north:~# TESTNAME=x509-pluto-05north:~# ipsec setup startipsec_setup: Starting Openswan IPsec VERSIONnorth:~# /testing/pluto/bin/wait-until-pluto-startednorth:~# ipsec auto --add north-east-x509-pluto-02north:~# echo donedonenorth:~# ipsec auto --up north-east-x509-pluto-02104 "north-east-x509-pluto-02" #1: STATE_MAIN_I1: initiate003 "north-east-x509-pluto-02" #1: received Vendor ID payload [Openswan 003 "north-east-x509-pluto-02" #1: received Vendor ID payload [Dead Peer Detection]106 "north-east-x509-pluto-02" #1: STATE_MAIN_I2: sent MI2, expecting MR2108 "north-east-x509-pluto-02" #1: STATE_MAIN_I3: sent MI3, expecting MR3004 "north-east-x509-pluto-02" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_RSA_SIG cipher=oakley_3des_cbc_192 prf=oakley_md5 group=modp1536}117 "north-east-x509-pluto-02" #2: STATE_QUICK_I1: initiate004 "north-east-x509-pluto-02" #2: STATE_QUICK_I2: sent QI2, IPsec SA establishednorth:~# north:~#north:~# ipsec setup stopIPSEC EVENT: KLIPS device ipsec0 shut down.ipsec_setup: Stopping Openswan IPsec...north:~# kill `cat /var/run/klogd.pid`; cat /tmp/klog.logklogd 1.3-3#33.1, log source = /proc/kmsg started.north:~# halt -p -fPower down.