?? lpc2106.h
字號:
/****************************************Copyright (c)**************************************************
********************************************************************************************************/
/* External Interrupts */
/* 外部中斷控制寄存器 */
#define EXTINT (*((volatile unsigned char *) 0xE01FC140)) //外部中斷標志寄存器
#define EXTWAKE (*((volatile unsigned char *) 0xE01FC144)) //外部中斷喚醒,是否從處理器掉電中喚醒
/* SMemory mapping control. */
/* 內存remap控制寄存器 */
#define MEMMAP (*((volatile unsigned long *) 0xE01FC040)) //選擇讀取向量的不同地址
/* Phase Locked Loop (PLL) */
/* PLL控制寄存器 */
#define PLLCON (*((volatile unsigned char *) 0xE01FC080)) //PLL控制位保持寄存器
#define PLLCFG (*((volatile unsigned char *) 0xE01FC084)) //PLL配置值保持寄存器
#define PLLSTAT (*((volatile unsigned short*) 0xE01FC088)) //控制和配置信息讀回寄存器
#define PLLFEED (*((volatile unsigned char *) 0xE01FC08C)) //使能控制和配置
/* Power Control */
/* 功率控制寄存器 */
#define PCON (*((volatile unsigned char *) 0xE01FC0C0)) //功率控制(空閑模式或掉電模式)
#define PCONP (*((volatile unsigned long *) 0xE01FC0C4)) //外設功率控制
/* VPB Divider */
/* VLSI外設總線（VPB）分頻寄存器 */
#define VPBDIV (*((volatile unsigned char *) 0xE01FC100)) //VPB時鐘設置
/* Memory Accelerator Module (MAM) */
/* 存儲器加速模塊 */
#define MAMCR (*((volatile unsigned char *) 0xE01FC000)) //控制
#define MAMTIM (*((volatile unsigned char *) 0xE01FC004)) //定時控制
/* Vectored Interrupt Controller (VIC) */
/* 向量中斷控制器(VIC)的特殊寄存器 */
#define VICIRQStatus (*((volatile unsigned long *) 0xFFFFF000)) //IRQ狀態
#define VICFIQStatus (*((volatile unsigned long *) 0xFFFFF004)) //FIQ狀態
#define VICRawIntr (*((volatile unsigned long *) 0xFFFFF008)) //所有中斷的狀態
#define VICIntSelect (*((volatile unsigned long *) 0xFFFFF00C)) //中斷選擇
#define VICIntEnable (*((volatile unsigned long *) 0xFFFFF010)) //中斷使能
#define VICIntEnClr (*((volatile unsigned long *) 0xFFFFF014)) //中斷使能清零
#define VICSoftInt (*((volatile unsigned long *) 0xFFFFF018)) //軟件中斷
#define VICSoftIntClear (*((volatile unsigned long *) 0xFFFFF01C)) //軟件中斷清零
#define VICProtection (*((volatile unsigned long *) 0xFFFFF020)) //保護使能
#define VICVectAddr (*((volatile unsigned long *) 0xFFFFF030)) //向量地址
#define VICDefVectAddr (*((volatile unsigned long *) 0xFFFFF034)) //默認地址
#define VICVectAddr0 (*((volatile unsigned long *) 0xFFFFF100)) //向量地址
#define VICVectAddr1 (*((volatile unsigned long *) 0xFFFFF104))
#define VICVectAddr2 (*((volatile unsigned long *) 0xFFFFF108))
#define VICVectAddr3 (*((volatile unsigned long *) 0xFFFFF10C))
#define VICVectAddr4 (*((volatile unsigned long *) 0xFFFFF110))
#define VICVectAddr5 (*((volatile unsigned long *) 0xFFFFF114))
#define VICVectAddr6 (*((volatile unsigned long *) 0xFFFFF118))
#define VICVectAddr7 (*((volatile unsigned long *) 0xFFFFF11C))
#define VICVectAddr8 (*((volatile unsigned long *) 0xFFFFF120))
#define VICVectAddr9 (*((volatile unsigned long *) 0xFFFFF124))
#define VICVectAddr10 (*((volatile unsigned long *) 0xFFFFF128))
#define VICVectAddr11 (*((volatile unsigned long *) 0xFFFFF12C))
#define VICVectAddr12 (*((volatile unsigned long *) 0xFFFFF130))
