/* linux/drivers/mtd/nand/s3c2410.c * * Copyright (c) 2004,2005 Simtec Electronics *	http://www.simtec.co.uk/products/SWLINUX/ *	Ben Dooks <ben@simtec.co.uk> * * Samsung S3C2410/S3C240 NAND driver * * Changelog: *	21-Sep-2004  BJD  Initial version *	23-Sep-2004  BJD  Mulitple device support *	28-Sep-2004  BJD  Fixed ECC placement for Hardware mode *	12-Oct-2004  BJD  Fixed errors in use of platform data *	18-Feb-2005  BJD  Fix sparse errors *	14-Mar-2005  BJD  Applied tglx's code reduction patch *	02-May-2005  BJD  Fixed s3c2440 support *	02-May-2005  BJD  Reduced hwcontrol decode *	20-Jun-2005  BJD  Updated s3c2440 support, fixed timing bug *	08-Jul-2005  BJD  Fix OOPS when no platform data supplied *	20-Oct-2005  BJD  Fix timing calculation bug * * $Id: s3c2410.c,v 1.20 2005/11/07 11:14:31 gleixner Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA*/#include <config/mtd/nand/s3c2410/hwecc.h>#include <config/mtd/nand/s3c2410/debug.h>#ifdef CONFIG_MTD_NAND_S3C2410_DEBUG#define DEBUG#endif#include <linux/module.h>#include <linux/types.h>#include <linux/init.h>#include <linux/kernel.h>#include <linux/string.h>#include <linux/ioport.h>#include <linux/platform_device.h>#include <linux/delay.h>#include <linux/err.h>#include <linux/slab.h>#include <linux/clk.h>#include <linux/mtd/mtd.h>#include <linux/mtd/nand.h>#include <linux/mtd/nand_ecc.h>#include <linux/mtd/partitions.h>#include <asm/io.h>#include <asm/arch/regs-nand.h>#include <asm/arch/nand.h>#define PFX "s3c2410-nand: "#ifdef CONFIG_MTD_NAND_S3C2410_HWECCstatic int hardware_ecc = 1;#elsestatic int hardware_ecc = 0;#endif/* new oob placement block for use with hardware ecc generation */static struct nand_oobinfo nand_hw_eccoob = {	.useecc		= MTD_NANDECC_AUTOPLACE,	.eccbytes	= 3,	.eccpos		= {0, 1, 2 },	.oobfree	= { {8, 8} }};/* controller and mtd information */struct s3c2410_nand_info;struct s3c2410_nand_mtd {	struct mtd_info			mtd;	struct nand_chip		chip;	struct s3c2410_nand_set		*set;	struct s3c2410_nand_info	*info;	int				scan_res;};/* overview of the s3c2410 nand state */struct s3c2410_nand_info {	/* mtd info */	struct nand_hw_control		controller;	struct s3c2410_nand_mtd		*mtds;	struct s3c2410_platform_nand	*platform;	/* device info */	struct device			*device;	struct resource			*area;	struct clk			*clk;	void __iomem			*regs;	int				mtd_count;	unsigned char			is_s3c2440;};/* conversion functions */static struct s3c2410_nand_mtd *s3c2410_nand_mtd_toours(struct mtd_info *mtd){	return container_of(mtd, struct s3c2410_nand_mtd, mtd);}static struct s3c2410_nand_info *s3c2410_nand_mtd_toinfo(struct mtd_info *mtd){	return s3c2410_nand_mtd_toours(mtd)->info;}static struct s3c2410_nand_info *to_nand_info(struct platform_device *dev){	return platform_get_drvdata(dev);}static struct s3c2410_platform_nand *to_nand_plat(struct platform_device *dev){	return dev->dev.platform_data;}/* timing calculations */#define NS_IN_KHZ 1000000static int s3c2410_nand_calc_rate(int wanted, unsigned long clk, int max){	int result;	result = (wanted * clk) / NS_IN_KHZ;	result++;	pr_debug("result %d from %ld, %d\n", result, clk, wanted);	if (result > max) {		printk("%d ns is too big for current clock rate %ld\n",		       wanted, clk);		return -1;	}	if (result < 1)		result = 1;	return result;}#define to_ns(ticks,clk) (((ticks) * NS_IN_KHZ) / (unsigned int)(clk))/* controller setup */static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,			       struct platform_device *pdev){	struct s3c2410_platform_nand *plat = to_nand_plat(pdev);	unsigned long clkrate = clk_get_rate(info->clk);	int tacls, twrph0, twrph1;	unsigned long cfg;	/* calculate the timing information for the controller */	clkrate /= 1000;	/* turn clock into kHz for ease of use */	if (plat != NULL) {		tacls  = s3c2410_nand_calc_rate(plat->tacls, clkrate, 4);		twrph0 = s3c2410_nand_calc_rate(plat->twrph0, clkrate, 8);		twrph1 = s3c2410_nand_calc_rate(plat->twrph1, clkrate, 8);	} else {		/* default timings */		tacls = 4;		twrph0 = 8;		twrph1 = 8;	}	if (tacls < 0 || twrph0 < 0 || twrph1 < 0) {		printk(KERN_ERR PFX "cannot get timings suitable for board\n");		return -EINVAL;	}	printk(KERN_INFO PFX "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n",	       tacls, to_ns(tacls, clkrate),	       twrph0, to_ns(twrph0, clkrate),	       twrph1, to_ns(twrph1, clkrate));	if (!info->is_s3c2440) {		cfg  = S3C2410_NFCONF_EN;		cfg |= S3C2410_NFCONF_TACLS(tacls-1);		cfg |= S3C2410_NFCONF_TWRPH0(twrph0-1);		cfg |= S3C2410_NFCONF_TWRPH1(twrph1-1);	} else {		cfg   = S3C2440_NFCONF_TACLS(tacls-1);		cfg  |= S3C2440_NFCONF_TWRPH0(twrph0-1);		cfg  |= S3C2440_NFCONF_TWRPH1(twrph1-1);	}	pr_debug(PFX "NF_CONF is 0x%lx\n", cfg);	writel(cfg, info->regs + S3C2410_NFCONF);	return 0;}/* select chip */static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip){	struct s3c2410_nand_info *info;	struct s3c2410_nand_mtd *nmtd;	struct nand_chip *this = mtd->priv;	void __iomem *reg;	unsigned long cur;	unsigned long bit;	nmtd = this->priv;	info = nmtd->info;	bit = (info->is_s3c2440) ? S3C2440_NFCONT_nFCE : S3C2410_NFCONF_nFCE;	reg = info->regs+((info->is_s3c2440) ? S3C2440_NFCONT:S3C2410_NFCONF);	cur = readl(reg);	if (chip == -1) {		cur |= bit;	} else {		if (nmtd->set != NULL && chip > nmtd->set->nr_chips) {			printk(KERN_ERR PFX "chip %d out of range\n", chip);			return;		}		if (info->platform != NULL) {			if (info->platform->select_chip != NULL)				(info->platform->select_chip)(nmtd->set, chip);		}		cur &= ~bit;	}	writel(cur, reg);}/* command and control functions * * Note, these all use tglx's method of changing the IO_ADDR_W field * to make the code simpler, and use the nand layer's code to issue the * command and address sequences via the proper IO ports. **/static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd){	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);	struct nand_chip *chip = mtd->priv;	switch (cmd) {	case NAND_CTL_SETNCE:	case NAND_CTL_CLRNCE:		printk(KERN_ERR "%s: called for NCE\n", __FUNCTION__);		break;	case NAND_CTL_SETCLE:		chip->IO_ADDR_W = info->regs + S3C2410_NFCMD;		break;	case NAND_CTL_SETALE:		chip->IO_ADDR_W = info->regs + S3C2410_NFADDR;		break;		/* NAND_CTL_CLRCLE: */		/* NAND_CTL_CLRALE: */	default:		chip->IO_ADDR_W = info->regs + S3C2410_NFDATA;		break;	}}/* command and control functions */static void s3c2440_nand_hwcontrol(struct mtd_info *mtd, int cmd){	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);	struct nand_chip *chip = mtd->priv;	switch (cmd) {	case NAND_CTL_SETNCE:	case NAND_CTL_CLRNCE:		printk(KERN_ERR "%s: called for NCE\n", __FUNCTION__);		break;	case NAND_CTL_SETCLE:		chip->IO_ADDR_W = info->regs + S3C2440_NFCMD;		break;	case NAND_CTL_SETALE:		chip->IO_ADDR_W = info->regs + S3C2440_NFADDR;		break;		/* NAND_CTL_CLRCLE: */		/* NAND_CTL_CLRALE: */	default:		chip->IO_ADDR_W = info->regs + S3C2440_NFDATA;		break;	}}/* s3c2410_nand_devready() * * returns 0 if the nand is busy, 1 if it is ready*/static int s3c2410_nand_devready(struct mtd_info *mtd){	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);	if (info->is_s3c2440)		return readb(info->regs + S3C2440_NFSTAT) & S3C2440_NFSTAT_READY;	return readb(info->regs + S3C2410_NFSTAT) & S3C2410_NFSTAT_BUSY;}/* ECC handling functions */static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,				     u_char *read_ecc, u_char *calc_ecc){	pr_debug("s3c2410_nand_correct_data(%p,%p,%p,%p)\n",		 mtd, dat, read_ecc, calc_ecc);	pr_debug("eccs: read %02x,%02x,%02x vs calc %02x,%02x,%02x\n",		 read_ecc[0], read_ecc[1], read_ecc[2],		 calc_ecc[0], calc_ecc[1], calc_ecc[2]);	if (read_ecc[0] == calc_ecc[0] &&	    read_ecc[1] == calc_ecc[1] &&	    read_ecc[2] == calc_ecc[2])		return 0;	/* we curently have no method for correcting the error */	return -1;}/* ECC functions * * These allow the s3c2410 and s3c2440 to use the controller's ECC * generator block to ECC the data as it passes through]*/static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode){	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);	unsigned long ctrl;	ctrl = readl(info->regs + S3C2410_NFCONF);