?? mac_mem.lst
字號:
##############################################################################
# #
# IAR 8051 C/C++ Compiler V7.20H/W32 08/Mar/2009 09:13:22 #
# Copyright 2004-2006 IAR Systems. All rights reserved. #
# #
# Core = plain #
# Code model = banked #
# Data model = large #
# Calling convention = xdata reentrant #
# Constant location = data #
# Dptr setup = 1,16 #
# Source file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Component #
# s\mac\low_level\srf03\single_chip\mac_mem.c #
# Command line = -f "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Proje #
# cts\zstack\Samples\GenericApp\CC2430DB\..\..\..\T #
# ools\CC2430DB\f8wCoord.cfg" (-DCPU32MHZ #
# -DFORCE_MAC_NEAR -DROOT=__near_func #
# -DMAC_CFG_APP_PENDING_QUEUE=TRUE #
# -DZDO_COORDINATOR -DRTR_NWK -DBLINK_LEDS #
# "-DCONST=const __code" -DGENERIC=__generic) -f #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\GenericApp\CC2430DB\..\..\..\Tool #
# s\CC2430DB\f8wConfig.cfg" (-DSECURE=0 #
# -DDEFAULT_CHANLIST=0x00000800 #
# -DZDAPP_CONFIG_PAN_ID=0xFFFF #
# -DNWK_START_DELAY=100 -DEXTENDED_JOINING_RANDOM_M #
# ASK=0x007F -DBEACON_REQUEST_DELAY=100 #
# -DBEACON_REQ_DELAY_MASK=0x00FF #
# -DROUTE_EXPIRY_TIME=30 -DAPSC_ACK_WAIT_DURATION_P #
# OLLED=3000 -DNWK_INDIRECT_MSG_TIMEOUT=7 #
# -DMAX_RREQ_ENTRIES=10 -DAPSC_MAX_FRAME_RETRIES=3 #
# -DNWK_MAX_DATA_RETRIES=2 #
# -DMAX_POLL_FAILURE_RETRIES=2 -DMAX_BCAST=9 #
# -DAPS_MAX_GROUPS=16 -DMAX_RTG_ENTRIES=20 #
# -DNWK_MAX_BINDING_ENTRIES=10 #
# -DMAX_BINDING_CLUSTER_IDS=5 #
# "-DDEFAULT_KEY={0x01, 0x03, 0x05, 0x07, 0x09, #
# 0x0B, 0x0D, 0x0F, 0x00, 0x02, 0x04, 0x06, 0x08, #
# 0x0A, 0x0C, 0x0D}" -DRFD_RCVC_ALWAYS_ON=FALSE #
# -DPOLL_RATE=1000 -DQUEUED_POLL_RATE=100 #
# -DRESPONSE_POLL_RATE=100 -DREJOIN_POLL_RATE=440 #
# -DTOP_BOOT_PAGES=0) -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\" -I "C:\Program Files\IAR #
# Systems\Embedded Workbench 4.05 Evaluation #
# version\8051\inc\clib\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\Source\" -I #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\GenericApp\CC2430DB\..\..\..\ZMai #
# n\TI2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\mt\" -I "C:\Texas Instruments\ZStack-1.4.2-1.1 #
# .0\Projects\zstack\Samples\GenericApp\CC2430DB\.. #
# \..\..\..\..\Components\hal\include\" -I #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\GenericApp\CC2430DB\..\..\..\..\. #
# .\Components\hal\target\CC2430DB\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\osal\mcu\ccsoc\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\osal\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\stack\af\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\stack\nwk\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\stack\sec\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\stack\sys\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\stack\zdo\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\zmac\f8w\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\zmac\" -I "C:\Texas Instruments\ZStack-1.4.2-1 #
# .1.0\Projects\zstack\Samples\GenericApp\CC2430DB\ #
# ..\..\..\..\..\Components\services\saddr\" -I #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\GenericApp\CC2430DB\..\..\..\..\. #
# .\Components\services\sdata\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\mac\include\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\mac\high_level\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\mac\low_level\srf03\" -I "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\..\..\..\..\..\Componen #
# ts\mac\low_level\srf03\single_chip\" -D CC2430DB #
# -D COORDINATOR_BINDING -D xZTOOL_P2 -D xMT_TASK #
# -D xMT_ZDO_FUNC -D xLCD_SUPPORTED=DEBUG -lC #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects #
# \zstack\Samples\GenericApp\CC2430DB\CoordinatorDB #
# \List\" -lA "C:\Texas Instruments\ZStack-1.4.2-1. #
# 1.0\Projects\zstack\Samples\GenericApp\CC2430DB\C #
# oordinatorDB\List\" --diag_suppress Pe001,Pa010 #
# --diag_remark pe550 -o "C:\Texas #
# Instruments\ZStack-1.4.2-1.1.0\Projects\zstack\Sa #
# mples\GenericApp\CC2430DB\CoordinatorDB\Obj\" -e #
# --require_prototypes -z9 --no_code_motion #
# --debug --core=plain --dptr=16,1 #
# --data_model=large --code_model=banked #
# --calling_convention=xdata_reentrant #
# --place_constants=data --nr_virtual_regs 8 #
# "C:\Texas Instruments\ZStack-1.4.2-1.1.0\Componen #
# ts\mac\low_level\srf03\single_chip\mac_mem.c" #
# List file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
# zstack\Samples\GenericApp\CC2430DB\CoordinatorDB\ #
# List\mac_mem.lst #
# Object file = C:\Texas Instruments\ZStack-1.4.2-1.1.0\Projects\ #
# zstack\Samples\GenericApp\CC2430DB\CoordinatorDB\ #
# Obj\mac_mem.r51 #
# #
# #
##############################################################################
C:\Texas Instruments\ZStack-1.4.2-1.1.0\Components\mac\low_level\srf03\single_chip\mac_mem.c
1 /**************************************************************************************************
2 Filename:
3 Revised: $Date: 2006-11-16 13:51:15 -0800 (Thu, 16 Nov 2006) $
4 Revision: $Revision: 12756 $
5
6 Description:
7
8 Describe the purpose and contents of the file.
9
10 Copyright (c) 2006 by Texas Instruments, Inc.
11 All Rights Reserved. Permission to use, reproduce, copy, prepare
12 derivative works, modify, distribute, perform, display or sell this
13 software and/or its documentation for any purpose is prohibited
14 without the express written consent of Texas Instruments, Inc.
15 **************************************************************************************************/
16
17
18
19 /* ------------------------------------------------------------------------------------------------
20 * Includes
21 * ------------------------------------------------------------------------------------------------
22 */
23
24 /* hal */
25 #include "hal_types.h"
26
27 /* low-level specific */
28 #include "mac_mem.h"
29
30 /* target specific */
31 #include "hal_mcu.h"
\ In segment SFR_AN, at 0xd9
\ unsigned char volatile __sfr RFD
\ RFD:
\ 000000 DS 1
32
33 /* debug */
34 #include "mac_assert.h"
35
36
37 /**************************************************************************************************
38 * @fn macMemReadRamByte
39 *
40 * @brief Read a byte from RAM.
41 *
42 * @param pRam - pointer to byte RAM byte to read
43 *
44 * @return byte read from RAM
45 **************************************************************************************************
46 */
\ In segment BANKED_CODE, align 1, keep-with-next
47 uint8 macMemReadRamByte(macRam_t * pRam)
\ macMemReadRamByte:
48 {
\ 000000 C082 PUSH DPL
\ 000002 C083 PUSH DPH
\ 000004 ; Saved register size: 2
\ 000004 ; Auto size: 0
49 return(*pRam);
\ 000004 8A82 MOV DPL,R2
\ 000006 8B83 MOV DPH,R3
\ 000008 E0 MOVX A,@DPTR
\ 000009 F9 MOV R1,A
\ 00000A D083 POP DPH
\ 00000C D082 POP DPL
\ 00000E 02.... LJMP ?BRET
50 }
51
52
53 /**************************************************************************************************
54 * @fn macMemWriteRam
55 *
56 * @brief Write multiple bytes to RAM.
57 *
58 * @param pRam - pointer to RAM to be written to
59 * @param pData - pointer to data to write
60 * @param len - number of bytes to write
61 *
62 * @return none
63 **************************************************************************************************
64 */
\ In segment BANKED_CODE, align 1, keep-with-next
65 void macMemWriteRam(macRam_t * pRam, uint8 * pData, uint8 len)
\ macMemWriteRam:
66 {
\ 000000 74F7 MOV A,#-0x9
\ 000002 12.... LCALL ?BANKED_ENTER_XDATA
\ 000005 ; Saved register size: 9
\ 000005 ; Auto size: 0
\ 000005 8019 SJMP ??macMemWriteRam_0
67 while (len)
68 {
69 len--;
\ ??macMemWriteRam_1:
\ 000007 19 DEC R1
70 *pRam = *pData;
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -