## Input core configuration#menuconfig INPUT_KEYBOARD	bool "Keyboards" if EMBEDDED || !X86	default y	help	  Say Y here, and a list of supported keyboards will be displayed.	  This option doesn't affect the kernel.	  If unsure, say Y.if INPUT_KEYBOARDconfig KEYBOARD_ATKBD	tristate "AT keyboard" if !PC	default n	select SERIO	select SERIO_LIBPS2	select SERIO_I8042 if PC	select SERIO_GSCPS2 if GSC	help	  Say Y here if you want to use a standard AT or PS/2 keyboard. Usually	  you'll need this, unless you have a different type keyboard (USB, ADB	  or other). This also works for AT and PS/2 keyboards connected over a	  PS/2 to serial converter.	  If unsure, say Y.	  To compile this driver as a module, choose M here: the	  module will be called atkbd.config KEYBOARD_ATKBD_HP_KEYCODES	bool "Use HP keyboard scancodes"	depends on PARISC && KEYBOARD_ATKBD	default y	help	  Say Y here if you have a PA-RISC machine and want to use an AT or	  PS/2 keyboard, and your keyboard uses keycodes that are specific to	  PA-RISC keyboards.	  Say N if you use a standard keyboard.config KEYBOARD_ATKBD_RDI_KEYCODES	bool "Use PrecisionBook keyboard scancodes"	depends on KEYBOARD_ATKBD_HP_KEYCODES	default n	help	  If you have an RDI PrecisionBook, say Y here if you want to use its	  built-in keyboard (as opposed to an external keyboard).	  The PrecisionBook has five keys that conflict with those used by most	  AT and PS/2 keyboards. These are as follows:	    PrecisionBook    Standard AT or PS/2	    F1               F12	    Left Ctrl        Left Alt	    Caps Lock        Left Ctrl	    Right Ctrl       Caps Lock	    Left             102nd key (the key to the right of Left Shift)	  If you say N here, and use the PrecisionBook keyboard, then each key	  in the left-hand column will be interpreted as the corresponding key	  in the right-hand column.	  If you say Y here, and use an external keyboard, then each key in the	  right-hand column will be interpreted as the key shown in the	  left-hand column.config KEYBOARD_SUNKBD	tristate "Sun Type 4 and Type 5 keyboard"	select SERIO	help	  Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,	  connected either to the Sun keyboard connector or to an serial	  (RS-232) port via a simple adapter.	  To compile this driver as a module, choose M here: the	  module will be called sunkbd.config KEYBOARD_LKKBD	tristate "DECstation/VAXstation LK201/LK401 keyboard"	select SERIO	help	  Say Y here if you want to use a LK201 or LK401 style serial	  keyboard. This keyboard is also useable on PCs if you attach	  it with the inputattach program. The connector pinout is	  described within lkkbd.c.	  To compile this driver as a module, choose M here: the	  module will be called lkkbd.config KEYBOARD_LOCOMO	tristate "LoCoMo Keyboard Support"	depends on SHARP_LOCOMO	help	  Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA	  To compile this driver as a module, choose M here: the	  module will be called locomokbd.config KEYBOARD_XTKBD	tristate "XT keyboard"	select SERIO	help	  Say Y here if you want to use the old IBM PC/XT keyboard (or	  compatible) on your system. This is only possible with a	  parallel port keyboard adapter, you cannot connect it to the	  keyboard port on a PC that runs Linux.	  To compile this driver as a module, choose M here: the	  module will be called xtkbd.config KEYBOARD_NEWTON	tristate "Newton keyboard"	select SERIO	help	  Say Y here if you have a Newton keyboard on a serial port.	  To compile this driver as a module, choose M here: the	  module will be called newtonkbd.config KEYBOARD_CORGI	tristate "Corgi keyboard"	depends on PXA_SHARPSL	default y		help	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx 	  series of PDAs.	  To compile this driver as a module, choose M here: the 	  module will be called corgikbd.config KEYBOARD_MAPLE	tristate "Maple bus keyboard"	depends on SH_DREAMCAST && MAPLE	help	  Say Y here if you have a DreamCast console running Linux and have	  a keyboard attached to its Maple bus.	  To compile this driver as a module, choose M here: the	  module will be called maple_keyb.config KEYBOARD_AMIGA	tristate "Amiga keyboard"	depends on AMIGA	help	  Say Y here if you are running Linux on any AMIGA and have a keyboard	  attached.	  To compile this driver as a module, choose M here: the	  module will be called amikbd.config KEYBOARD_HIL_OLD	tristate "HP HIL keyboard support (simple driver)"	depends on GSC	default y	help	  The "Human Interface Loop" is a older, 8-channel USB-like	  controller used in several Hewlett Packard models. This driver	  was adapted from the one written for m68k/hp300, and implements	  support for a keyboard attached to the HIL port, but not for	  any other types of HIL input devices like mice or tablets.	  However, it has been thoroughly tested and is stable.	  If you want full HIL support including support for multiple	  keyboards, mices and tablets, you have to enable the	  "HP System Device Controller i8042 Support" in the input/serio	  submenu.config KEYBOARD_HIL	tristate "HP HIL keyboard support"	depends on GSC	default y	select HP_SDC	select HIL_MLC	select SERIO	help	  The "Human Interface Loop" is a older, 8-channel USB-like	  controller used in several Hewlett Packard models.	  This driver implements support for HIL-keyboards attached	  to your machine, so normally you should say Y here.config SBC2440_BUTTONS        tristate "SBC2440 buttons"        depends on ARCH_SBC2440        default y        help                                                                                                                       To compile this driver as a module, choose M here: the          module will be called sbc2440_buttons.ko.config QQ2440_BUTTONS        tristate "QQ2440 buttons for Qtopia"        depends on ARCH_SBC2440        default y        help                                                                                                                       To compile this driver as a module, choose M here: the          module will be called qq2440_buttons.ko.endif