--- Atheros Radio Test (ART) ---
              - Revision 1.0 BUILD #2 v53_dragon
            - Customer Version -

Reading in Configuration Setup from artsetup.txt
Calsetupfile Used : calsetup.txt
Opening device /dev/dksdio0
Client Version = 1.0 Build 2
Boot rom version e.88
SNOOP: freq at 1= 5360
SNOOP: freq = 5360, channelMasks = 0
Device Number 0:resetDevice
**** Analog Revision = 19
Devlib Revision 1.0 BUILD #2 v53_dragon


                     ===============================================
                     |               UNKNOWN TYPE|
                     ===============================================

Devices detected:
   PCI deviceID     : 0xf0d0	Sub systemID     : 0x6011
   MAC revisionID   : 0x00	BB  revisionID   : 0x70
   RF  productID    : 0x9	RF  revisionID   : 0x0

Using defaults from : 
	//depot/sw/branches/ART_V53_dragon/bringup/ar5k/config/dragon2_0.cfg#4

Loading values for devNum [0] from eep file .//ar6000_sd11g.eep


Reading in Calibration Setup from calsetup.txt
SNOOP: freq at 1= 5360
SNOOP: freq = 5360, channelMasks = 0
Device Number 0:resetDevice
Attached to the Device for instance = 1
BOARD PARAMETERS EEPROM_SIZE = 100000  checkSumLength = f2d
!!!!BOARD PARAMETERS EEPROM_SIZE = 100  checkSumLength = 100
SNOOP: freq at 1= 5360
SNOOP: freq = 5360, channelMasks = 0
Device Number 0:resetDevice
Loading values for devNum [0] from eep file .//ar6000_sd11g.eep


Reading in Calibration Setup from calsetup.txt
SNOOP: freq at 1= 5360
SNOOP: freq = 5360, channelMasks = 0
Device Number 0:resetDevice
SNOOP: freq at 1= 5360
SNOOP: freq = 5360, channelMasks = 0
Device Number 0:resetDevice
Loading values for devNum [0] from eep file .//ar6000_sd11g.eep

Operating in 11g at channel 2.412GHz
SNOOP: freq at 1= 2412
SNOOP: freq = 2412, channelMasks = 0
Device Number 0:resetDevice
                     =============================================
                     |              UNKNOWN BOARD                |
                     =============================================
Devlib Revision 1.0 BUILD #2 v53_dragon
Devices detected:
   PCI deviceID  : 0xf0d0	Sub systemID  : 0x6011
   MAC revisionID: 0x00  	BB  revisionID: 0x70
   RF  productID : 0x9   	RF  revisionID: 0x0

Using defaults from //depot/sw/branches/ART_V53_dragon/bringup/ar5k/config/dragon2_0.cfg#4

Base Addr: 0xAFFF0000  Interrupt: 4
Wireless MAC ADDR: 0x1661_017F_0300
Ref clk speed = 2

============================================
| Test Harness Main Options:               |
|   e - Load (E)EPROM Calibration          |
|   c - (C)ontinuous transmit mode         |
|   r - Continuous RF (R)eceive mode       |
|   l - (L)ink test menu                   |
|   t - (T)hroughput test menu             |
|   p - EE(P)ROM function                  |
|   m - (M)anufacturing/Calibration Test   |
|   g - Enable lo(g)ging                   |
|   u - (U)tility Menu                     |
|   i - (N)oise Immunity Menu              |
|   d - Enable deep sleep|
|   q - (Q)uit                             |
============================================
Unknown command