/* This is a linker parameter file for the MC9S12XDT512 */

/*
This file is setup to use the HCS12X core only.
If you plan to also use the XGATE in your project, best create a new project with the
'New Project Wizard' (File|New... menu in the CodeWarrior IDE) and choose the appropriate
project parameters.
*/

NAMES
    /* CodeWarrior will pass all the needed files to the linker by command line. But here you may add your additional files */
END

SEGMENTS /* here all RAM/ROM areas of the device are listed. Used in PLACEMENT below. All addresses are 'logical' */
/* Register space  */
/*    IO_SEG        = PAGED         0x0000 TO   0x07FF; intentionally not defined */

/* non-paged EEPROM */
      EEPROM        = READ_ONLY     0x0C00 TO   0x0FFB; 

/* non-paged RAM */
      RAM           = READ_WRITE    0x2000 TO   0x3FFF; 

/* non-banked FLASH */
      ROM_4000      = READ_ONLY     0x4000 TO   0x7FFF; 
      ROM_C000      = READ_ONLY     0xC000 TO   0xFEFF; 
/*    VECTORS       = READ_ONLY     0xFF00 TO   0xFFFF; intentionally not defined: used for VECTOR commands below */
    //OSVECTORS     = READ_ONLY     0xFF10 TO   0xFFFF;  /* OSEK interrupt vectors (use your vector.o) */

/* paged EEPROM                     0x0800 TO   0x0BFF; addressed through EPAGE */
      EEPROM_FC     = READ_ONLY   0xFC0800 TO 0xFC0BFF; 
      EEPROM_FD     = READ_ONLY   0xFD0800 TO 0xFD0BFF; 
      EEPROM_FE     = READ_ONLY   0xFE0800 TO 0xFE0BFF; 
/*    EEPROM_FF     = READ_ONLY   0xFF0800 TO 0xFF0BFF; intentionally not defined: equivalent to EEPROM */

/* paged RAM:                       0x1000 TO   0x1FFF; addressed through RPAGE */
      RAM_FB        = READ_WRITE  0xFB1000 TO 0xFB1FFF; 
      RAM_FC        = READ_WRITE  0xFC1000 TO 0xFC1FFF; 
      RAM_FD        = READ_WRITE  0xFD1000 TO 0xFD1FFF; 
/*    RAM_FE        = READ_WRITE  0xFE1000 TO 0xFE1FFF; intentionally not defined: equivalent to RAM: 0x2000..0x2FFF */
/*    RAM_FF        = READ_WRITE  0xFF1000 TO 0xFF1FFF; intentionally not defined: equivalent to RAM: 0x3000..0x3FFF */

/* paged FLASH:                     0x8000 TO   0xBFFF; addressed through PPAGE */
      PAGE_E0       = READ_ONLY   0xE08000 TO 0xE0BFFF; 
      PAGE_E1       = READ_ONLY   0xE18000 TO 0xE1BFFF; 
      PAGE_E2       = READ_ONLY   0xE28000 TO 0xE2BFFF; 
      PAGE_E3       = READ_ONLY   0xE38000 TO 0xE3BFFF; 
      PAGE_E4       = READ_ONLY   0xE48000 TO 0xE4BFFF; 
      PAGE_E5       = READ_ONLY   0xE58000 TO 0xE5BFFF; 
      PAGE_E6       = READ_ONLY   0xE68000 TO 0xE6BFFF; 
      PAGE_E7       = READ_ONLY   0xE78000 TO 0xE7BFFF; 

      PAGE_E8       = READ_ONLY   0xE88000 TO 0xE8BFFF; 
      PAGE_E9       = READ_ONLY   0xE98000 TO 0xE9BFFF; 
      PAGE_EA       = READ_ONLY   0xEA8000 TO 0xEABFFF; 
      PAGE_EB       = READ_ONLY   0xEB8000 TO 0xEBBFFF; 
      PAGE_EC       = READ_ONLY   0xEC8000 TO 0xECBFFF; 
      PAGE_ED       = READ_ONLY   0xED8000 TO 0xEDBFFF; 
      PAGE_EE       = READ_ONLY   0xEE8000 TO 0xEEBFFF; 
      PAGE_EF       = READ_ONLY   0xEF8000 TO 0xEFBFFF; 

      PAGE_F0       = READ_ONLY   0xF08000 TO 0xF0BFFF; 
      PAGE_F1       = READ_ONLY   0xF18000 TO 0xF1BFFF; 
      PAGE_F2       = READ_ONLY   0xF28000 TO 0xF2BFFF; 
      PAGE_F3       = READ_ONLY   0xF38000 TO 0xF3BFFF; 
      PAGE_F4       = READ_ONLY   0xF48000 TO 0xF4BFFF; 
      PAGE_F5       = READ_ONLY   0xF58000 TO 0xF5BFFF; 
      PAGE_F6       = READ_ONLY   0xF68000 TO 0xF6BFFF; 
      PAGE_F7       = READ_ONLY   0xF78000 TO 0xF7BFFF; 

      PAGE_F8       = READ_ONLY   0xF88000 TO 0xF8BFFF; 
      PAGE_F9       = READ_ONLY   0xF98000 TO 0xF9BFFF; 
      PAGE_FA       = READ_ONLY   0xFA8000 TO 0xFABFFF; 
      PAGE_FB       = READ_ONLY   0xFB8000 TO 0xFBBFFF; 
      PAGE_FC       = READ_ONLY   0xFC8000 TO 0xFCBFFF; 
/*    PAGE_FD       = READ_ONLY   0xFD8000 TO 0xFDBFFF; intentionally not defined: equivalent to ROM_4000 */
      PAGE_FE       = READ_ONLY   0xFE8000 TO 0xFEBFFF; 
/*    PAGE_FF       = READ_ONLY   0xFF8000 TO 0xFFBFFF; intentionally not defined: equivalent to ROM_C000 */
END

PLACEMENT /* here all predefined and user segments are placed into the SEGMENTS defined above. */
      _PRESTART,              /* Used in HIWARE format: jump to _Startup at the code start */
      STARTUP,                /* startup data structures */
      ROM_VAR,                /* constant variables */
      STRINGS,                /* string literals */
      VIRTUAL_TABLE_SEGMENT,  /* C++ virtual table segment */
    //.ostext,                /* eventually OSEK code  */
      NON_BANKED,             /* runtime routines which must not be banked */
      COPY                    /* copy down information: how to initialize variables */
                              /* in case you want to use ROM_4000 here as well, make sure
                                 that all files (incl. library files) are compiled with the
                                 option: -OnB=b */
                        INTO  ROM_C000/*, ROM_4000*/;

      DEFAULT_ROM       INTO           PAGE_FE,          PAGE_FC, PAGE_FB, PAGE_FA, PAGE_F9, PAGE_F8, 
                              PAGE_F7, PAGE_F6, PAGE_F5, PAGE_F4, PAGE_F3, PAGE_F2, PAGE_F1, PAGE_F0, 
                              PAGE_EF, PAGE_EE, PAGE_ED, PAGE_EC, PAGE_EB, PAGE_EA, PAGE_E9, PAGE_E8, 
                              PAGE_E7, PAGE_E6, PAGE_E5, PAGE_E4, PAGE_E3, PAGE_E2, PAGE_E1, PAGE_E0;

    //.stackstart,            /* eventually used for OSEK kernel awareness: Main-Stack Start */
      SSTACK,                 /* allocate stack first to avoid overwriting variables on overflow */
    //.stackend,              /* eventually used for OSEK kernel awareness: Main-Stack End */
      DEFAULT_RAM             /* all variables, the default RAM location */
                        INTO  RAM;

      PAGED_RAM         INTO  /* when using banked addressing for variable data, make sure to specify
                                 the option -D__FAR_DATA on the compiler command line */
                              RAM_FB, RAM_FC, RAM_FD;

    //.vectors          INTO  OSVECTORS; /* OSEK vector table */
END


ENTRIES /* keep the following unreferenced variables */
    /* OSEK: always allocate the vector table and all dependent objects */
  //_vectab OsBuildNumber _OsOrtiStackStart _OsOrtiStart
END

STACKSIZE 0x100   /* size of the stack (will be allocated in DEFAULT_RAM) */

/* use these definitions in plane of the vector table ('vectors') above */
VECTOR 0 _Startup /* reset vector: this is the default entry point for a C/C++ application. */
//VECTOR 0 Entry  /* reset vector: this is the default entry point for an Assembly application. */
//INIT Entry      /* for assembly applications: that this is as well the initialization entry point */