#Setup.tcl 
# Setup pin setting for EP2C5_EP2C8 main board 
set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS INPUT TRI-STATED" 
set_global_assignment -name ENABLE_INIT_DONE_OUTPUT OFF 
set_location_assignment PIN_23 -to clk                                
set_location_assignment PIN_56 -to reset     

#led
set_location_assignment PIN_6 -to led\[0\] 

set_location_assignment PIN_5 -to led\[1\]
set_location_assignment PIN_3 -to led\[2\] 
set_location_assignment PIN_4 -to led\[3\]


#rxd
set_location_assignment PIN_145 -to uart_rxd
set_location_assignment PIN_146 -to uart_txd

set_location_assignment PIN_106 -to rxd_usb
set_location_assignment PIN_107 -to txd_usb