?? lcdjp.plg
字號:
<html>
<body>
<pre>
<h1>礦ision3 Build Log</h1>
<h2>Project:</h2>
C:\Documents and Settings\喬冬\桌面\5：20成功\lcdjp.uv2
Project File Date: 09/12/2005
<h2>Output:</h2>
Build target 'Target 1'
compiling aaa.c...
AAA.C(1115): warning C280: 'ADC_channel': unreferenced local variable
AAA.C(1116): warning C280: 'ADC_result': unreferenced local variable
linking...
Program Size: data=155.0 xdata=256 code=4448
creating hex file from "lcdjp"...
"lcdjp" - 0 Error(s), 2 Warning(s).
Build target 'Target 1'
compiling aaa.c...
AAA.C(1115): warning C280: 'ADC_channel': unreferenced local variable
AAA.C(1116): warning C280: 'ADC_result': unreferenced local variable
linking...
Program Size: data=156.0 xdata=256 code=4448
creating hex file from "lcdjp"...
"lcdjp" - 0 Error(s), 2 Warning(s).
Load "C:\\Documents and Settings\\喬冬\\桌面\\5：20成功\\lcdjp"
UTLADRM - Merge MCU Firmware Utility
PSDsoft Express Utility 8.03 Copyright (C) 1993-2004 STMicroelectronics, Inc.
All Rights Reserved
Updating Flash/FlashBoot code/data to 'jianpan.OBJ' file ...
Warning ADR002: No data file has been specified for FS0.
Address Translation complete.
Warning encountered - reference jianpan.ERR for warning.
Erasing Flash...
Erasing PLD/ACR...
Programming Flash Block 0 (FS0).
Programming Flash Boot Block 0 (CSBOOT0).
Programming PLD.
Programming ACR (2 bit).
Programming ACR (1 bit).
Programming USERCODE.
Verifying Flash Block 0 (FS0).
Verifying Flash Boot Block 0 (CSBOOT0).
Verifying PLD.
Verifying ACR (2 bit).
Verifying ACR (1 bit).
Verifying USERCODE.
Total Flash Programming time: 7.9 sec
Build target 'Target 1'
compiling aaa.c...
AAA.C(884): error C141: syntax error near 'printchar'
Target not created
Build target 'Target 1'
compiling aaa.c...
AAA.C(1116): warning C280: 'ADC_channel': unreferenced local variable
AAA.C(1117): warning C280: 'ADC_result': unreferenced local variable
linking...
Program Size: data=156.0 xdata=256 code=4448
creating hex file from "lcdjp"...
"lcdjp" - 0 Error(s), 2 Warning(s).
Load "C:\\Documents and Settings\\喬冬\\桌面\\5：20成功\\lcdjp"
UTLADRM - Merge MCU Firmware Utility
PSDsoft Express Utility 8.03 Copyright (C) 1993-2004 STMicroelectronics, Inc.
All Rights Reserved
Updating Flash/FlashBoot code/data to 'jianpan.OBJ' file ...
Warning ADR002: No data file has been specified for FS0.
Address Translation complete.
Warning encountered - reference jianpan.ERR for warning.
Erasing Flash...
Erasing PLD/ACR...
Programming Flash Block 0 (FS0).
Programming Flash Boot Block 0 (CSBOOT0).
Programming PLD.
Programming ACR (2 bit).
Programming ACR (1 bit).
Programming USERCODE.
Verifying Flash Block 0 (FS0).
Verifying Flash Boot Block 0 (CSBOOT0).
Verifying PLD.
Verifying ACR (2 bit).
Verifying ACR (1 bit).
Verifying USERCODE.
Total Flash Programming time: 7.9 sec
Build target 'Target 1'
compiling aaa.c...
AAA.C(1116): warning C280: 'ADC_channel': unreferenced local variable
AAA.C(1117): warning C280: 'ADC_result': unreferenced local variable
linking...
Program Size: data=156.0 xdata=256 code=4460
creating hex file from "lcdjp"...
"lcdjp" - 0 Error(s), 2 Warning(s).
Load "C:\\Documents and Settings\\喬冬\\桌面\\5：20成功\\lcdjp"
Load "C:\\Documents and Settings\\喬冬\\桌面\\5：20成功\\lcdjp"
Load "C:\\Documents and Settings\\喬冬\\桌面\\5：20成功\\lcdjp"
UTLADRM - Merge MCU Firmware Utility
PSDsoft Express Utility 8.03 Copyright (C) 1993-2004 STMicroelectronics, Inc.
All Rights Reserved
Updating Flash/FlashBoot code/data to 'jianpan.OBJ' file ...
Warning ADR002: No data file has been specified for FS0.
Address Translation complete.
Warning encountered - reference jianpan.ERR for warning.
Erasing Flash...
Erasing PLD/ACR...
Programming Flash Block 0 (FS0).
Programming Flash Boot Block 0 (CSBOOT0).
Programming PLD.
Programming ACR (2 bit).
Programming ACR (1 bit).
Programming USERCODE.
Verifying Flash Block 0 (FS0).
Verifying Flash Boot Block 0 (CSBOOT0).
Verifying PLD.
Verifying ACR (2 bit).
Verifying ACR (1 bit).
Verifying USERCODE.
Total Flash Programming time: 7.9 sec
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -