/******************************************************************************
*
* Purpose:      Application_defines.h
*
* Creator:      Rob Lansbergen
*
* Version:		$Revision: 4 $
*
* File Name:	$Workfile: Application_defines.h $
*
* Author:		Rob Lansbergen
*
* Check in:		$Author: Chong.cheeleong $
*
* The information is provided 揳s is?without any express or implied warranty
* of any kind, * including warranties of merchantability, noninfringement of
* intellectual property, or fitness for any particular purpose. In no event sha
* Wireless Sound Solutions and/or its affiliate companies, or its suppliers be
* liable for any damages whatsoever arising out of the use of or inability to
* use the information or the materials. Wireless Sound Solutions, its affiliate
* companies, and its suppliers further do not warrant the accuracy or
* completeness of information, text, graphics, or other items contained within
* materials. Wireless Sound Solutions, Inc., may make changes to materials, or
* the products described within, at any time, without notice.
* ?007 Wireless Sound Solutions. All rights reserved. Wireless Sound Solutions
* STS and STS-wireless are trademarks of Wireless Sound Solutions.
******************************************************************************/
#ifndef APPLICATION_DEFINES_H
#define APPLICATION_DEFINES_H

/*******************************************************************************************/
#ifdef PCB_PNP80_UNIVERSAL_TRX

    //
	
#ifdef DWAM80_RX_CS4341
  	#define CODEC_CS4341
	#define MAX_VOLUME		0
	#define START_UP_VOLUME 0
#else
	#define CODEC_CS4251
	#define MAX_VOLUME		255
	#define START_UP_VOLUME 180
#endif
	#define VOLUME_CODEC                //Volume Control by Codec
	#define NO_GUI                      //No data monitoring in GUI
	#define PDDC_SETTING	0x12

#ifdef TRXCU	//TX used 	Allan	// 3 Nack CU
		//************** setting for 3 NACK TX ***************************/
    #define Target_CU		
	#define CODEC_CS5341	//Allan  Add
	
    #define FILL_CONFIG_BYTES { Config_Byte1 = 0x02; \
					Config_Byte2 = 0x87; \
					Config_Byte3 = 0x01;}
#else			//RX used 	Allan// 3 Nack MU
		//************** setting for 3 NACK RX ***************************/
    #define Target_MU       
		
    #define FILL_CONFIG_BYTES { Config_Byte1 = 0x22; \
					Config_Byte2 = 0x87; \
					Config_Byte3 = 0x01;}
#endif

#define No_Application_Use  4   /*For use in Auto COnfiguration Function*/

/*For ROM size constraint: choose only the application use*/
	#define Stereo_3_NAck_CF1

#endif /* end PCB_PNP80_UNIVERSAL_TRX */

#endif   /* APPLICATION_DEFINES_H */












/*******************************************************************************************
*	ConfigByte 1:
*		Bit 0-4	: Application selection	:	bit0-Stereo_1_NAck_CF1
										bit1-Stereo_2_NAck_CF1
										bit2-Stereo_3_NAck_CF1
										bit3-Stereo_4_NAck_CF1
										bit4-HeadSet_2
										bit5-HeadSet_1
*		Bit 5 	: 1 = MU, 0 = CU
*		Bit 6	: 1 = Use Continuous RX TX
*		Bit 7	: 1 = Use MU CU Swap
*
*	ConfigByte 2:
*		Bit 0-3	: Stream Enable
*		Bit 4	: 1 = Auto Snooze enable auto powerdown when no audio is detected
*		Bit 5   : Reserved (Production) (should always be zero)
*		Bit 6   : 1 = Use SPDIF as Audio Interface | 0 = I2S
*		Bit 7   : 1 = Use Nack Report
*
*	ConfigByte 3:
*		Bit 0	: 1 = Use Own WLAN Detection
*		Bit 1-6	: free
*       Bit 7   : 1 = Auto Config
*/