# Microsoft eMbedded Visual Tools Project File - Name="GPIO_VIEWER" - Package Owner=<4>
# Microsoft eMbedded Visual Tools Generated Build File, Format Version 6.02
# ** DO NOT EDIT **

# TARGTYPE "Win32 (WCE ARMV4I) Application" 0xa501

CFG=GPIO_VIEWER - Win32 (WCE ARMV4I) Debug
!MESSAGE This is not a valid makefile. To build this project using NMAKE,
!MESSAGE use the Export Makefile command and run
!MESSAGE 
!MESSAGE NMAKE /f "GPIO_VIEWER.VCN".
!MESSAGE 
!MESSAGE You can specify a configuration when running NMAKE
!MESSAGE by defining the macro CFG on the command line. For example:
!MESSAGE 
!MESSAGE NMAKE /f "GPIO_VIEWER.VCN" CFG="GPIO_VIEWER - Win32 (WCE ARMV4I) Debug"
!MESSAGE 
!MESSAGE Possible choices for configuration are:
!MESSAGE 
!MESSAGE "GPIO_VIEWER - Win32 (WCE ARMV4I) Release" (based on "Win32 (WCE ARMV4I) Application")
!MESSAGE "GPIO_VIEWER - Win32 (WCE ARMV4I) Debug" (based on "Win32 (WCE ARMV4I) Application")
!MESSAGE 

# Begin Project
# PROP AllowPerConfigDependencies 0
# PROP Scc_ProjName ""
# PROP Scc_LocalPath ""
# PROP ATL_Project 2
CPP=clarm.exe
MTL=midl.exe
RSC=rc.exe

!IF  "$(CFG)" == "GPIO_VIEWER - Win32 (WCE ARMV4I) Release"

# PROP BASE Use_MFC 2
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "ARMV4IRel"
# PROP BASE Intermediate_Dir "ARMV4IRel"
# PROP BASE CPU_ID "{DC70F430-E78B-494F-A9D5-62ADC56443B8}"
# PROP BASE Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
# PROP BASE Target_Dir ""
# PROP Use_MFC 2
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "ARMV4IRel"
# PROP Intermediate_Dir "ARMV4IRel"
# PROP CPU_ID "{DC70F430-E78B-494F-A9D5-62ADC56443B8}"
# PROP Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
# PROP Target_Dir ""
# ADD BASE RSC /l 0x409 /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "UNICODE" /d "_UNICODE" /d "NDEBUG" /d "$(CePlatform)" /d "THUMB" /d "_THUMB_" /d "ARM" /d "_ARM_" /d "ARMV4I" /d "_AFXDLL" /r
# ADD RSC /l 0x409 /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "UNICODE" /d "_UNICODE" /d "NDEBUG" /d "$(CePlatform)" /d "THUMB" /d "_THUMB_" /d "ARM" /d "_ARM_" /d "ARMV4I" /d "_AFXDLL" /r
# ADD BASE CPP /nologo /W3 /GX- /D "ARM" /D "_ARM_" /D "ARMV4I" /D UNDER_CE=$(CEVersion) /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "UNICODE" /D "_UNICODE" /D "NDEBUG" /D "_AFXDLL" /Yu"stdafx.h" /QRarch4T /QRinterwork-return /O2 /M$(CECrtMT)  /c
# ADD CPP /nologo /W3 /GX- /D "ARM" /D "_ARM_" /D "ARMV4I" /D UNDER_CE=$(CEVersion) /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "UNICODE" /D "_UNICODE" /D "NDEBUG" /D "_AFXDLL" /Yu"stdafx.h" /QRarch4T /QRinterwork-return /O2 /M$(CECrtMT)  /c
# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /o "NUL" /win32
# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /o "NUL" /win32
BSC32=bscmake.exe
# ADD BASE BSC32 /nologo
# ADD BSC32 /nologo
LINK32=link.exe
# ADD BASE LINK32 /nologo /base:"0x00010000" /stack:0x10000,0x1000 /entry:"wWinMainCRTStartup" /subsystem:$(CESubsystem) /MACHINE:THUMB
# ADD LINK32 /nologo /base:"0x00010000" /stack:0x10000,0x1000 /entry:"wWinMainCRTStartup" /subsystem:$(CESubsystem) /MACHINE:THUMB

!ELSEIF  "$(CFG)" == "GPIO_VIEWER - Win32 (WCE ARMV4I) Debug"

# PROP BASE Use_MFC 2
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "ARMV4IDbg"
# PROP BASE Intermediate_Dir "ARMV4IDbg"
# PROP BASE CPU_ID "{DC70F430-E78B-494F-A9D5-62ADC56443B8}"
# PROP BASE Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
# PROP BASE Target_Dir ""
# PROP Use_MFC 2
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "ARMV4IDbg"
# PROP Intermediate_Dir "ARMV4IDbg"
# PROP CPU_ID "{DC70F430-E78B-494F-A9D5-62ADC56443B8}"
# PROP Platform_ID "{8A9A2F80-6887-11D3-842E-005004848CBA}"
# PROP Target_Dir ""
# ADD BASE RSC /l 0x409 /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "UNICODE" /d "_UNICODE" /d "DEBUG" /d "$(CePlatform)" /d "THUMB" /d "_THUMB_" /d "ARM" /d "_ARM_" /d "ARMV4I" /d "_AFXDLL" /r
# ADD RSC /l 0x409 /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "UNICODE" /d "_UNICODE" /d "DEBUG" /d "$(CePlatform)" /d "THUMB" /d "_THUMB_" /d "ARM" /d "_ARM_" /d "ARMV4I" /d "_AFXDLL" /r
# ADD BASE CPP /nologo /W3 /GX- /Zi /Od /D "DEBUG" /D "ARM" /D "_ARM_" /D "ARMV4I" /D UNDER_CE=$(CEVersion) /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "UNICODE" /D "_UNICODE" /D "_AFXDLL" /Yu"stdafx.h" /QRarch4T /QRinterwork-return /M$(CECrtMTDebug)  /c
# ADD CPP /nologo /W3 /GX- /Zi /Od /D "DEBUG" /D "ARM" /D "_ARM_" /D "ARMV4I" /D UNDER_CE=$(CEVersion) /D _WIN32_WCE=$(CEVersion) /D "$(CePlatform)" /D "UNICODE" /D "_UNICODE" /D "_AFXDLL" /Yu"stdafx.h" /QRarch4T /QRinterwork-return /M$(CECrtMTDebug)  /c
# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /o "NUL" /win32
# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /o "NUL" /win32
BSC32=bscmake.exe
# ADD BASE BSC32 /nologo
# ADD BSC32 /nologo
LINK32=link.exe
# ADD BASE LINK32 /nologo /base:"0x00010000" /stack:0x10000,0x1000 /entry:"wWinMainCRTStartup" /debug /subsystem:$(CESubsystem) /MACHINE:THUMB
# ADD LINK32 /nologo /base:"0x00010000" /stack:0x10000,0x1000 /entry:"wWinMainCRTStartup" /debug /subsystem:$(CESubsystem) /MACHINE:THUMB

!ENDIF 

# Begin Target

# Name "GPIO_VIEWER - Win32 (WCE ARMV4I) Release"
# Name "GPIO_VIEWER - Win32 (WCE ARMV4I) Debug"
# Begin Group "Source Files"

# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
# Begin Source File

SOURCE=.\GPIO_VIEWER.cpp
# End Source File
# Begin Source File

SOURCE=.\GPIO_VIEWER.rc
# End Source File
# Begin Source File

SOURCE=.\GPIO_VIEWERDlg.cpp
# End Source File
# Begin Source File

SOURCE=.\StdAfx.cpp
# ADD CPP /Yc"stdafx.h"
# End Source File
# End Group
# Begin Group "Header Files"

# PROP Default_Filter "h;hpp;hxx;hm;inl"
# Begin Source File

SOURCE=.\GPIO_VIEWER.h
# End Source File
# Begin Source File

SOURCE=.\GPIO_VIEWERDlg.h
# End Source File
# Begin Source File

SOURCE=.\newres.h
# End Source File
# Begin Source File

SOURCE=.\Resource.h
# End Source File
# Begin Source File

SOURCE=.\StdAfx.h
# End Source File
# End Group
# Begin Group "Resource Files"

# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
# Begin Source File

SOURCE=.\res\GPIO_VIEWER.ico
# End Source File
# Begin Source File

SOURCE=.\res\GPIO_VIEWER.rc2
# PROP Exclude_From_Scan -1
# PROP BASE Exclude_From_Build 1
# PROP Exclude_From_Build 1
# End Source File
# End Group
# Begin Source File

SOURCE=.\ReadMe.txt
# End Source File
# End Target
# End Project