?? cfgmgr32.h
字號:
//
#define CM_ADD_RANGE_ADDIFCONFLICT (0x00000000) // merg with conflicting range
#define CM_ADD_RANGE_DONOTADDIFCONFLICT (0x00000001) // error if range conflicts
#define CM_ADD_RANGE_BITS (0x00000001)
//
// Logical Config Flags (specified in call to CM_Get_First_Log_Conf
//
#define BASIC_LOG_CONF 0x00000000 // Specifies the req list.
#define FILTERED_LOG_CONF 0x00000001 // Specifies the filtered req list.
#define ALLOC_LOG_CONF 0x00000002 // Specifies the Alloc Element.
#define BOOT_LOG_CONF 0x00000003 // Specifies the RM Alloc Element.
#define FORCED_LOG_CONF 0x00000004 // Specifies the Forced Log Conf
#define OVERRIDE_LOG_CONF 0x00000005 // Specifies the Override req list.
#define NUM_LOG_CONF 0x00000006 // Number of Log Conf type
#define LOG_CONF_BITS 0x00000007 // The bits of the log conf type.
#define PRIORITY_EQUAL_FIRST (0x00000008) // Same priority, new one first
#define PRIORITY_EQUAL_LAST (0x00000000) // Same priority, new one last
#define PRIORITY_BIT (0x00000008)
//
// Registry disposition values
// (specified in call to CM_Open_DevNode_Key and CM_Open_Class_Key)
//
#define RegDisposition_OpenAlways (0x00000000) // open if exists else create
#define RegDisposition_OpenExisting (0x00000001) // open key only if exists
#define RegDisposition_Bits (0x00000001)
//
// ulFlags values for CM API routines
//
//
// Flags for CM_Add_ID
//
#define CM_ADD_ID_HARDWARE (0x00000000)
#define CM_ADD_ID_COMPATIBLE (0x00000001)
#define CM_ADD_ID_BITS (0x00000001)
//
// Device Node creation flags
//
#define CM_CREATE_DEVNODE_NORMAL (0x00000000) // install later
#define CM_CREATE_DEVNODE_NO_WAIT_INSTALL (0x00000001) // NOT SUPPORTED ON NT
#define CM_CREATE_DEVNODE_PHANTOM (0x00000002)
#define CM_CREATE_DEVNODE_GENERATE_ID (0x00000004)
#define CM_CREATE_DEVNODE_DO_NOT_INSTALL (0x00000008)
#define CM_CREATE_DEVNODE_BITS (0x0000000F)
#define CM_CREATE_DEVINST_NORMAL CM_CREATE_DEVNODE_NORMAL
#define CM_CREATE_DEVINST_NO_WAIT_INSTALL CM_CREATE_DEVNODE_NO_WAIT_INSTALL
#define CM_CREATE_DEVINST_PHANTOM CM_CREATE_DEVNODE_PHANTOM
#define CM_CREATE_DEVINST_GENERATE_ID CM_CREATE_DEVNODE_GENERATE_ID
#define CM_CREATE_DEVINST_DO_NOT_INSTALL CM_CREATE_DEVNODE_DO_NOT_INSTALL
#define CM_CREATE_DEVINST_BITS CM_CREATE_DEVNODE_BITS
//
// Flags for CM_Delete_Class_Key
//
#define CM_DELETE_CLASS_ONLY (0x00000000)
#define CM_DELETE_CLASS_SUBKEYS (0x00000001)
#define CM_DELETE_CLASS_BITS (0x00000001)
//
// Detection reason flags (specified in call to CM_Run_Detection)
//
#define CM_DETECT_NEW_PROFILE (0x00000001) // detection for new hw profile
#define CM_DETECT_CRASHED (0x00000002) // Previous detection crashed
#define CM_DETECT_HWPROF_FIRST_BOOT (0x00000004)
#define CM_DETECT_RUN (0x80000000)
#define CM_DETECT_BITS (0x80000007)
#define CM_DISABLE_POLITE (0x00000000) // Ask the driver
