compiling WM_GetId.c...
compiling WM_GetInsideRect.c...
compiling WM_GetInsideRectExScrollbar.c...
compiling WM_GetInvalidRect.c...
compiling WM_GetNextSibling.c...
compiling WM_GetOrg.c...
compiling WM_GetParent.c...
compiling WM_GetPrevSibling.c...
compiling WM_GetScrollbar.c...
compiling WM_GetScrollPartner.c...
compiling WM_GetScrollState.c...
compiling WM_GetWindowRect.c...
compiling WM_GetWindowSize.c...
compiling WM_HasCaptured.c...
compiling WM_HasFocus.c...
compiling WM_Hide.c...
compiling WM_IsCompletelyVisible.c...
compiling WM_IsEnabled.c...
compiling WM_IsFocussable.c...
compiling WM_IsVisible.c...
compiling WM_IsWindow.c...
compiling WM_MakeModal.c...
compiling WM_Move.c...
compiling WM_MoveChildTo.c...
compiling WM_NotifyParent.c...
compiling WM_OnKey.c...
compiling WM_Paint.c...
compiling WM_PID__GetPrevState.c...
compiling WM_ResizeWindow.c...
compiling WM_Screen2Win.c...
compiling WM_SendMessageNoPara.c...
compiling WM_SendToParent.c...
compiling WM_SetAnchor.c...
compiling WM_SetCallback.c...
compiling WM_SetCapture.c...
compiling WM_SetCaptureMove.c...
compiling WM_SetCreateFlags.c...
compiling WM_SetDesktopColor.c...
compiling WM_SetFocus.c...
compiling WM_SetFocusOnNextChild.c...
compiling WM_SetFocusOnPrevChild.c...
compiling WM_SetId.c...
compiling WM_SetpfPollPID.c...
compiling WM_SetScrollbar.c...
compiling WM_SetScrollState.c...
compiling WM_SetSize.c...
compiling WM_SetTrans.c...
compiling WM_SetTransState.c...
compiling WM_SetUserClipRect.c...
compiling WM_SetXSize.c...
compiling WM_SetYSize.c...
compiling WM_Show.c...
compiling WM_StayOnTop.c...
compiling WM_Timer.c...
compiling WM_TimerExternal.c...
compiling WM_UserData.c...
compiling WM_Validate.c...
compiling WM_ValidateWindow.c...
compiling WMMemDev.c...
compiling WMTouch.c...
compiling LCD.c...
compiling LCDDummy.c...
..\..\..\..\..\GUI\LCDDriver\LCDDummy.c(554): warning:  #177-D: variable "xPhys" was declared but never referenced
..\..\..\..\..\GUI\LCDDriver\LCDDummy.c(555): warning:  #177-D: variable "yPhys" was declared but never referenced
compiling GUI_X_uCOS.c...
compiling GUIDEMO.c...
compiling GUIDEMO_Automotive.c...
compiling GUIDEMO_Bitmap4bpp.c...
compiling GUIDEMO_Bitmap.c...
compiling GUIDEMO_Circle.c...
compiling GUIDEMO_ColorBar.c...
compiling GUIDEMO_ColorList.c...
compiling GUIDEMO_Cursor.c...
compiling GUIDEMO_Dialog.c...
compiling GUIDEMO_Font.c...
compiling GUIDEMO_FrameWin.c...
compiling GUIDEMO_Graph.c...
compiling GUIDEMO_HardwareInfo.c...
compiling GUIDEMO_Intro.c...
compiling GUIDEMO_LUT.c...
compiling GUIDEMO_MemDevB.c...
compiling GUIDEMO_Messagebox.c...
compiling GUIDEMO_Navi.c...
compiling GUIDEMO_Polygon.c...
compiling GUIDEMO_ProgBar.c...
compiling GUIDEMO_Speed.c...
compiling GUIDEMO_Touch.c...
compiling MicriumLogo.c...
compiling MicriumLogoWRed.c...
compiling SeggerLogoBlue.c...
linking...
Program Size: Code=127196 RO-data=106060 RW-data=684 ZI-data=25192  
FromELF: creating hex file...
".\rvmdk\MCB2300-OS-View-LCD.axf" - 0 Error(s), 11 Warning(s).
Build target 'Flash'
linking...
Program Size: Code=127196 RO-data=106060 RW-data=684 ZI-data=25192  
FromELF: creating hex file...
".\rvmdk\MCB2300-OS-View-LCD.axf" - 0 Error(s), 0 Warning(s).
Load "F:\\MCB2300_ucgui_LCD320240\\Micrium\\Software\\EvalBoards\\NXP\\MCB2300\\RVMDK\\OS-View-LCD\\rvmdk\\MCB2300-OS-View-LCD.AXF" 
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Info: Halting CPU core
DLL version V4.00a, compiled Dec 17 2008 20:31:13
Firmware: J-Link compiled Jul 30 2008 11:24:37 ARM Rev.5
Hardware: V5.30
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x4F1F0F0F
ARM7 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Using adaptive clocking instead of fixed JTAG speed.
Full Chip Erase Done.
Programming Done.
Build target 'Flash'
compiling bsp.c...
..\BSP\bsp.c(422): warning:  #550-D: variable "sp" was set but never used
..\BSP\bsp.c(1304): warning:  #61-D: integer operation result is out of range
..\BSP\bsp.c(1260): warning:  #177-D: variable "value" was declared but never referenced
linking...
Program Size: Code=127180 RO-data=106060 RW-data=684 ZI-data=25192  
FromELF: creating hex file...
".\rvmdk\MCB2300-OS-View-LCD.axf" - 0 Error(s), 3 Warning(s).
Load "F:\\MCB2300_ucgui_LCD320240\\Micrium\\Software\\EvalBoards\\NXP\\MCB2300\\RVMDK\\OS-View-LCD\\rvmdk\\MCB2300-OS-View-LCD.AXF" 
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Info: Halting CPU core
DLL version V4.00a, compiled Dec 17 2008 20:31:13
Firmware: J-Link compiled Jul 30 2008 11:24:37 ARM Rev.5
Hardware: V5.30
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x4F1F0F0F
ARM7 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Using adaptive clocking instead of fixed JTAG speed.
Full Chip Erase Done.
Programming Done.
Build target 'Flash'
compiling LCDDummy.c...
..\..\..\..\..\GUI\LCDDriver\LCDDummy.c(618): warning:  #177-D: variable "xPhys" was declared but never referenced
..\..\..\..\..\GUI\LCDDriver\LCDDummy.c(619): warning:  #177-D: variable "yPhys" was declared but never referenced
linking...
Program Size: Code=127156 RO-data=106060 RW-data=684 ZI-data=25192  
FromELF: creating hex file...
".\rvmdk\MCB2300-OS-View-LCD.axf" - 0 Error(s), 2 Warning(s).
Load "F:\\MCB2300_ucgui_LCD320240\\Micrium\\Software\\EvalBoards\\NXP\\MCB2300\\RVMDK\\OS-View-LCD\\rvmdk\\MCB2300-OS-View-LCD.AXF" 
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Info: Halting CPU core
DLL version V4.00a, compiled Dec 17 2008 20:31:13
Firmware: J-Link compiled Jul 30 2008 11:24:37 ARM Rev.5
Hardware: V5.30
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x4F1F0F0F
ARM7 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Using adaptive clocking instead of fixed JTAG speed.
Full Chip Erase Done.
Programming Done.
Build target 'Flash'
compiling bsp.c...
..\BSP\bsp.c(422): warning:  #550-D: variable "sp" was set but never used
..\BSP\bsp.c(1304): warning:  #61-D: integer operation result is out of range
..\BSP\bsp.c(1260): warning:  #177-D: variable "value" was declared but never referenced
linking...
Program Size: Code=127172 RO-data=106060 RW-data=684 ZI-data=25192  
FromELF: creating hex file...
".\rvmdk\MCB2300-OS-View-LCD.axf" - 0 Error(s), 3 Warning(s).
Load "F:\\MCB2300_ucgui_LCD320240\\Micrium\\Software\\EvalBoards\\NXP\\MCB2300\\RVMDK\\OS-View-LCD\\rvmdk\\MCB2300-OS-View-LCD.AXF" 
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Info: Halting CPU core
DLL version V4.00a, compiled Dec 17 2008 20:31:13
Firmware: J-Link compiled Jul 30 2008 11:24:37 ARM Rev.5
Hardware: V5.30
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x4F1F0F0F
ARM7 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Using adaptive clocking instead of fixed JTAG speed.
Full Chip Erase Done.
Programming Done.
Build target 'Flash'
compiling bsp.c...
..\BSP\bsp.c(422): warning:  #550-D: variable "sp" was set but never used
..\BSP\bsp.c(1303): warning:  #61-D: integer operation result is out of range
..\BSP\bsp.c(1259): warning:  #177-D: variable "value" was declared but never referenced
linking...
Program Size: Code=127168 RO-data=106056 RW-data=684 ZI-data=25192  
FromELF: creating hex file...
".\rvmdk\MCB2300-OS-View-LCD.axf" - 0 Error(s), 3 Warning(s).
Load "F:\\MCB2300_ucgui_LCD320240\\Micrium\\Software\\EvalBoards\\NXP\\MCB2300\\RVMDK\\OS-View-LCD\\rvmdk\\MCB2300-OS-View-LCD.AXF" 
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Info: Halting CPU core
DLL version V4.00a, compiled Dec 17 2008 20:31:13
Firmware: J-Link compiled Jul 30 2008 11:24:37 ARM Rev.5
Hardware: V5.30
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x4F1F0F0F
ARM7 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Using adaptive clocking instead of fixed JTAG speed.
Full Chip Erase Done.
Programming Done.
Build target 'Flash'
compiling bsp.c...
..\BSP\bsp.c(422): warning:  #550-D: variable "sp" was set but never used
..\BSP\bsp.c(1303): warning:  #61-D: integer operation result is out of range
..\BSP\bsp.c(1259): warning:  #177-D: variable "value" was declared but never referenced
linking...
Program Size: Code=127172 RO-data=106060 RW-data=684 ZI-data=25192  
FromELF: creating hex file...
".\rvmdk\MCB2300-OS-View-LCD.axf" - 0 Error(s), 3 Warning(s).
Build target 'Flash'
linking...
Program Size: Code=127172 RO-data=106060 RW-data=684 ZI-data=25192  
FromELF: creating hex file...
".\rvmdk\MCB2300-OS-View-LCD.axf" - 0 Error(s), 0 Warning(s).
Load "F:\\MCB2300_ucgui_LCD320240\\Micrium\\Software\\EvalBoards\\NXP\\MCB2300\\RVMDK\\OS-View-LCD\\rvmdk\\MCB2300-OS-View-LCD.AXF" 
Load "F:\\MCB2300_ucgui_LCD320240\\Micrium\\Software\\EvalBoards\\NXP\\MCB2300\\RVMDK\\OS-View-LCD\\rvmdk\\MCB2300-OS-View-LCD.AXF" 
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Info: Halting CPU core
DLL version V4.00a, compiled Dec 17 2008 20:31:13
Firmware: J-Link compiled Jul 30 2008 11:24:37 ARM Rev.5
Hardware: V5.30
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x4F1F0F0F
ARM7 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Using adaptive clocking instead of fixed JTAG speed.
Full Chip Erase Done.
Programming Done.
Build target 'Flash'
compiling app.c...
app.c(109): warning:  #177-D: variable "err" was declared but never referenced
app.c(187): warning:  #177-D: variable "ver" was declared but never referenced
app.c(189): warning:  #177-D: variable "err" was declared but never referenced
linking...
Program Size: Code=127172 RO-data=106060 RW-data=684 ZI-data=25192  
FromELF: creating hex file...
".\rvmdk\MCB2300-OS-View-LCD.axf" - 0 Error(s), 3 Warning(s).
Load "F:\\MCB2300_ucgui_LCD320240\\Micrium\\Software\\EvalBoards\\NXP\\MCB2300\\RVMDK\\OS-View-LCD\\rvmdk\\MCB2300-OS-View-LCD.AXF" 
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Info: Halting CPU core
DLL version V4.00a, compiled Dec 17 2008 20:31:13
Firmware: J-Link compiled Jul 30 2008 11:24:37 ARM Rev.5
Hardware: V5.30
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x4F1F0F0F
ARM7 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Using adaptive clocking instead of fixed JTAG speed.
Full Chip Erase Done.
Programming Done.
Load "F:\\MCB2300_ucgui_LCD320240\\Micrium\\Software\\EvalBoards\\NXP\\MCB2300\\RVMDK\\OS-View-LCD\\rvmdk\\MCB2300-OS-View-LCD.AXF" 
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Info: Halting CPU core
DLL version V4.00a, compiled Dec 17 2008 20:31:13
Firmware: J-Link compiled Jul 30 2008 11:24:37 ARM Rev.5
Hardware: V5.30
Hardware-Breakpoints: 2
Software-Breakpoints: 2048
Watchpoints:          0
Found 1 JTAG device, Total IRLen = 4:
 Id of device #0: 0x4F1F0F0F
ARM7 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 4, IRPrint = 0x01
Info: TotalIRLen = 4, IRPrint = 0x01
Using adaptive clocking instead of fixed JTAG speed.
Full Chip Erase Done.
Programming Done.
Build target 'Flash'
compiling app.c...
app.c(109): warning:  #177-D: variable "err" was declared but never referenced
app.c(187): warning:  #177-D: variable "ver" was declared but never referenced
app.c(189): warning:  #177-D: variable "err" was declared but never referenced
linking...
Program Size: Code=127172 RO-data=106060 RW-data=684 ZI-data=25192  
FromELF: creating hex file...
".\rvmdk\MCB2300-OS-View-LCD.axf" - 0 Error(s), 3 Warning(s).
Build target 'Flash'
compiling TFT.c...
linking...
Program Size: Code=127172 RO-data=106060 RW-data=684 ZI-data=25192  
FromELF: creating hex file...
".\rvmdk\MCB2300-OS-View-LCD.axf" - 0 Error(s), 0 Warning(s).
Clean started: Project: 'MCB2300-OS-View-LCD'
   deleting intermediate output files for target 'Flash'