#define VICVectAddr13 (*((volatile unsigned long *) 0xFFFFF134))
#define VICVectAddr14 (*((volatile unsigned long *) 0xFFFFF138))
#define VICVectAddr15 (*((volatile unsigned long *) 0xFFFFF13C))
#define VICVectCntl0 (*((volatile unsigned long *) 0xFFFFF200)) //向量控制
#define VICVectCntl1 (*((volatile unsigned long *) 0xFFFFF204))
#define VICVectCntl2 (*((volatile unsigned long *) 0xFFFFF208))
#define VICVectCntl3 (*((volatile unsigned long *) 0xFFFFF20C))
#define VICVectCntl4 (*((volatile unsigned long *) 0xFFFFF210))
#define VICVectCntl5 (*((volatile unsigned long *) 0xFFFFF214))
#define VICVectCntl6 (*((volatile unsigned long *) 0xFFFFF218))
#define VICVectCntl7 (*((volatile unsigned long *) 0xFFFFF21C))
#define VICVectCntl8 (*((volatile unsigned long *) 0xFFFFF220))
#define VICVectCntl9 (*((volatile unsigned long *) 0xFFFFF224))
#define VICVectCntl10 (*((volatile unsigned long *) 0xFFFFF228))
#define VICVectCntl11 (*((volatile unsigned long *) 0xFFFFF22C))
#define VICVectCntl12 (*((volatile unsigned long *) 0xFFFFF230))
#define VICVectCntl13 (*((volatile unsigned long *) 0xFFFFF234))
#define VICVectCntl14 (*((volatile unsigned long *) 0xFFFFF238))
#define VICVectCntl15 (*((volatile unsigned long *) 0xFFFFF23C))
/* General Purpose Input/Output (GPIO) */
/* 通用并行IO口的特殊寄存器 */
#define IOPIN (*((volatile unsigned long *) 0xE0028000))
#define IOSET (*((volatile unsigned long *) 0xE0028004))
#define IODIR (*((volatile unsigned long *) 0xE0028008))
#define IOCLR (*((volatile unsigned long *) 0xE002800C))
/* Pin Connect Block */
/* 管腳連接模塊控制寄存器 */
#define PINSEL0 (*((volatile unsigned long *) 0xE002C000))
#define PINSEL1 (*((volatile unsigned long *) 0xE002C004))
/* Universal Asynchronous Receiver Transmitter 0 (UART0) */
/* 通用異步串行口0(UART0)的特殊寄存器 */
#define U0RBR (*((volatile unsigned char *) 0xE000C000))
#define U0THR (*((volatile unsigned char *) 0xE000C000))
#define U0IER (*((volatile unsigned char *) 0xE000C004))
#define U0IIR (*((volatile unsigned char *) 0xE000C008))
#define U0FCR (*((volatile unsigned char *) 0xE000C008))
#define U0LCR (*((volatile unsigned char *) 0xE000C00C))
#define U0LSR (*((volatile unsigned char *) 0xE000C014))
#define U0SCR (*((volatile unsigned char *) 0xE000C01C))
#define U0DLL (*((volatile unsigned char *) 0xE000C000))
#define U0DLM (*((volatile unsigned char *) 0xE000C004))
/* Universal Asynchronous Receiver Transmitter 1 (UART1) */
/* 通用異步串行口1(UART1)的特殊寄存器 */
#define U1RBR (*((volatile unsigned char *) 0xE0010000))
#define U1THR (*((volatile unsigned char *) 0xE0010000))
#define U1IER (*((volatile unsigned char *) 0xE0010004))
#define U1IIR (*((volatile unsigned char *) 0xE0010008))
#define U1FCR (*((volatile unsigned char *) 0xE0010008))
#define U1LCR (*((volatile unsigned char *) 0xE001000C))
#define U1MCR (*((volatile unsigned char *) 0xE0010010))
#define U1LSR (*((volatile unsigned char *) 0xE0010014))
#define U1MSR (*((volatile unsigned char *) 0xE0010018))
#define U1SCR (*((volatile unsigned char *) 0xE001001C))
#define U1DLL (*((volatile unsigned char *) 0xE0010000))
#define U1DLM (*((volatile unsigned char *) 0xE0010004))