#define CM_DISABLE_ABSOLUTE (0x00000001) // Don't ask the driver
#define CM_DISABLE_HARDWARE (0x00000002) // Don't ask the driver, and won't be restarteable
#define CM_DISABLE_UI_NOT_OK (0x00000004) // Don't popup any veto API
#define CM_DISABLE_BITS (0x00000007) // The bits for the disable function
//
// Flags for CM_Get_Device_ID_List, CM_Get_Device_ID_List_Size
//
#define CM_GETIDLIST_FILTER_NONE (0x00000000)
#define CM_GETIDLIST_FILTER_ENUMERATOR (0x00000001)
#define CM_GETIDLIST_FILTER_SERVICE (0x00000002)
#define CM_GETIDLIST_FILTER_EJECTRELATIONS (0x00000004)
#define CM_GETIDLIST_FILTER_REMOVALRELATIONS (0x00000008)
#define CM_GETIDLIST_FILTER_POWERRELATIONS (0x00000010)
#define CM_GETIDLIST_FILTER_BUSRELATIONS (0x00000020)
#define CM_GETIDLIST_DONOTGENERATE (0x10000040)
#define CM_GETIDLIST_FILTER_BITS (0x1000007F)
//
// Flags for CM_Get_Device_Interface_List, CM_Get_Device_Interface_List_Size
//
#define CM_GET_DEVICE_INTERFACE_LIST_PRESENT (0x00000000) // only currently 'live' device interfaces
#define CM_GET_DEVICE_INTERFACE_LIST_ALL_DEVICES (0x00000001) // all registered device interfaces, live or not
#define CM_GET_DEVICE_INTERFACE_LIST_BITS (0x00000001)
//
// Registry properties (specified in call to CM_Get_DevInst_Registry_Property or CM_Get_Class_Registry_Property,
// some are allowed in calls to CM_Set_DevInst_Registry_Property and CM_Set_Class_Registry_Property)
// CM_DRP_xxxx values should be used for CM_Get_DevInst_Registry_Property / CM_Set_DevInst_Registry_Property
// CM_CRP_xxxx values should be used for CM_Get_Class_Registry_Property / CM_Set_Class_Registry_Property
// DRP/CRP values that overlap must have a 1:1 correspondence with each other
//
#define CM_DRP_DEVICEDESC (0x00000001) // DeviceDesc REG_SZ property (RW)
#define CM_DRP_HARDWAREID (0x00000002) // HardwareID REG_MULTI_SZ property (RW)
#define CM_DRP_COMPATIBLEIDS (0x00000003) // CompatibleIDs REG_MULTI_SZ property (RW)
#define CM_DRP_UNUSED0 (0x00000004) // unused
#define CM_DRP_SERVICE (0x00000005) // Service REG_SZ property (RW)
#define CM_DRP_UNUSED1 (0x00000006) // unused
#define CM_DRP_UNUSED2 (0x00000007) // unused
#define CM_DRP_CLASS (0x00000008) // Class REG_SZ property (RW)
#define CM_DRP_CLASSGUID (0x00000009) // ClassGUID REG_SZ property (RW)
#define CM_DRP_DRIVER (0x0000000A) // Driver REG_SZ property (RW)
#define CM_DRP_CONFIGFLAGS (0x0000000B) // ConfigFlags REG_DWORD property (RW)
#define CM_DRP_MFG (0x0000000C) // Mfg REG_SZ property (RW)
#define CM_DRP_FRIENDLYNAME (0x0000000D) // FriendlyName REG_SZ property (RW)
#define CM_DRP_LOCATION_INFORMATION (0x0000000E) // LocationInformation REG_SZ property (RW)
#define CM_DRP_PHYSICAL_DEVICE_OBJECT_NAME (0x0000000F) // PhysicalDeviceObjectName REG_SZ property (R)
#define CM_DRP_CAPABILITIES (0x00000010) // Capabilities REG_DWORD property (R)
