/*****************************************************************************
*  Copyright Statement:
*  --------------------
*  This software is protected by Copyright and the information contained
*  herein is confidential. The software may not be copied and the information
*  contained herein may not be used or disclosed except with the written
*  permission of MediaTek Inc. (C) 2005
*
*  BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
*  THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
*  RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
*  AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
*  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
*  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
*  NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
*  SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
*  SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
*  THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
*  NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
*  SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
*
*  BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
*  LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
*  AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
*  OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
*  MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
*
*  THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
*  WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
*  LAWS PRINCIPLES.  ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
*  RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
*  THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
*
*****************************************************************************/

/*****************************************************************************
 *
 * Filename:
 * ---------
 *    lcd_sw.h
 *
 * Project:
 * --------
 *   Maui_Software
 *
 * Description:
 * ------------
 *   This file is intends for LCD driver.
 *
 * Author:
 * -------
 * -------
 *
 *============================================================================
 *             HISTORY
 * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
 *------------------------------------------------------------------------------
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 *
 * removed!
 * removed!
 * removed!
 * removed!
 * removed!
 * removed!
 *
 *------------------------------------------------------------------------------
 * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
 *============================================================================
 ****************************************************************************/
#include "lcd_if.h"

#ifndef _LCD_SW_H
#define _LCD_SW_H

#if (defined(MT6217) || defined(MT6218B) || defined(MT6219) || defined(MT6225) || defined(MT6226) || defined(MT6226M) || defined(MT6227))
    #define LCD_CMD_DMA_MODE
    #define LCD_16BIT_MODE

    //kino modify#define LCD_8BIT_MODE

    #define LCD_DUMMYADDR   (0x90000000)

    #define LCD_HX8306A_CTRL_ADDR   LCD_PARALLEL0_A0_LOW_ADDR
    #define LCD_HX8306A_DATA_ADDR   LCD_PARALLEL0_A0_HIGH_ADDR
    #define MAIN_LCD_CMD_ADDR       LCD_HX8306A_CTRL_ADDR
    #define MAIN_LCD_DATA_ADDR      LCD_HX8306A_DATA_ADDR
    #ifdef LCD_16BIT_MODE
    	#define MAIN_LCD_OUTPUT_FORMAT  LCM_16BIT_16_BPP_RGB565_1
    #else
    	#define MAIN_LCD_OUTPUT_FORMAT  LCM_8BIT_16_BPP_RGB565_1
    #endif
#endif

/***********************S1D15G00********************************/
/*HIMAX, 262K Color LCD, Parallel Interface, Pxtel development board*/
#if (defined(MT6217) || defined(MT6218B) || defined(MT6219) || defined(MT6225) || defined(MT6226) || defined(MT6226M) || defined(MT6227))
	 #ifdef LCD_CMD_DMA_MODE

	    #define LCD_SEND_DMA_CMD(n) \
	    {\
	        while (LCD_IS_RUNNING) {};\
	        ENABLE_LCD_TRANSFER_COMPLETE_INT;\
	        DISABLE_ALL_LCD_LAYER_WINDOW;\
	        SET_LCD_ROI_CTRL_NUMBER_OF_CMD(n);\
	        ENABLE_LCD_ROI_CTRL_CMD_FIRST;\
	        SET_LCD_ROI_WINDOW_SIZE(0, 0);\
	        START_LCD_TRANSFER;\
	        while (LCD_IS_RUNNING);\
	    }

	    #ifdef LCD_16BIT_MODE
	        #define LCD_CtrlWrite_HX8306A(_data) \
	        {\
	            SET_LCD_CMD_PARAMETER(0, LCD_CMD, _data);\
	            LCD_SEND_DMA_CMD(1);\
	        }

	        #define LCD_DataWrite_HX8306A(_data) \
	        {\
	            SET_LCD_CMD_PARAMETER(0, LCD_DATA, _data);\
	            LCD_SEND_DMA_CMD(1);\
	        }

	#define  Init_data( index, instruction)\
		 {   \
		 *(volatile kal_uint16*)LCD_HX8306A_CTRL_ADDR = index;\
		LCD_delay_HX8306A();\
		 *(volatile kal_uint16 *)LCD_HX8306A_DATA_ADDR = instruction;\
		LCD_delay_HX8306A();\
		 }

	        #define LCD_delay_HX8306A()

	        #define LCD_CtrlWrite_HX8306A_ESD(_data)  \
	        {\
	            *(volatile kal_uint32 *) LCD_HX8306A_CTRL_ADDR = _data;\
	            LCD_delay_HX8306A();\
	        }

	        #define LCD_DataWrite_HX8306A_ESD(_data) \
	        {\
	            *(volatile kal_uint32 *) LCD_HX8306A_DATA_ADDR = _data;\
	            LCD_delay_HX8306A();\
	        }
	    #elif (defined(LCD_8BIT_MODE))
			#define myLCD_delay_HX8306A() \
			{\
				volatile kal_uint16 iI; \
				for (iI = 0; iI < 0x9; iI++);\
			}

	        #define LCD_CtrlWrite_HX8306A(_data) \
	        {\
	            SET_LCD_CMD_PARAMETER(0, LCD_CMD, (_data >> 8));\
	            LCD_SEND_DMA_CMD(1);\
	            SET_LCD_CMD_PARAMETER(0, LCD_CMD, (_data & 0x00FF));\
	            LCD_SEND_DMA_CMD(1);\
	        }

	        #define LCD_DataWrite_HX8306A(_data) \
	        {\
	            SET_LCD_CMD_PARAMETER(0, LCD_DATA, (_data >> 8));\
	            LCD_SEND_DMA_CMD(1);\
	            SET_LCD_CMD_PARAMETER(0, LCD_DATA, (_data & 0x00FF));\
	            LCD_SEND_DMA_CMD(1);\
	        }

	        #define LCD_delay_HX8306A()

	        #define LCD_CtrlWrite_HX8306A_ESD(_data) \
	        {\
	            *(volatile kal_uint8 *) LCD_HX8306A_CTRL_ADDR = (_data >> 8);\
	            *(volatile kal_uint8 *) LCD_HX8306A_CTRL_ADDR = (_data & 0x00FF);\
	            LCD_delay_HX8306A();\
	        }

	        #define LCD_DataWrite_HX8306A_ESD(_data)  \
	        {\
	            *(volatile kal_uint8 *) LCD_HX8306A_DATA_ADDR = (_data >> 8);\
	            *(volatile kal_uint8 *) LCD_HX8306A_DATA_ADDR = (_data & 0x00FF);\
	            LCD_delay_HX8306A();\
	        }

	    #endif  /*  LCD_16BIT_MODE  */
		
 #else   /* LCD_CMD_DMA_MODE */

	    #ifdef LCD_16BIT_MODE
	        #define LCD_delay_HX8306A()

	        #define LCD_CtrlWrite_HX8306A(_data) \
	        {\
	            *(volatile kal_uint32 *) LCD_HX8306A_CTRL_ADDR = ((_data & 0xFF00) << 2) | ((_data & 0xFF) << 1);\
	            LCD_delay_HX8306A();\
	        }

	        #define LCD_DataWrite_HX8306A(_data) \
	        {\
	            *(volatile kal_uint32 *) LCD_HX8306A_DATA_ADDR = ((_data & 0xFF00) << 2) | ((_data & 0xFF) << 1);\
	            LCD_delay_HX8306A();\
	        }
	    #elif (defined(LCD_8BIT_MODE))
			#define myLCD_delay_HX8306A() \
			{\
				volatile kal_uint16 iI; \
				for (iI = 0; iI < 0x20; iI++);\
			}

	        #define LCD_CtrlWrite_HX8306A(_data) \
	        {\
	            *(volatile kal_uint8 *) LCD_HX8306A_CTRL_ADDR = (_data >> 8);\
	            myLCD_delay_HX8306A(); \
	            *(volatile kal_uint8 *) LCD_HX8306A_CTRL_ADDR = (_data & 0x00FF);\
	            myLCD_delay_HX8306A(); \
	        }

	        #define LCD_DataWrite_HX8306A(_data) \
	        {\
	            *(volatile kal_uint8 *) LCD_HX8306A_DATA_ADDR = (_data >> 8);\
	            myLCD_delay_HX8306A(); \
	            *(volatile kal_uint8 *) LCD_HX8306A_DATA_ADDR = (_data & 0x00FF);\
	            myLCD_delay_HX8306A(); \
	        }
	    #endif  /*  LCD_16BIT_MODE  */
	    #endif  /* LCD_CMD_DMA_MODE */

    #define LCD_DataRead_HX8306A    (*(volatile kal_uint32 *)LCD_HX8306A_DATA_ADDR);
#endif

#endif   /*_LCD_SW_H*/