dis_condjsr,			/* Conditional jump to subroutine */  dis_dref,			/* Data reference instruction */  dis_dref2			/* Two data references in instruction */};/* This struct is passed into the instruction decoding routine,   and is passed back out into each callback.  The various fields are used   for conveying information from your main routine into your callbacks,   for passing information into the instruction decoders (such as the   addresses of the callback functions), or for passing information   back from the instruction decoders to their callers.   It must be initialized before it is first passed; this can be done   by hand, or using one of the initialization macros below.  */typedef struct disassemble_info {  fprintf_ftype fprintf_func;  FILE *stream;  PTR application_data;  /* Target description.  We could replace this with a pointer to the bfd,     but that would require one.  There currently isn't any such requirement     so to avoid introducing one we record these explicitly.  */  /* The bfd_flavour.  This can be bfd_target_unknown_flavour.  */  enum bfd_flavour flavour;  /* The bfd_arch value.  */  enum bfd_architecture arch;  /* The bfd_mach value.  */  unsigned long mach;  /* Endianness (for bi-endian cpus).  Mono-endian cpus can ignore this.  */  enum bfd_endian endian;  /* An array of pointers to symbols either at the location being disassembled     or at the start of the function being disassembled.  The array is sorted     so that the first symbol is intended to be the one used.  The others are     present for any misc. purposes.  This is not set reliably, but if it is     not NULL, it is correct.  */  asymbol **symbols;  /* Number of symbols in array.  */  int num_symbols;  /* For use by the disassembler.     The top 16 bits are reserved for public use (and are documented here).     The bottom 16 bits are for the internal use of the disassembler.  */  unsigned long flags;#define INSN_HAS_RELOC	0x80000000  PTR private_data;  /* Function used to get bytes to disassemble.  MEMADDR is the     address of the stuff to be disassembled, MYADDR is the address to     put the bytes in, and LENGTH is the number of bytes to read.     INFO is a pointer to this struct.     Returns an errno value or 0 for success.  */  int (*read_memory_func)    PARAMS ((bfd_vma memaddr, bfd_byte *myaddr, int length,	     struct disassemble_info *info));  /* Function which should be called if we get an error that we can't     recover from.  STATUS is the errno value from read_memory_func and     MEMADDR is the address that we were trying to read.  INFO is a     pointer to this struct.  */  void (*memory_error_func)    PARAMS ((int status, bfd_vma memaddr, struct disassemble_info *info));  /* Function called to print ADDR.  */  void (*print_address_func)    PARAMS ((bfd_vma addr, struct disassemble_info *info));  /* Function called to determine if there is a symbol at the given ADDR.     If there is, the function returns 1, otherwise it returns 0.     This is used by ports which support an overlay manager where     the overlay number is held in the top part of an address.  In     some circumstances we want to include the overlay number in the     address, (normally because there is a symbol associated with     that address), but sometimes we want to mask out the overlay bits.  */  int (* symbol_at_address_func)    PARAMS ((bfd_vma addr, struct disassemble_info * info));  /* These are for buffer_read_memory.  */  bfd_byte *buffer;  bfd_vma buffer_vma;  int buffer_length;  /* This variable may be set by the instruction decoder.  It suggests      the number of bytes objdump should display on a single line.  If      the instruction decoder sets this, it should always set it to      the same value in order to get reasonable looking output.  */  int bytes_per_line;  /* the next two variables control the way objdump displays the raw data */  /* For example, if bytes_per_line is 8 and bytes_per_chunk is 4, the */  /* output will look like this:     00:   00000000 00000000     with the chunks displayed according to "display_endian". */  int bytes_per_chunk;  enum bfd_endian display_endian;  /* Results from instruction decoders.  Not all decoders yet support     this information.  This info is set each time an instruction is     decoded, and is only valid for the last such instruction.     To determine whether this decoder supports this information, set     insn_info_valid to 0, decode an instruction, then check it.  */  char insn_info_valid;		/* Branch info has been set. */  char branch_delay_insns;	/* How many sequential insn's will run before				   a branch takes effect.  (0 = normal) */  char data_size;		/* Size of data reference in insn, in bytes */  enum dis_insn_type insn_type;	/* Type of instruction */  bfd_vma target;		/* Target address of branch or dref, if known;				   zero if unknown.  */  bfd_vma target2;		/* Second target address for dref2 */  /* Command line options specific to the target disassembler.  */  char * disassembler_options;} disassemble_info;/* Standard disassemblers.  Disassemble one instruction at the given   target address.  Return number of bytes processed.  */typedef int (*disassembler_ftype)     PARAMS((bfd_vma, disassemble_info *));extern int print_insn_big_mips		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_little_mips	PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_i386		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_m68k		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_z8001		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_z8002		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_h8300		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_h8300h		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_h8300s		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_h8500		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_alpha		PARAMS ((bfd_vma, disassemble_info*));extern disassembler_ftype arc_get_disassembler PARAMS ((int, int));extern int print_insn_arm		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_sparc		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_big_a29k		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_little_a29k	PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_i960		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_sh		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_shl		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_hppa		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_m32r		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_m88k		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_mn10200		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_mn10300		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_ns32k		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_big_powerpc	PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_little_powerpc	PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_rs6000		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_w65		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_d10v		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_v850		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_tic30		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_ppc		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_alpha             PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_s390		PARAMS ((bfd_vma, disassemble_info*));extern int print_insn_crisv32           PARAMS ((bfd_vma, disassemble_info*));#if 0/* Fetch the disassembler for a given BFD, if that support is available.  */extern disassembler_ftype disassembler	PARAMS ((bfd *));#endif/* This block of definitions is for particular callers who read instructions   into a buffer before calling the instruction decoder.  *//* Here is a function which callers may wish to use for read_memory_func.   It gets bytes from a buffer.  */extern int buffer_read_memory  PARAMS ((bfd_vma, bfd_byte *, int, struct disassemble_info *));/* This function goes with buffer_read_memory.   It prints a message using info->fprintf_func and info->stream.  */extern void perror_memory PARAMS ((int, bfd_vma, struct disassemble_info *));/* Just print the address in hex.  This is included for completeness even   though both GDB and objdump provide their own (to print symbolic   addresses).  */extern void generic_print_address  PARAMS ((bfd_vma, struct disassemble_info *));/* Always true.  */extern int generic_symbol_at_address  PARAMS ((bfd_vma, struct disassemble_info *));/* Macro to initialize a disassemble_info struct.  This should be called   by all applications creating such a struct.  */#define INIT_DISASSEMBLE_INFO(INFO, STREAM, FPRINTF_FUNC) \  (INFO).flavour = bfd_target_unknown_flavour, \  (INFO).arch = bfd_arch_unknown, \  (INFO).mach = 0, \  (INFO).endian = BFD_ENDIAN_UNKNOWN, \  INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC)/* Call this macro to initialize only the internal variables for the   disassembler.  Architecture dependent things such as byte order, or machine   variant are not touched by this macro.  This makes things much easier for   GDB which must initialize these things separately.  */#define INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC) \  (INFO).fprintf_func = (FPRINTF_FUNC), \  (INFO).stream = (STREAM), \  (INFO).symbols = NULL, \  (INFO).num_symbols = 0, \  (INFO).buffer = NULL, \  (INFO).buffer_vma = 0, \  (INFO).buffer_length = 0, \  (INFO).read_memory_func = buffer_read_memory, \  (INFO).memory_error_func = perror_memory, \  (INFO).print_address_func = generic_print_address, \  (INFO).symbol_at_address_func = generic_symbol_at_address, \  (INFO).flags = 0, \  (INFO).bytes_per_line = 0, \  (INFO).bytes_per_chunk = 0, \  (INFO).display_endian = BFD_ENDIAN_UNKNOWN, \  (INFO).disassembler_options = NULL, \  (INFO).insn_info_valid = 0#define _(x) x#define ATTRIBUTE_UNUSED __attribute__((unused))/* from libbfd */bfd_vma bfd_getl32 (const bfd_byte *addr);bfd_vma bfd_getb32 (const bfd_byte *addr);bfd_vma bfd_getl16 (const bfd_byte *addr);bfd_vma bfd_getb16 (const bfd_byte *addr);typedef enum bfd_boolean {false, true} boolean;typedef boolean bfd_boolean;#endif /* ! defined (DIS_ASM_H) */