/* I2C (8/16 bit data bus) */
/* 芯片間總線（I2C）的特殊寄存器 */
#define I2CONSET (*((volatile unsigned long *) 0xE001C000))
#define I2STAT (*((volatile unsigned long *) 0xE001C004))
#define I2DAT (*((volatile unsigned long *) 0xE001C008))
#define I2ADR (*((volatile unsigned long *) 0xE001C00C))
#define I2SCLH (*((volatile unsigned long *) 0xE001C010))
#define I2SCLL (*((volatile unsigned long *) 0xE001C014))
#define I2CONCLR (*((volatile unsigned long *) 0xE001C018))
/* SPI (Serial Peripheral Interface) */
/* SPI總線接口的特殊寄存器 */
#define SPI_SPCR (*((volatile unsigned char *) 0xE0020000))
#define SPI_SPSR (*((volatile unsigned char *) 0xE0020004))
#define SPI_SPDR (*((volatile unsigned char *) 0xE0020008))
#define SPI_SPCCR (*((volatile unsigned char *) 0xE002000C))
#define SPI_SPINT (*((volatile unsigned char *) 0xE002001C))
/* Timer 0 */
/* 定時器0的特殊寄存器 */
#define T0IR (*((volatile unsigned long *) 0xE0004000))
#define T0TCR (*((volatile unsigned long *) 0xE0004004))
#define T0TC (*((volatile unsigned long *) 0xE0004008))
#define T0PR (*((volatile unsigned long *) 0xE000400C))
#define T0PC (*((volatile unsigned long *) 0xE0004010))
#define T0MCR (*((volatile unsigned long *) 0xE0004014))
#define T0MR0 (*((volatile unsigned long *) 0xE0004018))
#define T0MR1 (*((volatile unsigned long *) 0xE000401C))
#define T0MR2 (*((volatile unsigned long *) 0xE0004020))
#define T0MR3 (*((volatile unsigned long *) 0xE0004024))
#define T0CCR (*((volatile unsigned long *) 0xE0004028))
#define T0CR0 (*((volatile unsigned long *) 0xE000402C))
#define T0CR1 (*((volatile unsigned long *) 0xE0004030))
#define T0CR2 (*((volatile unsigned long *) 0xE0004034))
#define T0CR3 (*((volatile unsigned long *) 0xE0004038))
#define T0EMR (*((volatile unsigned long *) 0xE000403C))
/* Timer 1 */
/* 定時器1的特殊寄存器 */
#define T1IR (*((volatile unsigned long *) 0xE0008000))
#define T1TCR (*((volatile unsigned long *) 0xE0008004))
#define T1TC (*((volatile unsigned long *) 0xE0008008))
#define T1PR (*((volatile unsigned long *) 0xE000800C))
#define T1PC (*((volatile unsigned long *) 0xE0008010))
#define T1MCR (*((volatile unsigned long *) 0xE0008014))
#define T1MR0 (*((volatile unsigned long *) 0xE0008018))
#define T1MR1 (*((volatile unsigned long *) 0xE000801C))
#define T1MR2 (*((volatile unsigned long *) 0xE0008020))
#define T1MR3 (*((volatile unsigned long *) 0xE0008024))
#define T1CCR (*((volatile unsigned long *) 0xE0008028))
#define T1CR0 (*((volatile unsigned long *) 0xE000802C))
#define T1CR1 (*((volatile unsigned long *) 0xE0008030))
#define T1CR2 (*((volatile unsigned long *) 0xE0008034))
#define T1CR3 (*((volatile unsigned long *) 0xE0008038))
#define T1EMR (*((volatile unsigned long *) 0xE000803C))
/* Pulse Width Modulator (PWM) */
/* 脈寬調制器的特殊寄存器 */
#define PWMIR (*((volatile unsigned long *) 0xE0014000))
#define PWMTCR (*((volatile unsigned long *) 0xE0014004))
#define PWMTC (*((volatile unsigned long *) 0xE0014008))
#define PWMPR (*((volatile unsigned long *) 0xE001400C))
#define PWMPC (*((volatile unsigned long *) 0xE0014010))
