/**************************************************************************** Description     : LCD module export interface* HW-Environment  : AVR MCU ATMega162-10MHz*                   PCB eOscope v1.0*                   XC9500 firmware v1.1* SW-Environment  : AVR-GCC 3.4.3, Anjuta 1.2.1, AVR-INSIGHT, Avarice							* Author          : Daniel Ciocea* Revision        : 1.0 Initial version****************************************************************************//* LCD Pins and Ports */#define LCD_u8CtrlPort          PORTE            /* PORT for LCD control signals */#define LCD_u8CtrlDdr           DDRE             /* DDR register of LCD control port */#define LCD_nCtrlRW             PORTE2           /* pin for LCD Register Select */#define LCD_nCtrlRS             PORTE1           /* pin for LCD Read/Write */#define LCD_nCtrlE              PORTE0           /* pin for LCD Enable */#define LCD_nCtrlRESET          PORTC3           /* pin for LCD Reset */#define LCD_u8CtrlPortRESET     PORTC            /* port for LCD Reset */#define LCD_u8CtrlDdrRESET      DDRC             /* DDR register of LCD Reset */#define LCD_u8CtrlPinRESET      DDRC             /* PIN register of LCD Reset (usually not needed for RESET :)) */#define LCD_u8DataPort          PORTA            /* PORT for LCD data signals */#define LCD_u8DataDdr           DDRA             /* DDR register of LCD data port */#define LCD_u8DataPin           PINA             /* PIN register of LCD data */#define LCD_nBusyFlag           PINA7            /* LCD Busy Flag Pin *//* LCD commands */#define LCD_nSetLcdMode         0x00#define LCD_nSetChPitch         0x01#define LCD_nSetCharNum         0x02#define LCD_nSetTimeDivs        0x03#define LCD_nSetCurPos          0x04#define LCD_nSetHomLAddr        0x08#define LCD_nSetHomHAddr        0x09#define LCD_nSetCurLAddr        0x0a#define LCD_nSetCurHAddr        0x0b#define LCD_nWriteData          0x0c#define LCD_nReadData           0x0d#define LCD_nClearBit           0x0e#define LCD_nSetBit             0x0f/* Export functions */void LCD_vInitScreen (void);void LCD_vClearScreen (void);void LCD_vPrintSignalFrame (void);void LCD_vPrintTrigger(uint8_t u8TrigLev);void LCD_vPrintSignal (void);void LCD_vPrintString (void);void LCD_vPrintText (uint8_t Valoare);void LCD_vPrintLogo (void);