(SerializationEvent);
  end;
//-------------------------------------------------------------------------------------------------------
function DoSetOutDataPort(DataOutByte:byte):integer;  stdcall export;
//;set data bits (if are bits as input, then set theirs pull-ups)
  begin
    Result:=DoSetOutDataPorts(DataOutByte,DataOutByte,DataOutByte,$FF);
  end;
//-------------------------------------------------------------------------------------------------------
function DoGetOutDataPorts(var DataOutByteB, DataOutByteC, DataOutByteD:byte; var UsedPorts:byte):integer;  stdcall export;
//;get data bits (if are bits as input, then get theirs pull-ups)
  begin
    if WaitForSingleObject(SerializationEvent,SerializationEventTimeout)=WAIT_TIMEOUT then
      begin
        ShowThreadErrorMessage;
        Result:=DEVICE_NOT_PRESENT;
        Exit;
      end;
    Result:=DEVICE_NOT_PRESENT;
    OutLength:=3;
    if not SendToDriver(FNCNumberDoGetOutDataPort,0,0,OutputData,OutLength) then
      begin
        SetEvent(SerializationEvent);
        Exit;
      end;
    UsedPorts:=0;
    if (OutLength>0)and(@DataOutByteB<>nil) then
      begin
        DataOutByteB:=OutputData[0];
        UsedPorts:=UsedPorts or 1;
      end;
    if (OutLength>1)and(@DataOutByteC<>nil) then
      begin
        DataOutByteC:=OutputData[1];
        UsedPorts:=UsedPorts or 2;
      end;
    if (OutLength>2)and(@DataOutByteD<>nil) then
      begin
        DataOutByteD:=OutputData[2];
        UsedPorts:=UsedPorts or 4;
      end;
    Result:=NO_ERROR;
    SetEvent(SerializationEvent);
  end;
//-------------------------------------------------------------------------------------------------------
function DoGetOutDataPort(var DataOutByte:byte):integer;  stdcall export;
//;get data bits (if are bits as input, then get theirs pull-ups)
  var
    Dummy:byte;
  begin
    Result:=DoGetOutDataPorts(DataOutByte,Dummy,Dummy,Dummy);
  end;
//-------------------------------------------------------------------------------------------------------
function DoGetInDataPorts(var DataInByteB, DataInByteC, DataInByteD:byte; var UsedPorts:byte):integer;  stdcall export;
//;get data bits - pin reading
  begin
    if WaitForSingleObject(SerializationEvent,SerializationEventTimeout)=WAIT_TIMEOUT then
      begin
        ShowThreadErrorMessage;
        Result:=DEVICE_NOT_PRESENT;
        Exit;
      end;
    Result:=DEVICE_NOT_PRESENT;
    OutLength:=3;
    if not SendToDriver(FNCNumberDoGetInDataPort,0,0,OutputData,OutLength) then
      begin
        SetEvent(SerializationEvent);
        Exit;
      end;
    UsedPorts:=0;
    if (OutLength>0)and(@DataInByteB<>nil) then
      begin
        DataInByteB:=OutputData[0];
        UsedPorts:=UsedPorts or 1;
      end;
    if (OutLength>1)and(@DataInByteC<>nil) then
      begin
        DataInByteC:=OutputData[1];
        UsedPorts:=UsedPorts or 2;
      end;
    if (OutLength>2)and(@DataInByteD<>nil) then
      begin
        DataInByteD:=OutputData[2];
        UsedPorts:=UsedPorts or 4;
      end;
    Result:=NO_ERROR;
    SetEvent(SerializationEvent);
  end;
//-------------------------------------------------------------------------------------------------------
function DoGetInDataPort(var DataInByte:byte):integer;  stdcall export;
//;get data bits - pin reading
  var
    Dummy:byte;
  begin
    Result:=DoGetInDataPorts(DataInByte,Dummy,Dummy,Dummy);
  end;
//-------------------------------------------------------------------------------------------------------
function DoSetRS232DataBits(DataBits:byte):integer;  stdcall export;
//;set databits number of RS232
  begin
    if not(DataBits in [5,6,7,8]) then
      begin
        Result:=INVALID_DATABITS;
        Exit;
      end;
    DataBits:=DataBits-5;
    if WaitForSingleObject(SerializationEvent,SerializationEventTimeout)=WAIT_TIMEOUT then
      begin
        ShowThreadErrorMessage;
        Result:=DEVICE_NOT_PRESENT;
        Exit;
      end;
    Result:=DEVICE_NOT_PRESENT;
    OutLength:=1;
    if SendToDriver(FNCNumberDoSetRS232DataBits,DataBits,0,OutputData,OutLength) then
      Result:=NO_ERROR;
    SetEvent(SerializationEvent);
  end;
//-------------------------------------------------------------------------------------------------------
function DoGetRS232DataBits(var DataBits:byte):integer;  stdcall export;
//;get databits number of RS232
  begin
    if WaitForSingleObject(SerializationEvent,SerializationEventTimeout)=WAIT_TIMEOUT then
      begin
        ShowThreadErrorMessage;
        Result:=DEVICE_NOT_PRESENT;
        Exit;
      end;
    Result:=DEVICE_NOT_PRESENT;
    OutLength:=1;
    if not SendToDriver(FNCNumberDoGetRS232DataBits,0,0,OutputData,OutLength) then
      begin
        SetEvent(SerializationEvent);
        Exit;
      end;
    DataBits:=OutputData[0]+5;
    Result:=NO_ERROR;
    SetEvent(SerializationEvent);
  end;
//-------------------------------------------------------------------------------------------------------
function DoSetRS232Parity(Parity:byte):integer;  stdcall export;
//;set parity of RS232
  const
    ParityNone		=0;
    ParityOdd		=1;
    ParityEven		=2;
    ParityMark		=3;
    ParitySpace		=4;
  begin
    if not(Parity in [ParityNone,ParityOdd,ParityEven,ParityMark,ParitySpace]) then
      begin
        Result:=INVALID_PARITY;
        Exit;
      end;
    if WaitForSingleObject(SerializationEvent,SerializationEventTimeout)=WAIT_TIMEOUT then
      begin
        ShowThreadErrorMessage;
        Result:=DEVICE_NOT_PRESENT;
        Exit;
      end;
    Result:=DEVICE_NOT_PRESENT;
    OutLength:=1;
    if SendToDriver(FNCNumberDoSetRS232Parity,Parity,0,OutputData,OutLength) then
      Result:=NO_ERROR;
    SetEvent(SerializationEvent);
  end;
//-------------------------------------------------------------------------------------------------------
function DoGetRS232Parity(var Parity:byte):integer;  stdcall export;
//;get parity of RS232
  begin
    if WaitForSingleObject(SerializationEvent,SerializationEventTimeout)=WAIT_TIMEOUT then
      begin
        ShowThreadErrorMessage;
        Result:=DEVICE_NOT_PRESENT;
        Exit;
      end;
    Result:=DEVICE_NOT_PRESENT;
    OutLength:=1;
    if not SendToDriver(FNCNumberDoGetRS232Parity,0,0,OutputData,OutLength) then
      begin
        SetEvent(SerializationEvent);
        Exit;
      end;
    Parity:=OutputData[0];
    Result:=NO_ERROR;
    SetEvent(SerializationEvent);
  end;
//-------------------------------------------------------------------------------------------------------
function DoSetRS232StopBits(StopBits:byte):integer;  stdcall export;
//;set stopbits of RS232
  const
    StopBit1		=0;
    StopBit2		=1;
  begin
    if not(StopBits in [StopBit1,StopBit2]) then
      begin
        Result:=INVALID_STOPBITS;
        Exit;
      end;
    if WaitForSingleObject(SerializationEvent,SerializationEventTimeout)=WAIT_TIMEOUT then
      begin
        ShowThreadErrorMessage;
        Result:=DEVICE_NOT_PRESENT;
        Exit;
      end;
    Result:=DEVICE_NOT_PRESENT;
    OutLength:=1;
    if SendToDriver(FNCNumberDoSetRS232StopBits,StopBits,0,OutputData,OutLength) then
      Result:=NO_ERROR;
    SetEvent(SerializationEvent);
  end;
//-------------------------------------------------------------------------------------------------------
function DoGetRS232StopBits(var StopBits:byte):integer;  stdcall export;
//;get stopbits of RS232
  begin
    if WaitForSingleObject(SerializationEvent,SerializationEventTimeout)=WAIT_TIMEOUT then
      begin
        ShowThreadErrorMessage;
        Result:=DEVICE_NOT_PRESENT;
        Exit;
      end;
    Result:=DEVICE_NOT_PRESENT;
    OutLength:=1;
    if not SendToDriver(FNCNumberDoGetRS232StopBits,0,0,OutputData,OutLength) then
      begin
        SetEvent(SerializationEvent);
        Exit;
      end;
    StopBits:=OutputData[0];
    Result:=NO_ERROR;
    SetEvent(SerializationEvent);
  end;
//-------------------------------------------------------------------------------------------------------
function DoEEPROMRead(Address:word; var DataInByte:byte):integer;  stdcall export;
//;read EEPROM from given address
  begin
    if WaitForSingleObject(SerializationEvent,SerializationEventTimeout)=WAIT_TIMEOUT then
      begin
        ShowThreadErrorMessage;
        Result:=DEVICE_NOT_PRESENT;
        Exit;
      end;
    Result:=DEVICE_NOT_PRESENT;
    OutLength:=1;
    if not SendToDriver(FNCNumberDoEEPROMRead,Address,0,OutputData,OutLength) then
      begin
        SetEvent(SerializationEvent);
        Exit;
      end;
    DataInByte:=OutputData[0];
    Result:=NO_ERROR;
    SetEvent(SerializationEvent);
  end;
//-------------------------------------------------------------------------------------------------------
function DoEEPROMWrite(Address:word; DataOutByte:byte):integer;  stdcall export;
//;write data byte to EEPROM to given address
  begin
    if WaitForSingleObject(SerializationEvent,SerializationEventTimeout)=WAIT_TIMEOUT then
      begin
        ShowThreadErrorMessage;
        Result:=DEVICE_NOT_PRESENT;
        Exit;
      end;
    Result:=DEVICE_NOT_PRESENT;
    OutLength:=1;
    if SendToDriver(FNCNumberDoEEPROMWrite,Address,DataOutByte,OutputData,OutLength) then
      Result:=NO_ERROR;
    SetEvent(SerializationEvent);
  end;
//-------------------------------------------------------------------------------------------------------
function DoRS232Send(DataOutByte:byte):integer;  stdcall export;
//;send one data byte to RS232 line
  begin
    if WaitForSingleObject(SerializationEvent,SerializationEventTimeout)=WAIT_TIMEOUT then
      begin
        ShowThreadErrorMessage;
        Result:=DEVICE_NOT_PRESENT;
        Exit;
      end;
    Result:=DEVICE_NOT_PRESENT;
    OutLength:=1;
    if SendToDriver(FNCNumberDoRS232Send,DataOutByte,0,OutputData,OutLength) then
      Result:=NO_ERROR;
    SetEvent(SerializationEvent);
  end;
//-------------------------------------------------------------------------------------------------------
function DoRS232Read(var DataInByte:byte):integer;  stdcall export;
//;read one data byte from serial line (only when FIFO not implemented in device)
  begin
    if WaitForSingleObject(SerializationEvent,SerializationEventTimeout)=WAIT_TIMEOUT then
      begin
        ShowThreadErrorMessage;
        Result:=DEVICE_NOT_PRESENT;
        Exit;
      end;
    Result:=DEVICE_NOT_PRESENT;
    OutLength:=3;
    if not SendToDriver(FNCNumberDoRS232Read,0,0,OutputData,OutLength)then
      begin
        SetEvent(SerializationEvent);
        Exit;
      end;
    if OutLength=2 then
      begin
        Result:=NO_DATA_AVAILABLE;
        SetEvent(SerializationEvent);
        Exit;
      end;
    Result:=NO_ERROR;
    if OutLength=3 then
      begin
        Result:=OVERRUN_ERROR;
      end;
    DataInByte:=OutputData[0];
    SetEvent(SerializationEvent);
  end;
//-------------------------------------------------------------------------------------------------------
function DoSetRS232Baud(BaudRate:integer):integer;  stdcall export;
//;set baud speed of serial line
//BAUD=12e6/(16*(WORD+1))
  var
    BaudRateByte:word;
    BaudRateDouble:double;
    BaudError:double;
    MaxBaudRateByte:integer;
  const
    Error=0.04; //4% max chyba
    MaxError=1+Error;
    MinError=1-Error;
  begin
    DoGetRS232Baud(MaxBaudRateByte);
    if UARTx2Mode then
      begin
        MaxBaudRateByte:=4095;
        BaudRate:=Round(BaudRate/2);
      end
    else
      begin
        MaxBaudRateByte:=255;
      end;
    Result:=INVALID_BAUDRATE;
    if BaudRate >= 12e6/16*MaxError then Exit;
    if BaudRate <= 12e6/(16*(MaxBaudRateByte+1))*MinError then Exit;
    BaudRateDouble:=Round(12e6/(16*BaudRate)-1);
    if BaudRateDouble<0 then BaudRateDouble:=0;
    if BaudRateDouble>MaxBaudRateByte then BaudRateDouble:=MaxBaudRateByte;
    BaudError:=12e6/(16*(BaudRateDouble+1))/BaudRate;
    if BaudError>MaxError then Exit;
    if BaudError<MinError then Exit;
    BaudRateByte:=Round(BaudRateDouble);

    if WaitForSingleObject(SerializationEvent,SerializationEventTimeout)=WAIT_TIMEOUT then
      begin
        ShowThreadErrorMessage;
        Result:=DEVICE_NOT_PRESENT;