#define BANDB_USO9ML2_PID	0xAC03	/* USO9ML2 Isolated RS-232 Converter *//* * RM Michaelides CANview USB (http://www.rmcan.com) * CAN fieldbus interface adapter, added by port GmbH www.port.de) * Ian Abbott changed the macro names for consistency. */#define FTDI_RM_CANVIEW_PID	0xfd60	/* Product Id *//* * EVER Eco Pro UPS (http://www.ever.com.pl/) */#define	EVER_ECO_PRO_CDS	0xe520	/* RS-232 converter *//* * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, * USB-TTY activ, USB-TTY passiv.  Some PIDs are used by several devices * and I'm not entirely sure which are used by which. */#define FTDI_4N_GALAXY_DE_1_PID	0xF3C0#define FTDI_4N_GALAXY_DE_2_PID	0xF3C1/* * Mobility Electronics products. */#define MOBILITY_VID			0x1342#define MOBILITY_USB_SERIAL_PID		0x0202	/* EasiDock USB 200 serial *//* * microHAM product IDs (http://www.microham.com). * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. */#define FTDI_MHAM_KW_PID 0xEEE8		/* USB-KW interface */#define FTDI_MHAM_YS_PID 0xEEE9		/* USB-YS interface */#define FTDI_MHAM_Y6_PID 0xEEEA		/* USB-Y6 interface */#define FTDI_MHAM_Y8_PID 0xEEEB		/* USB-Y8 interface */#define FTDI_MHAM_IC_PID 0xEEEC		/* USB-IC interface */#define FTDI_MHAM_DB9_PID 0xEEED	/* USB-DB9 interface */#define FTDI_MHAM_RS232_PID 0xEEEE	/* USB-RS232 interface */#define FTDI_MHAM_Y9_PID 0xEEEF		/* USB-Y9 interface *//* * Active Robots product ids. */#define FTDI_ACTIVE_ROBOTS_PID	0xE548	/* USB comms board *//* * Xsens Technologies BV products (http://www.xsens.com). */#define XSENS_CONVERTER_0_PID	0xD388#define XSENS_CONVERTER_1_PID	0xD389#define XSENS_CONVERTER_2_PID	0xD38A#define XSENS_CONVERTER_3_PID	0xD38B#define XSENS_CONVERTER_4_PID	0xD38C#define XSENS_CONVERTER_5_PID	0xD38D#define XSENS_CONVERTER_6_PID	0xD38E#define XSENS_CONVERTER_7_PID	0xD38F/* * Teratronik product ids. * Submitted by O. W?lfelschneider. */#define FTDI_TERATRONIK_VCP_PID	 0xEC88	/* Teratronik device (preferring VCP driver on windows) */#define FTDI_TERATRONIK_D2XX_PID 0xEC89	/* Teratronik device (preferring D2XX driver on windows) *//* * Evolution Robotics products (http://www.evolution.com/). * Submitted by Shawn M. Lavelle. */#define EVOLUTION_VID		0xDEEE	/* Vendor ID */#define EVOLUTION_ER1_PID	0x0300	/* ER1 Control Module */#define EVO_8U232AM_PID	0x02FF	/* Evolution robotics RCM2 (FT232AM)*/#define EVO_HYBRID_PID		0x0302	/* Evolution robotics RCM4 PID (FT232BM)*/#define EVO_RCM4_PID		0x0303	/* Evolution robotics RCM4 PID *//* Pyramid Computer GmbH */#define FTDI_PYRAMID_PID	0xE6C8	/* Pyramid Appliance Display *//* * Posiflex inc retail equipment (http://www.posiflex.com.tw) */#define POSIFLEX_VID		0x0d3a  /* Vendor ID */#define POSIFLEX_PP7000_PID	0x0300  /* PP-7000II thermal printer *//* * Westrex International devices submitted by Cory Lee */#define FTDI_WESTREX_MODEL_777_PID	0xDC00	/* Model 777 */#define FTDI_WESTREX_MODEL_8900F_PID	0xDC01	/* Model 8900F *//* * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) */#define FTDI_RRCIRKITS_LOCOBUFFER_PID	0xc7d0	/* LocoBuffer USB *//* * Eclo (http://www.eclo.pt/) product IDs. * PID 0xEA90 submitted by Martin Grill. */#define FTDI_ECLO_COM_1WIRE_PID	0xEA90	/* COM to 1-Wire USB adaptor *//* * Papouch products (http://www.papouch.com/) * Submitted by Folkert van Heusden */#define PAPOUCH_VID			0x5050	/* Vendor ID */#define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer *//* * ACG Identification Technologies GmbH products (http://www.acg.de/). * Submitted by anton -at- goto10 -dot- org. */#define FTDI_ACG_HFDUAL_PID		0xDD20	/* HF Dual ISO Reader (RFID) *//* * Yost Engineering, Inc. products (www.yostengineering.com). * PID 0xE050 submitted by Aaron Prose. */#define FTDI_YEI_SERVOCENTER31_PID	0xE050	/* YEI ServoCenter3.1 USB *//* * ThorLabs USB motor drivers */#define FTDI_THORLABS_PID		0xfaf0 /* ThorLabs USB motor drivers *//* * Testo products (http://www.testo.com/) * Submitted by Colin Leroy */#define TESTO_VID			0x128D#define TESTO_USB_INTERFACE_PID		0x0001/* * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. */#define FTDI_GAMMA_SCOUT_PID		0xD678	/* Gamma Scout online *//* * Tactrix OpenPort (ECU) devices. * OpenPort 1.3M submitted by Donour Sizemore. * OpenPort 1.3S and 1.3U submitted by Ian Abbott. */#define FTDI_TACTRIX_OPENPORT_13M_PID	0xCC48	/* OpenPort 1.3 Mitsubishi */#define FTDI_TACTRIX_OPENPORT_13S_PID	0xCC49	/* OpenPort 1.3 Subaru */#define FTDI_TACTRIX_OPENPORT_13U_PID	0xCC4A	/* OpenPort 1.3 Universal *//* * Telldus Technologies */#define TELLDUS_VID			0x1781	/* Vendor ID */#define TELLDUS_TELLSTICK_PID		0x0C30	/* RF control dongle 433 MHz using FT232RL *//* * IBS elektronik product ids * Submitted by Thomas Schleusener */#define FTDI_IBS_US485_PID	0xff38  /* IBS US485 (USB<-->RS422/485 interface) */#define FTDI_IBS_PICPRO_PID	0xff39  /* IBS PIC-Programmer */#define FTDI_IBS_PCMCIA_PID	0xff3a  /* IBS Card reader for PCMCIA SRAM-cards */#define FTDI_IBS_PK1_PID	0xff3b  /* IBS PK1 - Particel counter */#define FTDI_IBS_RS232MON_PID	0xff3c  /* IBS RS232 - Monitor */#define FTDI_IBS_APP70_PID	0xff3d  /* APP 70 (dust monitoring system) */#define FTDI_IBS_PEDO_PID	0xff3e  /* IBS PEDO-Modem (RF modem 868.35 MHz) */#define FTDI_IBS_PROD_PID	0xff3f  /* future device *//* *  MaxStream devices	www.maxstream.net */#define FTDI_MAXSTREAM_PID	0xEE18	/* Xbee PKG-U Module *//* Olimex */#define OLIMEX_VID			0x15BA#define OLIMEX_ARM_USB_OCD_PID		0x0003/* www.elsterelectricity.com Elster Unicom III Optical Probe */#define FTDI_ELSTER_UNICOM_PID		0xE700 /* Product Id *//* * The Mobility Lab (TML) * Submitted by Pierre Castella */#define TML_VID			0x1B91	/* Vendor ID */#define TML_USB_SERIAL_PID	0x0064	/* USB - Serial Converter *//* Commands */#define FTDI_SIO_RESET 		0 /* Reset the port */#define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */#define FTDI_SIO_SET_FLOW_CTRL	2 /* Set flow control register */#define FTDI_SIO_SET_BAUD_RATE	3 /* Set baud rate */#define FTDI_SIO_SET_DATA	4 /* Set the data characteristics of the port */#define FTDI_SIO_GET_MODEM_STATUS	5 /* Retrieve current value of modern status register */#define FTDI_SIO_SET_EVENT_CHAR	6 /* Set the event character */#define FTDI_SIO_SET_ERROR_CHAR	7 /* Set the error character */#define FTDI_SIO_SET_LATENCY_TIMER	9 /* Set the latency timer */#define FTDI_SIO_GET_LATENCY_TIMER	10 /* Get the latency timer *//* Interface indicies for FT2232, FT2232H and FT4232H devices*/#define INTERFACE_A		1#define INTERFACE_B		2#define INTERFACE_C		3#define INTERFACE_D		4/* *   BmRequestType:  1100 0000b *   bRequest:       FTDI_E2_READ *   wValue:         0 *   wIndex:         Address of word to read *   wLength:        2 *   Data:           Will return a word of data from E2Address * *//* Port Identifier Table */#define PIT_DEFAULT 		0 /* SIOA */#define PIT_SIOA		1 /* SIOA *//* The device this driver is tested with one has only one port */#define PIT_SIOB		2 /* SIOB */#define PIT_PARALLEL		3 /* Parallel *//* FTDI_SIO_RESET */#define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET#define FTDI_SIO_RESET_REQUEST_TYPE 0x40#define FTDI_SIO_RESET_SIO 0#define FTDI_SIO_RESET_PURGE_RX 1#define FTDI_SIO_RESET_PURGE_TX 2/* * BmRequestType:  0100 0000B * bRequest:       FTDI_SIO_RESET * wValue:         Control Value  *                   0 = Reset SIO *                   1 = Purge RX buffer *                   2 = Purge TX buffer * wIndex:         Port * wLength:        0 * Data:           None * * The Reset SIO command has this effect: * *    Sets flow control set to 'none' *    Event char = $0D *    Event trigger = disabled *    Purge RX buffer *    Purge TX buffer *    Clear DTR *    Clear RTS *    baud and data format not reset * * The Purge RX and TX buffer commands affect nothing except the buffers *   *//* FTDI_SIO_SET_BAUDRATE */#define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40#define FTDI_SIO_SET_BAUDRATE_REQUEST 3/* * BmRequestType:  0100 0000B * bRequest:       FTDI_SIO_SET_BAUDRATE * wValue:         BaudDivisor value - see below * wIndex:         Port * wLength:        0 * Data:           None * The BaudDivisor values are calculated as follows: * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish *   I knew how to detect old chips to select proper base clock! * - BaudDivisor is a fixed point number encoded in a funny way. *   (--WRONG WAY OF THINKING--) *   BaudDivisor is a fixed point number encoded with following bit weighs: *   (-2)(-1)(13..0). It is a radical with a denominator of 4, so values *   end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...). *   (--THE REALITY--) *   The both-bits-set has quite different meaning from 0.75 - the chip designers *   have decided it to mean 0.125 instead of 0.75. *   This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates *   and Flow Control Consideration for USB to RS232". * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should *   automagically re-encode the resulting value to take fractions into consideration. * As all values are integers, some bit twiddling is in order: *   BaudDivisor = (BaseClock / 16 / BaudRate) | *   (((BaseClock / 2 / BaudRate) & 4) ? 0x4000    // 0.5 *    : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000  // 0.25 *    : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000  // 0.125 *    : 0) * * For the FT232BM, a 17th divisor bit was introduced to encode the multiples * of 0.125 missing from the FT8U232AM.  Bits 16 to 14 are coded as follows * (the first four codes are the same as for the FT8U232AM, where bit 16 is * always 0): *   000 - add .000 to divisor *   001 - add .500 to divisor *   010 - add .250 to divisor *   011 - add .125 to divisor *   100 - add .375 to divisor *   101 - add .625 to divisor *   110 - add .750 to divisor *   111 - add .875 to divisor * Bits 15 to 0 of the 17-bit divisor are placed in the urb value.  Bit 16 is  * placed in bit 0 of the urb index. * * Note that there are a couple of special cases to support the highest baud * rates.  If the calculated divisor value is 1, this needs to be replaced with * 0.  Additionally for the FT232BM, if the calculated divisor value is 0x4001 * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is * not supported by the FT8U232AM). */typedef enum {	SIO = 1,	FT8U232AM = 2,	FT232BM = 3,	FT2232C = 4,	FT232RL = 5,	FT2232H = 6,	FT4232H = 7} ftdi_chip_type_t;typedef enum { ftdi_sio_b300 = 0,  ftdi_sio_b600 = 1,  ftdi_sio_b1200 = 2, ftdi_sio_b2400 = 3, ftdi_sio_b4800 = 4, ftdi_sio_b9600 = 5, ftdi_sio_b19200 = 6, ftdi_sio_b38400 = 7, ftdi_sio_b57600 = 8, ftdi_sio_b115200 = 9} FTDI_SIO_baudrate_t ;/* * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values * are calculated internally. */#define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA#define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40#define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 )#define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 )#define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 )#define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 )#define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 )#define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11 )#define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11 )#define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11 )#define FTDI_SIO_SET_BREAK (0x1 << 14)/* FTDI_SIO_SET_DATA *//* * BmRequestType:  0100 0000B  * bRequest:       FTDI_SIO_SET_DATA * wValue:         Data characteristics (see below) * wIndex:         Port * wLength:        0 * Data:           No * * Data characteristics