#define CM_DRP_UI_NUMBER (0x00000011) // UiNumber REG_DWORD property (R)
#define CM_DRP_UPPERFILTERS (0x00000012) // UpperFilters REG_MULTI_SZ property (RW)
#define CM_DRP_LOWERFILTERS (0x00000013) // LowerFilters REG_MULTI_SZ property (RW)
#define CM_DRP_BUSTYPEGUID (0x00000014) // Bus Type Guid, GUID, (R)
#define CM_DRP_LEGACYBUSTYPE (0x00000015) // Legacy bus type, INTERFACE_TYPE, (R)
#define CM_DRP_BUSNUMBER (0x00000016) // Bus Number, DWORD, (R)
#define CM_DRP_ENUMERATOR_NAME (0x00000017) // Enumerator Name REG_SZ property (R)
#define CM_DRP_SECURITY (0x00000018) // Security - Device override (RW)
#define CM_CRP_SECURITY CM_DRP_SECURITY // Class default security (RW)
#define CM_DRP_SECURITY_SDS (0x00000019) // Security - Device override (RW)
#define CM_CRP_SECURITY_SDS CM_DRP_SECURITY_SDS // Class default security (RW)
#define CM_DRP_DEVTYPE (0x0000001A) // Device Type - Device override (RW)
#define CM_CRP_DEVTYPE CM_DRP_DEVTYPE // Class default Device-type (RW)
#define CM_DRP_EXCLUSIVE (0x0000001B) // Exclusivity - Device override (RW)
#define CM_CRP_EXCLUSIVE CM_DRP_EXCLUSIVE // Class default (RW)
#define CM_DRP_CHARACTERISTICS (0x0000001C) // Characteristics - Device Override (RW)
#define CM_CRP_CHARACTERISTICS CM_DRP_CHARACTERISTICS // Class default (RW)
#define CM_DRP_ADDRESS (0x0000001D) // Device Address (R)
#define CM_DRP_UI_NUMBER_DESC_FORMAT (0x0000001E) // UINumberDescFormat REG_SZ property (RW)
#define CM_DRP_DEVICE_POWER_DATA (0x0000001F) // CM_POWER_DATA REG_BINARY property (R)
#define CM_DRP_REMOVAL_POLICY (0x00000020) // CM_DEVICE_REMOVAL_POLICY REG_DWORD (R)
#define CM_DRP_REMOVAL_POLICY_HW_DEFAULT (0x00000021) // CM_DRP_REMOVAL_POLICY_HW_DEFAULT REG_DWORD (R)
#define CM_DRP_REMOVAL_POLICY_OVERRIDE (0x00000022) // CM_DRP_REMOVAL_POLICY_OVERRIDE REG_DWORD (RW)
#define CM_DRP_INSTALL_STATE (0x00000023) // CM_DRP_INSTALL_STATE REG_DWORD (R)
#define CM_DRP_LOCATION_PATHS (0x00000024) // CM_DRP_LOCATION_PATHS REG_MULTI_SZ (R)
#define CM_DRP_MIN (0x00000001) // First device register
#define CM_CRP_MIN CM_DRP_MIN // First class register
#define CM_DRP_MAX (0x00000024) // Last device register
#define CM_CRP_MAX CM_DRP_MAX // Last class register
//
// Capabilities bits (the capability value is returned from calling
// CM_Get_DevInst_Registry_Property with CM_DRP_CAPABILITIES property)
//
#define CM_DEVCAP_LOCKSUPPORTED (0x00000001)
#define CM_DEVCAP_EJECTSUPPORTED (0x00000002)
#define CM_DEVCAP_REMOVABLE (0x00000004)
#define CM_DEVCAP_DOCKDEVICE (0x00000008)
#define CM_DEVCAP_UNIQUEID (0x00000010)
#define CM_DEVCAP_SILENTINSTALL (0x00000020)
#define CM_DEVCAP_RAWDEVICEOK (0x00000040)
#define CM_DEVCAP_SURPRISEREMOVALOK (0x00000080)
#define CM_DEVCAP_HARDWAREDISABLED (0x00000100)
#define CM_DEVCAP_NONDYNAMIC (0x00000200)
//
// Removal policies (retrievable via CM_Get_DevInst_Registry_Property with
// the CM_DRP_REMOVAL_POLICY, CM_DRP_REMOVAL_POLICY_OVERRIDE, or
// CM_DRP_REMOVAL_POLICY_HW_DEFAULT properties)
//
#define CM_REMOVAL_POLICY_EXPECT_NO_REMOVAL 1
#define CM_REMOVAL_POLICY_EXPECT_ORDERLY_REMOVAL 2
#define CM_REMOVAL_POLICY_EXPECT_SURPRISE_REMOVAL 3
//
// Device install states (retrievable via CM_Get_DevInst_Registry_Property with
// the CM_DRP_INSTALL_STATE properties)
//
#define CM_INSTALL_STATE_INSTALLED 0
#define CM_INSTALL_STATE_NEEDS_REINSTALL 1
#define CM_INSTALL_STATE_FAILED_INSTALL 2
#define CM_INSTALL_STATE_FINISH_INSTALL 3
//
// Flags for CM_Locate_DevNode
//
#define CM_LOCATE_DEVNODE_NORMAL 0x00000000
#define CM_LOCATE_DEVNODE_PHANTOM 0x00000001
#define CM_LOCATE_DEVNODE_CANCELREMOVE 0x00000002
#define CM_LOCATE_DEVNODE_NOVALIDATION 0x00000004
#define CM_LOCATE_DEVNODE_BITS 0x00000007
#define CM_LOCATE_DEVINST_NORMAL CM_LOCATE_DEVNODE_NORMAL
#define CM_LOCATE_DEVINST_PHANTOM CM_LOCATE_DEVNODE_PHANTOM
#define CM_LOCATE_DEVINST_CANCELREMOVE CM_LOCATE_DEVNODE_CANCELREMOVE
#define CM_LOCATE_DEVINST_NOVALIDATION CM_LOCATE_DEVNODE_NOVALIDATION
#define CM_LOCATE_DEVINST_BITS CM_LOCATE_DEVNODE_BITS
//
// Flags for CM_Open_Class_Key
//
#define CM_OPEN_CLASS_KEY_INSTALLER (0x00000000)
#define CM_OPEN_CLASS_KEY_INTERFACE (0x00000001)
#define CM_OPEN_CLASS_KEY_BITS (0x00000001)
//
// Flags for CM_Query_And_Remove_SubTree
//
#define CM_REMOVE_UI_OK 0x00000000
#define CM_REMOVE_UI_NOT_OK 0x00000001
#define CM_REMOVE_NO_RESTART 0x00000002
#define CM_REMOVE_BITS 0x00000003
//
// Backward compatibility--do not use
// (use above CM_REMOVE_* flags instead)
//
#define CM_QUERY_REMOVE_UI_OK (CM_REMOVE_UI_OK)
#define CM_QUERY_REMOVE_UI_NOT_OK (CM_REMOVE_UI_NOT_OK)
#define CM_QUERY_REMOVE_BITS (CM_QUERY_REMOVE_UI_OK|CM_QUERY_REMOVE_UI_NOT_OK)
//
// Flags for CM_Reenumerate_DevNode
//
#define CM_REENUMERATE_NORMAL 0x00000000
#define CM_REENUMERATE_SYNCHRONOUS 0x00000001
#define CM_REENUMERATE_RETRY_INSTALLATION 0x00000002
#define CM_REENUMERATE_ASYNCHRONOUS 0x00000004
#define CM_REENUMERATE_BITS 0x00000007
//
// Flags for CM_Register_Device_Driver
//
#define CM_REGISTER_DEVICE_DRIVER_STATIC (0x00000000)
#define CM_REGISTER_DEVICE_DRIVER_DISABLEABLE (0x00000001)
#define CM_REGISTER_DEVICE_DRIVER_REMOVABLE (0x00000002)
#define CM_REGISTER_DEVICE_DRIVER_BITS (0x00000003)
//
// Registry Branch Locations (for CM_Open_DevNode_Key)
//
#define CM_REGISTRY_HARDWARE (0x00000000)
#define CM_REGISTRY_SOFTWARE (0x00000001)
#define CM_REGISTRY_USER (0x00000100)
#define CM_REGISTRY_CONFIG (0x00000200)
#define CM_REGISTRY_BITS (0x00000301)
//
// Flags for CM_Set_DevNode_Problem
//
#define CM_SET_DEVNODE_PROBLEM_NORMAL (0x00000000) // only set problem if currently no problem
#define CM_SET_DEVNODE_PROBLEM_OVERRIDE (0x00000001) // override current problem with new problem
#define CM_SET_DEVNODE_PROBLEM_BITS (0x00000001)
#define CM_SET_DEVINST_PROBLEM_NORMAL CM_SET_DEVNODE_PROBLEM_NORMAL
#define CM_SET_DEVINST_PROBLEM_OVERRIDE CM_SET_DEVNODE_PROBLEM_OVERRIDE
#define CM_SET_DEVINST_PROBLEM_BITS CM_SET_DEVNODE_PROBLEM_BITS
//
// Flags for CM_Set_HW_Prof_Flags
//
#define CM_SET_HW_PROF_FLAGS_UI_NOT_OK (0x00000001) // Don't popup any veto UI
#define CM_SET_HW_PROF_FLAGS_BITS (0x00000001)
//
// Re-enable and configuration actions (specified in call to CM_Setup_DevInst)
//
#define CM_SETUP_DEVNODE_READY (0x00000000) // Reenable problem devinst
#define CM_SETUP_DEVINST_READY CM_SETUP_DEVNODE_READY
#define CM_SETUP_DOWNLOAD (0x00000001) // Get info about devinst
#define CM_SETUP_WRITE_LOG_CONFS (0x00000002)
#define CM_SETUP_PROP_CHANGE (0x00000003)
#define CM_SETUP_DEVNODE_RESET (0x00000004) // Reset problem devinst without starting
#define CM_SETUP_DEVINST_RESET CM_SETUP_DEVNODE_RESET
#define CM_SETUP_BITS (0x00000007)
//
// Flags for CM_Query_Arbitrator_Free_Data and
// CM_Query_Arbitrator_Free_Data_Size.
//
#define CM_QUERY_ARBITRATOR_RAW (0x00000000)
#define CM_QUERY_ARBITRATOR_TRANSLATED (0x00000001)
#define CM_QUERY_ARBITRATOR_BITS (0x00000001)
//
// Flags for CM_Get_DevNode_Custom_Property
//
#define CM_CUSTOMDEVPROP_MERGE_MULTISZ (0x00000001)
#define CM_CUSTOMDEVPROP_BITS (0x00000001)
//--------------------------------------------------------------
// Function prototypes
//--------------------------------------------------------------
CMAPI
CONFIGRET
WINAPI
CM_Add_Empty_Log_Conf(
OUT PLOG_CONF plcLogConf,
IN DEVINST dnDevInst,
IN PRIORITY Priority,
IN ULONG ulFlags
);
CMAPI
CONFIGRET
WINAPI
CM_Add_Empty_Log_Conf_Ex(
OUT PLOG_CONF plcLogConf,
IN DEVINST dnDevInst,
IN PRIORITY Priority,
IN ULONG ulFlags,
IN HMACHINE hMachine
);
CMAPI
CONFIGRET
WINAPI
CM_Add_IDA(
IN DEVINST dnDevInst,
IN PSTR pszID,
IN ULONG ulFlags
);
CMAPI
CONFIGRET
WINAPI
CM_Add_IDW(
IN DEVINST dnDevInst,
IN PWSTR pszID,
IN ULONG ulFlags
);
CMAPI
CONFIGRET
WINAPI
CM_Add_ID_ExA(
IN DEVINST dnDevInst,
IN PSTR pszID,
IN ULONG ulFlags,
IN HMACHINE hMachine
);
CMAPI
CONFIGRET
WINAPI
CM_Add_ID_ExW(
IN DEVINST dnDevInst,
IN PWSTR pszID,
IN ULONG ulFlags,
IN HMACHINE hMachine
);
#ifdef UNICODE
#define CM_Add_ID CM_Add_IDW
#define CM_Add_ID_Ex CM_Add_ID_ExW
#else
#define CM_Add_ID CM_Add_IDA
#define CM_Add_ID_Ex CM_Add_ID_ExA
#endif // UNICODE
CMAPI
CONFIGRET
WINAPI
CM_Add_Range(
IN DWORDLONG ullStartValue,
IN DWORDLONG ullEndValue,
IN RANGE_LIST rlh,
IN ULONG ulFlags
);
CMAPI
CONFIGRET
WINAPI
CM_Add_Res_Des(
OUT PRES_DES prdResDes,
IN LOG_CONF lcLogConf,
IN RESOURCEID ResourceID,
IN PCVOID ResourceData,
IN ULONG ResourceLen,
IN ULONG ulFlags
);
CMAPI
CONFIGRET
WINAPI
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -