/******************** (C) COPYRIGHT 2003 STMicroelectronics ********************
* File Name          : flash.c
* Author             : MCD Application Team
* Date First Issued  : 07/28/2003
* Description        : This file provides all the Flash software functions
********************************************************************************
* History:
*  01/01/2004 : V1.2
*  14/07/2004 : V1.3
*******************************************************************************/

#include "flash.h"

inline void IntFlash_Wait(void)
{
  while(FLASHR->CR0 & 0x16);
}

/*******************************************************************************
* Function Name  : FLASH_Init
* Description    : Initialise the Flash
* Input          : None
* Return         : None
*******************************************************************************/
void FLASH_Init(void)
{
// Reset Flash Control Registers
  FLASHR->CR0 = 0x00000000;
  FLASHR->CR1 = 0x00000000;
// Reset Flash Data Registers
  FLASHR->DR0 = 0xFFFFFFFF;
  FLASHR->DR1 = 0xFFFFFFFF;
// Reset Flash Error Register
  FLASHR->ER  = 0x00000000;
}

/*******************************************************************************
* Function Name  : FLASH_WordWrite
* Description    : Writes a Word to the Flash
* Input 1        : Address of the Destination
* Input 2        : Word To program
* Return         : None
*******************************************************************************/
void FLASH_WordWrite(u32 XtargetAdd, u32 Xdata)
{
  IntFlash_Wait();
  // set the Word Programming bit 'WPG' in the CR0 Reg
  FLASHR->CR0 |= FLASH_WPG_Mask;
  // Load the destination address in AR
  FLASHR->AR   = XtargetAdd;
  // Load DATA to be programmed in DR0
  FLASHR->DR0  = Xdata;
  // Set the Write Mode Start bit 'WMS' in the CR0 Reg to Start Write Operation
  FLASHR->CR0 |= FLASH_WMS_Mask;
}

/*******************************************************************************
* Function Name  : FLASH_DWordWrite
* Description    : Writes Double Word to the Flash
* Input 1        : Address of the Destination
* Input 2        : Word 1 To program
* Input 3        : Word 2 To program
* Return         : None
*******************************************************************************/
void FLASH_DWordWrite(u32 XtargetAdd, u32 Xdata0, u32 Xdata1)
{
  IntFlash_Wait();
  // set the Double Word Programming bit 'DWPG' in the CR0 Reg
  FLASHR->CR0 |= FLASH_DWPG_Mask;
  // Load the destination address in AR
  FLASHR->AR   = XtargetAdd;
  // Load DATA0 in DR0 Reg
  FLASHR->DR0  = Xdata0;
  // Load DATA1 in DR1 Reg
  FLASHR->DR1  = Xdata1;
  // Set the Write Mode Start bit 'WMS' in the CR0 Reg to Start Write Operation
  FLASHR->CR0 |= FLASH_WMS_Mask;
}

/*******************************************************************************
* Function Name  : FLASH_WriteBlock
* Description    : Writes Data To the Flash
* Input 1        : Address of the Data source
* Input 2        : Address of the Destination
* Input 3        : Nbr of words to be stored
* Return         : None
*******************************************************************************/
void FLASH_BlockWrite(u32 XsourceAdd, u32 XtargetAdd, u32 XdataLength)
{
  u32 TmpAddrS, TmpAddrD;
  u32 NbrW, NbrDW;
  u32 TmpData0, TmpData1;
  // Get The Source Address
  TmpAddrS = XsourceAdd;
  // Get The Destination Address
  TmpAddrD = XtargetAdd;
  // Get Number of Double Words
  NbrDW    = XdataLength >> 1;
  // Get Number of single Words
  NbrW     = XdataLength & 0x00000001;
  // Programming Double Words
  while (NbrDW > 0)
  {
    // Get The First 32 bits
    TmpData0 = *(u32 *)TmpAddrS;
    // Increment The Source Address
    TmpAddrS += 4;
    // Get The Second 32 bits
    TmpData1 = *(u32 *)TmpAddrS;
    // Increment The Source Address
    TmpAddrS += 4;
    // Use The FLASH_DWordWrite function to program the 64 bits
    FLASH_DWordWrite(TmpAddrD, TmpData0, TmpData1);
    // Decrease number of Double word
    NbrDW--;
    // Increment The destination Address
    TmpAddrD += 8;
    // Waits for the data to be programmed
    FLASH_Delay();
  }

  if (NbrW > 0)
  {
    // Get The First 32 bits
    TmpData1 = *(u32 *)TmpAddrS;
    // Use The FLASH_WordWrite function to program the 32 bits
    FLASH_WordWrite(TmpAddrD, TmpData1);
    // Waits for the data to be programmed
    FLASH_Delay();
  }
  IntFlash_Wait();
}

/*******************************************************************************
* Function Name  : FLASH_EraseSector
* Description    : Erases a Flash sector
* Input 1        : Sectors to be Erased
* Return         : None
*******************************************************************************/
void FLASH_SectorErase(u32 Xsectors)
{
  IntFlash_Wait();

  // Set the Sector Erase flag 'SER' in the FCRO reg
  FLASHR->CR0 |= FLASH_SER_Mask;
  // Select the Sectors to be erased in the CR1 register
  FLASHR->CR1 |= Xsectors;
  // Set the Write Mode Start bit 'WMS' in the CR0 Reg to Start Erase Operation
  FLASHR->CR0 |= FLASH_WMS_Mask;
}

/*******************************************************************************
* Function Name  : FLASH_EraseModule
* Description    : Erases a flash module
* Input          : None
* Return         : None
*******************************************************************************/
void FLASH_ModuleErase(void)
{
  FLASH_BankErase(FLASH_BANK0);
  FLASH_BankErase(FLASH_BANK1);
  IntFlash_Wait();
}

/*******************************************************************************
* Function Name  : FLASH_Delay
* Description    : Add the delay required for the Flash Write & Erase operation
* Input 1        : None
* Return         : None
*******************************************************************************/
void FLASH_Delay(void)
{
  u8 Xdelay;
  for(Xdelay = 0; Xdelay < 0xFE; Xdelay ++);
}

/*******************************************************************************
* Function Name  : FLASH_Suspend
* Description    : Suspends the current program or erase operation
* Input 1        : None
* Return         : None
*******************************************************************************/
void FLASH_Suspend(void)
{
  // Set The suspend Bit 'SUSP' in the CR0 register
  FLASHR->CR0 |= FLASH_SUSP_Mask;
}

/*******************************************************************************
* Function Name  : FLASH_Resume
* Description    : Resume a Suspended program or erase operation
* Input 1        : None
* Return         : None
*******************************************************************************/
void FLASH_Resume(void)
{
  // Reset The suspend Bit 'SUSP' in the FRC0 register
  FLASHR->CR0 &= ~FLASH_SUSP_Mask;
  // Set write mode bit
  FLASHR->CR0  |= FLASH_WMS_Mask;
}

/*******************************************************************************
* Function Name  : FLASH_ReadWord
* Description    : Read a single word of the flash
* Input 1        : Source Address
* Return         : Word
*******************************************************************************/
u32 FLASH_WordRead(u32 SourceAdd)
{
  IntFlash_Wait();
  // Waits for the flash to be unlocked
  while((FLASH_FlagStatus(FLASH_LOCK))== SET);
  // Reads the data from the specified Address
  return *(u32 *)(SourceAdd + 0x40000000);
}

/*******************************************************************************
* Function Name  : FLASH_ReadBlock -> Block Read
* Description    : Block Read from the flash
* Input 1        : Destination Address where the Data will be Stored
* Input 2        : Data Source Address
* Input 3        : Nbr of word to be Read
* Return         : Word
*******************************************************************************/
void FLASH_BlockRead(u32 DestAdd, u32 SourceAdd, u32 NbrData)
{
  u32 TmpaddrD,TmpaddrS,TmpNbrData;
  // Number of data to be Read from the Flash
  TmpNbrData = NbrData;
  // Source Address
  TmpaddrS = SourceAdd;
  // Destination Address
  TmpaddrD = DestAdd;

  IntFlash_Wait();

  while(TmpNbrData > 0)
  {
    *(u32 *)TmpaddrD = FLASH_WordRead(TmpaddrS);
    // Increase the Source Address
    TmpaddrS += 4;
    // Increase the Destination Address
    TmpaddrD += 4;
    // Decrease the Number of data to be read
    TmpNbrData --;
  }
}

/*******************************************************************************
* Function Name  : FLASH_WritePrConfig
* Description    : Configures The Write Protection Bits
* Input 1        : Flash Bank
* Input 2        : Enable Or disable Protection
* Return         : None
*******************************************************************************/
void FLASH_WritePrConfig(u32 Xsectors, FunctionalState NewState)
{
  u32 TmpProtection;

  TmpProtection = FLASHPR->NVWPAR;
  IntFlash_Wait();
  if (NewState == DISABLE) TmpProtection |= Xsectors;
  else TmpProtection &= ~Xsectors;
  // Set the Set protection Bit
  FLASHR->CR0 |= FLASH_SPR_Mask;
  // Set the Register Address
  FLASHR->AR  = 0x4010DFB0;
  // Data To be Programmed to the Protection Register
  FLASHR->DR0  = TmpProtection;
  // Set the WMS bit to Start the Sequence
  FLASHR->CR0 |= FLASH_WMS_Mask;
}

/*******************************************************************************
* Function Name  : FLASH_DebugPrConfig
* Description    : Configures The Debug Protection Bits
* Input 1        : ENABLE or DISABLE
* Return         : Word
*******************************************************************************/
void FLASH_DebugPrConfig(FunctionalState NewState)
{
  u16 TmpPEN, TmpPDS, TmpProtection;
  TmpPEN = (FLASHPR->NVAPR1 & 0xFFFF0000) >> 16;
  TmpPDS = (FLASHPR->NVAPR1 & 0x0000FFFF);

  if (NewState == ENABLE)
  {
    //  If the First Protection Reset the DBGP bit
    if ((FLASHPR->NVAPR0 & 0x2)==0x02) FLASHPR->NVAPR0 &= ~FLASH_DBGP_Mask;
    else FLASHPR->NVAPR1 = ResetBit(FLASHPR->NVAPR1, ProtectionLevel(TmpPEN) + 16);
    //  FLASHPR->NVAPR1 =  TmpPDS |((TmpPEN & ~(1<<ProtectionLevel(TmpPEN)))<< 16);
  }
  else
  {
    //  Test wether the Protection is already Enabled
    if ((FLASHPR->NVAPR0 & 0x2) == 0x0) FLASHPR->NVAPR1 = ResetBit(FLASHPR->NVAPR1, ProtectionLevel(TmpPDS));
    //  FLASHPR->NVAPR1 =(TmpPEN << 16)|(TmpPDS &~(1 << ProtectionLevel(TmpPDS)));
  }
  // Set the Set protection Bit
  FLASHR->CR0 |= FLASH_SPR_Mask;
  // Set the Register Address
  FLASHR->AR  = 0x4010DFB0;
  // Data To be Programmed to the Protection Register
  FLASHR->DR0 = TmpProtection;
  // Set the WMS bit to Start the Sequence
  FLASHR->CR0 |= FLASH_WMS_Mask;
}

/*******************************************************************************
* Function Name  : FLASH_FlagStatus
* Description    : Returns the NewState of Flash flags
* Input 1        : Flash Flag
* Return         : flagstate
*******************************************************************************/
FlagStatus FLASH_FlagStatus(flashflags Xflag)
{
  FlagStatus TmpResult;
  u8 TmpReg, TmpPos;
  // get the Register Index
  TmpReg = (Xflag & FLASH_Reg_Mask) >> 5;
  // get the Flag Index
  TmpPos = (Xflag & FLASH_Flag_Mask);

  switch(TmpReg)
  {
    case 0 : // CR0
    {
      // Returns the status of the CR0[TmpPos] flag
      TmpResult = (FLASHR->CR0 & (1<<TmpPos))==0 ? RESET : SET;
      break;
    }
    case 1 : // CR1
    {
      // Returns the status of the CR1[TmpPos] flag
      TmpResult = (FLASHR->CR1 & (1<<TmpPos))==0 ? RESET : SET;
      break;
    }
    case 5 : // ER
    {
      // Returns the status of the ER[TmpPos] flag
      TmpResult = (FLASHR->ER  & (1<<TmpPos))==0 ? RESET : SET;
      break;
    }
  }
  return(TmpResult);
}

/*******************************************************************************
* Function Name  : FLASH_FlagClear
* Description    : Clears a flash flag
* Input 1        : Flash Flag
* Return         : None
*******************************************************************************/
void FLASH_FlagClear(flashflags Xflag)
{
  u8 TmpReg, TmpPos;
  TmpReg = (Xflag & FLASH_Reg_Mask) >> 5;
  TmpPos = (Xflag & FLASH_Flag_Mask);

  switch(TmpReg)
  {
    case 0 : // CR0
    {
      // Clears the status of the CR0[TmpPos] flag
      FLASHR->CR0 &= ~(1<<TmpPos);
      break;
    }
    case 1 : // CR1
    {
      // Clears the status of the CR1[TmpPos] flag
      FLASHR->CR1 &= ~(1<<TmpPos);
      break;
    }
    case 5 : // ER
    {
      // Clears the status of the ER[TmpPos] flag
      FLASHR->ER &= ~(1<<TmpPos);
      break;
    }
  }
}

/*******************************************************************************
* Function Name  : ProtectionLevel
* Description    : Returns the Index of the Last bit used to Enable / Disable the
*                  Permanent protection.
* Input 1        : None
* Return         : None
*******************************************************************************/
u16 ProtectionLevel(u16 ProtectionRegs)
{
  u16 TmpBitIndex = 0;
  while ((ProtectionRegs & 0x1) == 0 && TmpBitIndex < 16)
  {
    ProtectionRegs>>=1;
    TmpBitIndex++;
  }
  return TmpBitIndex;
}

/*******************************************************************************
* Function Name  : Wait For Last Task
* Description    : Waits for the end of last task on a Flash Bank
* Input 1        : Bank number.
* Return         : The value passed in parameter with the bit (Bitindex) reset
*******************************************************************************/
void WaitForLastTask(flashbanks Xbank)
{
  if (Xbank == FLASH_BANK0) while (FLASH_FlagStatus(FLASH_BSY0) == SET);
  else while (FLASH_FlagStatus(FLASH_BSY1) == SET);
}

/*******************(C)COPYRIGHT 2003 STMicroelectronics *****END OF FILE****/