#define PWMMCR (*((volatile unsigned long *) 0xE0014014))
#define PWMMR0 (*((volatile unsigned long *) 0xE0014018))
#define PWMMR1 (*((volatile unsigned long *) 0xE001401C))
#define PWMMR2 (*((volatile unsigned long *) 0xE0014020))
#define PWMMR3 (*((volatile unsigned long *) 0xE0014024))
#define PWMMR4 (*((volatile unsigned long *) 0xE0014040))
#define PWMMR5 (*((volatile unsigned long *) 0xE0014044))
#define PWMMR6 (*((volatile unsigned long *) 0xE0014048))
#define PWMPCR (*((volatile unsigned long *) 0xE001404C))
#define PWMLER (*((volatile unsigned long *) 0xE0014050))
/* Real Time Clock */
/* 實時時鐘的特殊寄存器 */
#define ILR (*((volatile unsigned char *) 0xE0024000))
#define CTC (*((volatile unsigned short*) 0xE0024004))
#define CCR (*((volatile unsigned char *) 0xE0024008))
#define CIIR (*((volatile unsigned char *) 0xE002400C))
#define AMR (*((volatile unsigned char *) 0xE0024010))
#define CTIME0 (*((volatile unsigned long *) 0xE0024014))
#define CTIME1 (*((volatile unsigned long *) 0xE0024018))
#define CTIME2 (*((volatile unsigned long *) 0xE002401C))
#define SEC (*((volatile unsigned char *) 0xE0024020))
#define MIN (*((volatile unsigned char *) 0xE0024024))
#define HOUR (*((volatile unsigned char *) 0xE0024028))
#define DOM (*((volatile unsigned char *) 0xE002402C))
#define DOW (*((volatile unsigned char *) 0xE0024030))
#define DOY (*((volatile unsigned short*) 0xE0024034))
#define MONTH (*((volatile unsigned char *) 0xE0024038))
#define YEAR (*((volatile unsigned short*) 0xE002403C))
#define ALSEC (*((volatile unsigned char *) 0xE0024060))
#define ALMIN (*((volatile unsigned char *) 0xE0024064))
#define ALHOUR (*((volatile unsigned char *) 0xE0024068))
#define ALDOM (*((volatile unsigned char *) 0xE002406C))
#define ALDOW (*((volatile unsigned char *) 0xE0024070))
#define ALDOY (*((volatile unsigned short*) 0xE0024074))
#define ALMON (*((volatile unsigned char *) 0xE0024078))
#define ALYEAR (*((volatile unsigned short*) 0xE002407C))
#define PREINT (*((volatile unsigned short*) 0xE0024080))
#define PREFRAC (*((volatile unsigned short*) 0xE0024084))
/* Watchdog */
/* 看門狗的特殊寄存器 */
#define WDMOD (*((volatile unsigned char *) 0xE0000000))
#define WDTC (*((volatile unsigned long *) 0xE0000004))
#define WDFEED (*((volatile unsigned char *) 0xE0000008))
#define WDTV (*((volatile unsigned long *) 0xE000000C))
/* Define firmware Functions */
/* 定義固件函數 */
#define rm_init_entry() ((void (*)())(0x7fffff91))()
#define rm_undef_handler() ((void (*)())(0x7fffffa0))()
#define rm_prefetchabort_handler() ((void (*)())(0x7fffffb0))()
#define rm_dataabort_handler() ((void (*)())(0x7fffffc0))()
#define rm_irqhandler() ((void (*)())(0x7fffffd0))()
#define rm_irqhandler2() ((void (*)())(0x7fffffe0))()
#define iap_entry(a, b) ((void (*)())(0x7ffffff1))(a, b)
/*********************************************************************************************************
** End Of File
********************************************************************************************************/
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -