- 4 Kbytes of internal code and data storage\n
 - 1 Mbyte of addressability to external RAM/ROM/FLASH\n
#CODE 80C196KT#
ROM/EPROM\n
 - 32 Kbytes of internal code and data storage\n
 - 64 Kbytes of addressability to external RAM/ROM\n
#CODE 80C196NQ#
ROM/EPROM\n
 - 12 Kbytes of internal code and data storage\n
 - 1 Mbyte of addressability to external RAM/ROM\n
#CODE 80C196KR#
#CODE 80C196JR#
ROM/EPROM\n
 - 16 Kbytes of internal code and data storage\n
 - 64 Kbytes of addressability to external RAM/ROM\n
#CODE 80C196JT#
ROM/EPROM\n
 - 32 Kbytes of internal code and data storage\n
 - 64 Kbytes of addressability to external RAM/ROM\n
#CODE 80C196KQ#
#CODE 80C196JQ#
ROM/EPROM\n
 - 12 Kbytes of internal code and data storage\n
 - 64 Kbytes of addressability to external RAM/ROM\n
#SlvPrt 80C196NT#
#SlvPrt 80C196NQ#
#SlvPrt 80C196KT#
#SlvPrt 80C196KR#
#SlvPrt 80C196KQ#
#SlvPrt 80C196JQ#
#SlvPrt 80C196JR#
#SlvPrt 80C196JT#
Slave Port\n
 - Slave parallel interface port to other processors\n
 - Similar to the 8042-style host interface\n
 - Multiplexed or demultiplexed bus interfacing\n
 - Use with PTS for fast communications (< 5 us/byte)\n
#ICU 80C196NT#
#ICU 80C196NP#
#ICU 80C196NU#
#ICU 80C196NQ#
#ICU 80C196KT#
#ICU 80C196KR#
#ICU 80C196KQ#
#ICU 80C196JQ#
#ICU 80C196JR#
#ICU 80C196JT#
Interrupt Controller\n
 - Fast flexible interrupts\n
 - 37 priority interrupt sources\n
 - 31 dedicated interrupt vectors\n
#ICU 80C296SA#
Interrupt Controller\n
 - Fast flexible interrupts\n
 - 37 priority interrupt sources\n
 - 31 dedicated interrupt vectors\n
 - NEW PRIORITY SETTING FEATURE.........EDIT_ME!!!!!!..\n
#PTS 80C196NT#
#PTS 80C196NP#
#PTS 80C196NU#
#PTS 80C196NQ#
#PTS 80C196KT#
#PTS 80C196KR#
#PTS 80C196KQ#
#PTS 80C196JQ#
#PTS 80C196JR#
#PTS 80C196JT#
Peripheral Transaction Server\n
 - Reduces interrupt latency time\n
 - Fast processing of any direct interrupt source\n
 - Special modes for A/D scanning and PWM generation\n
#PM 80C196NT#
#PM 80C196NP#
#PM 80C196NQ#
#PM 80C196KT#
#PM 80C196KR#
#PM 80C196KQ#
#PM 80C196JR#
#PM 80C196JT#
#PM 80C196JQ#
#PM 80C196KB#
#PM 80C196KC#
#PM 80C196KD#
#PM 80C198#
#PM 80C194#
Power Management\n
   Idle and Powerdown modes\n
    - Data in register RAM is maintained\n
\n
   Idle mode operates at 30% of full power\n
    - Peripherals continue to operate\n
    - Resumes on any interrupt\n
\n
   Powerdown operates < 50 uAmps\n
    - Wake-up by external interrupt (EXTINT)\n
#PM 80C196NU#
Power Management\n
   Idle, Powerdown, and Standby modes\n
      - Data in register RAM is maintained\n
\n
   Idle mode operates at 40% of full power\n
      - Peripherals continue to operate\n
      - Resumes on any interrupt\n
\n
   Powerdown operates < 50 uAmps\n
      - Wake-up by external interrupt (EXTINT)\n
\n
   Standby mode operates at 10% of full power\n
      - Peripherals continue to operate\n
      - Resumes on any interrupt\n
\n
#PM 80C296SA#
Power Management\n
   Idle, Powerdown, and Standby modes\n
      - Data in register RAM is maintained\n
\n
   Idle mode operates at 40% of full power\n
      - Peripherals continue to operate\n
      - Resumes on any interrupt\n
\n
   Powerdown operates < 50 uAmps\n
      - Wake-up by external interrupt (EXTINT)\n
\n
   Standby mode operates at 10% of full power\n
      - Peripherals continue to operate\n
      - Resumes on any interrupt\n
\n
   MORE AND MORE NEW FEATURES        EDIT_ME!!!!!!..........\n
\n   
#PTS 80C196KC#
#PTS 80C196KD#
Peripheral Transaction Server\n
 - Reduces interrupt latency time\n
 - Fast processing of any interrupt vectored source\n
 - Special mode for A/D scanning\n
#Serial 80C196KB#
#Serial 80C196KC#
#Serial 80C196KD#
#Serial 80C198#
#Serial 80C194#
Serial Port\n
 - Full duplex support\n
 - One synchronous and three asynchronous modes\n
 - Independent 15-bit baud-rate generator\n
 - Framing and parity error detection\n
 - Interrupt on receptions and transmissions\n
#Clock 80C196KB#
Clock\n
 - 8XC196KB10 operates from 3.5 to 10 MHz\n
 - 8XC196KB12 operates from 3.5 to 12 MHz\n
 - 8XC196KB16 operates from 3.5 to 16 MHz\n
#Clock 80C196KC#
Clock\n
 - 8XC196KC operates from 8 to 20 MHz\n
#Clock 80C196KD#
Clock\n
 - 8XC196KD16 operates from 8 to 16 MHz\n
 - 8XC196KD20 operates from 8 to 20 MHz\n
 - CLKOUT disable feature\n
#Clock 80C198#
#Clock 80C194#
Clock\n
 - 8XC194 operates from 3.5 to 12 MHz\n
 - 8XC198 operates from 3.5 to 12 MHz\n
 - 8XC198 operates from 3.5 to 16 MHz\n
#Timer 80C196KC#
#Timer 80C196KD#
Flexible Timer Counters\n
 - Two 16-bit timers\n
 - Timer 1 clocked internally\n
 - Timer 2 clocked internally or externally\n
 - Timer 2 reset using compare or via pin transition\n
 - Timer 2 counts up or down\n
 - Timer 2 has an independent event capture register\n
#Timer 80C196KB#
#Timer 80C198#
#Timer 80C194#
Flexible Timer Counters\n
 - Two 16-bit timers\n
 - Timer 1 clocked internally\n
 - Timer 2 clocked externally\n
 - Timer 2 reset using compare or via pin transition\n
 - Timer 2 counts up or down\n
 - Timer 2 has an independent event capture register\n
#HSO 80C196KB#
#HSO 80C196KC#
#HSO 80C196KD#
#HSO 80C198#
#HSO 80C194#
High-speed Output Unit\n
 - Six flexible output lines\n
 - Eight different compare functions\n
 - PWM outputs\n
 - Events stored in Content Addressable Memory (CAM)\n
 - CAM lock and CAM clear commands\n
 - Configurable as software timers\n
 - Can start A/D conversions\n
 - Can reset Timer 2\n
#HSI 80C196KB#
#HSI 80C196KC#
#HSI 80C196KD#
#HSI 80C198#
#HSI 80C194#
High-speed Input Unit\n
 - Four programmable input lines\n
 - Record and capture external events\n
 - Stores seven events in FIFO\n
#AD 80C196KB#
Analog-to-Digital Converter\n
 - Eight channels, 10-bit resolution\n
 - Sample and hold\n
 - Fast or slow conversion times\n
 - Performs conversions in 19.5 us (fast mode)\n
 - Performs conversions in 29.8 us (slow mode)\n
#AD 80C196KC#
#AD 80C196KD#
Analog-to-Digital Converter\n
 - Eight channels, 8- or 10-bit resolution\n
 - Programmable sample and conversion times\n
 - Performs 8-bit conversions in 7 us\n
 - Performs 10-bit conversions in 10 us\n
#AD 80C198#
Analog-to-Digital Converter\n
 - Four channels, 10-bit resolution\n
 - Sample and hold 
 - Performs conversions in 23 us\n
#CPU 80C196KB#
#CPU 80C196KC#
#CPU 80C198#
Central Processing Unit\n
 - High-performance CPU\n
 - Supports three-operand instructions\n
 - Performs 16 x 16 multiply in 1.75 us @ 16 MHz\n
 - Performs 32 / 16 divide in 3.0 us @ 16 MHz\n
#CPU 80C194#
Central Processing Unit\n
 - High-performance CPU\n
 - Supports three-operand instructions\n
 - Performs 16 x 16 multiply in 2.3 us @ 12 MHz\n
 - Performs 32 / 16 divide in 4.0 us @ 12 MHz\n
#CPU 80C196KD#
Central Processing Unit\n
 - High-performance CPU\n
 - Supports three-operand instructions\n
 - Performs 16 x 16 multiply in 1.4 us @ 20 MHz\n
 - Performs 32 / 16 divide in 2.4 us @ 20 MHz\n
#WDT 80C196KB#
#WDT 80C196KC#
#WDT 80C196KD#
#WDT 80C198#
#WDT 80C194#
Watchdog Timer\n
 - 16-bit timer\n
 - Allows recovery from system upsets\n
 - Resets processor on overflow\n
 - Increases system reliability\n
#DATA 80C196KB#
#DATA 80C198#
#DATA 80C194#
RAM\n
 - 232 bytes of register RAM\n
 - Fast context switching\n
 - Register-to-register architecture\n
 - Flexible orthogonal structure\n
#DATA 80C196KC#
RAM\n
 - 488 bytes of register RAM\n
 - Fast context switching\n
 - Register-to-register architecture\n
 - Flexible orthogonal structure\n
#DATA 80C196KD#
RAM\n
 - 1000 bytes of register RAM\n
 - Fast context switching\n
 - Register-to-register architecture\n
 - Flexible orthogonal structure\n
#CODE 80C196KB#
ROM/EPROM\n
 - 8 Kbytes of internal code and data storage\n
 - 64 Kbytes of addressability to external RAM/ROM/FLASH\n
#CODE 80C196KC#
ROM/EPROM\n
 - 16 Kbytes of internal code and data storage\n
 - 64 Kbytes of addressability to external RAM/ROM\n
#CODE 80C196KD#
ROM/EPROM\n
 - 32 Kbytes of internal code and data storage\n
 - 64 Kbytes of addressability to external RAM/ROM\n
#CODE 80C198#
#CODE 80C194#
ROM\n
 - 8 Kbytes of internal code and data storage\n
 - 64 Kbytes of addressability to external RAM/ROM\n
#IO 80C196KB#
#IO 80C196KC#
#IO 80C196KD#
I/O Ports\n
   Up to 48 I/O pins\n
#IO 80C198#
#IO 80C194#
I/O Ports\n
   Up to 34 I/O pins\n
#BIU 80C196KB#
#BIU 80C196KC#
#BIU 80C196KD#
Bus Interface Unit\n
 - Flexible 8- or 16-bit bus\n
 - 64 Kbyte addressability (16-bit external address bus)\n
 - READY control for slower memories (0, 1, 2, 3 and infinite wait states)\n
 - On-the-fly 8- or 16-bit buswidth control\n
 - WR#/BHE or WRL#/WRH# for flexible write functions\n
 - HOLD/HLDA protocol\n
#BIU 80C198#
#BIU 80C194#
Bus Interface Unit\n
 - 8-bit bus\n
 - Programmable wait states\n
#ICU 80C196KB#
#ICU 80C196KC#
#ICU 80C196KD#
#ICU 80C198#
#ICU 80C194#
Interrupt Control Unit\n
 - Fast flexible interrupts\n
 - 28 sources\n
 - 16 vectors\n
 - 16 priorities\n
#PWM 80C196KB#
#PWM 80C198#
#PWM 80C194#
Pulse Width Modulator\n
 - 8-bit PWM generator\n
 - Use for motor control\n
 - D/A and other analog functions\n
#PWM 80C196KC#
#PWM 80C196KD#
#PWM 80C196NP#
Pulse Width Modulator\n
 - Three 8-bit PWM generators\n
 - Use for motor control\n
 - D/A and other analog functions\n
#PWM 80C196NU#
#PWM 80C296SA#
Pulse Width Modulator\n
 - Three 8-bit PWM generators\n
 - Use for motor control\n
 - D/A and other analog functions\n
 - Three frequency prescalers available\n
#CSU 80C196NP#
#CSU 80C196NU#
Chip-Select Unit\n
 - Glueless memory interface\n
 - 256 byte to 1 Mbyte granularity\n
 - Select bus width\n
 - Select de-muxed or muxed bus\n
 - 0 to 3 wait states\n
#CSU 80C296SA#
Chip-Select Unit\n
 - Glueless memory interface\n
 - 256 byte to 6 Mbyte granularity     EDIT_ME!!!!!!..... \n
 - Select bus width\n
 - Select de-muxed or muxed bus\n
 - 0 to 15 wait states                 EDIT_ME!!!!!!..... \n
 - Select deferred bus cycle\n