# target power file for AR6000 802.11a/b/g with super a/g TB111 Reference Design card

# 11a Target Power table : 
#	 Rules:
#		1. up to a maximum of 8 test frequencies
#		2. test frequencies DO NOT need to cover the entire range of 5180-5850. It
#		   is allowed to provide data for a smaller range. for all channels
#		   outside of test frequencies range, target power will be assumed 0dB.
#		3. specify mask/PER limited target power for various rates
#
#BEGIN_11a_TARGET_POWER_TABLE  
#  test_frequencies   6-24_target  36_target 48_target   54_target  
								     
   5180                 14                12       10          9
   5240			14		  12	   10	       9   
   5320			14		  12	   10	       9   
   5440			14		  12	   10	       9   
   5460			14		  12	   10	       9   
   5500			14		  12	   10	       9   
   5700			14		  12       10	       9   
   5745			14		  12	   10	       9   
											         

#END_11a_TARGET_POWER_TABLE


# 11b Target Power table : 
#	 Rules:
#		1. Need to define exactly 2 test frequencies in 2.412 - 2.484 G range. 
#		2. test frequencies DO NOT need to cover the entire range of 2412-2484. It
#		   is allowed to provide data for a smaller range. for all channels
#		   outside of test frequencies range, target power will be assumed 0dB.
#		3. specify mask/PER limited target power for various rates
#
#BEGIN_11b_TARGET_POWER_TABLE  
#  test_frequencies   1_target   2_target 5.5_target 11_target  
							       
   2412			15	    15	     15	       10
   2484			15	    15	     15	       10

#END_11b_TARGET_POWER_TABLE

# ofdm@2p4 Target Power table : 
#	 Rules:
#		1. up to a maximum of 3 test frequencies in 2.412 - 2.484 G range
#		2. test frequencies DO NOT need to cover the entire range of 2412-2484. It
#		   is allowed to provide data for a smaller range. for all channels
#		   outside of test frequencies range, target power will be assumed 0dB.
#		3. specify mask/PER limited target power for various rates
#
#BEGIN_11g_TARGET_POWER_TABLE  
#  test_frequencies   6-24_target  36_target 48_target   54_target  
								    
   2412			15	    14     	13	11  
   2437			15	    14     	13	11 
   2472			15	    14     	13	11	    

#END_11g_TARGET_POWER_TABLE

# Test Groups :
#      Rules:
#		1. Specify up to 8 band edges for each test group.
#		2. If no backoff desired at a band edge, give a large number (e.g, 30) so
#		   that the driver determined limit becomes the target power.
#

#BEGIN_TEST_GROUPS

# Test Group 1: US and CANADA (FCC)
#	test_group_code	BE1	BE2	BE3	BE4	BE5	BE6	BE7       BE8
	0x10		5180	5200	5260	5320	5500	5520	5700      5745
                14.5    14.5    17      17      17      17      17        17 # Band Edge Max Power
			    0	1	1	0	0	1	0         1  # in-band flag


# Test Group 3: US and CANADA (FCC) 802.11b mode CTL
# test_group_code	BE1	BE2	BE3	
	0x11		2412	2437	2442		
			    17	18	17	# Band Edge Max Power
			    1	0	1	# in-band flag

# Test Group 4: US and CANADA (FCC) 802.11g mode CTL
# test_group_code	BE1	BE2	BE3	BE4	
	0x12		2412	2417	2457	2462		
			    16	18	18	17	# Band Edge Max Power
			    0	1	0	0	# in-band flag


# Test Group 6: JAPAN (MKK)
# test_group_code	BE1	BE2	
	0x40		5170	5230	
			    17	17	  # Band Edge Max Power
			    0	0	  # in-band flag


# Test Group 7: EUROPE (ETSI)
# test_group_code	BE1	BE2	BE3	BE4	BE5	BE6	BE7	
	0x30		5180	5320	5500	5700    5745    5765	5825	  
			    17	17	17	17      17      17	17	# Band Edge Max Power
			    0	0	0	0	0	1	0	# in-band flag

# Test Group 8: EUROPE (ETSI) 802.11b mode CTL
#	test_group_code	BE1	BE2	BE3	
	0x31		2412	2417	2472		
			    16	16	16	# Band Edge Max Power
			    0	1	0	# in-band flag

# Test Group 9: EUROPE (ETSI) 802.11g mode CTL
#	test_group_code	BE1	BE2	BE3	
	0x32		2412	2417	2472		
			    11.5	11.5	11.5	# Band Edge Max Power
			    0	1	0	# in-band flag


#END_TEST_GROUPS