//note:如果您使用C語言編寫LCD的底層接口程序的話，這里的定義才會有用
// this file for MCU I/O port or the orther`s hardware config 
// for LCD Display 
#ifndef __LCD_PORTCONFIG_H__
#define	__LCD_PORTCONFIG_H__
#include "LPC22XX.h"
//#include "intrins.h"			//包含此頭文件可直接操作內核的寄存器以及一些定義好的宏

#define LCD_Ctrl_GPIO()		PINSEL1 &= ~(0x0fff0000)
#define LCD_Ctrl_Out()		IODIR0 |= (LCD_CS+LCD_RE+LCD_A0+LCD_RW+LCD_RD)
#define LCD_Ctrl_Set(n)		IOSET0 = n
#define LCD_Ctrl_Clr(n)		IOCLR0 = n

#define LCD_CS				(0x01<<29)
#define LCD_CS_SET()		IOSET0 = LCD_CS
#define LCD_CS_CLR()		IOCLR0 = LCD_CS

#define LCD_RE				(0x01<<24)
#define LCD_RE_SET()		IOSET0 = LCD_RE
#define LCD_RE_CLR()		IOCLR0 = LCD_RE

#define LCD_A0				(0x01<<25)
#define LCD_A0_SET()		IOSET0 = LCD_A0
#define LCD_A0_CLR()		IOCLR0 = LCD_A0

#define LCD_RW				(0x01<<27)
#define LCD_RW_SET()		IOSET0 = LCD_RW
#define LCD_RW_CLR()		IOCLR0 = LCD_RW

#define LCD_RD				(0x01<<28)
#define LCD_RD_SET()		IOSET0 = LCD_RD
#define LCD_RD_CLR()		IOCLR0 = LCD_RD

#define LCD_Data_GPIO()		PINSEL1 &= ~(0x0000ffff)		
#define LCD_Data_Out()		IODIR0 |= (0xff<<16)
#define LCD_Data_In()		IODIR0 &= ~(0xff<<16)
#define LCD_Data_BUS_Clr()	IOCLR0 = (0xff<<16)
#define LCD_Data_BUS_Set(n)	IOSET0 = (n<<16)
#define LCD_Data_Read()		((IOPIN0&(0xff<<16))>>16)

#define LCD_Data_BUS_Byte	2
//定義8位的數據線占用端口的哪些位置，0: Port0~Port7
//									 1: Port8~Port15
//									 2: Port16~Port23
//									 3: Port24~Port31	 

/*
#define	LCD_DAT_W		(*((volatile unsigned char *)0x82600000))
#define LCD_DAT_R		(*((volatile unsigned char *)0x82600000))
#define LCD_COM_W		(*((volatile unsigned char *)0x82400000))
#define LCD_COM_R		(*((volatile unsigned char *)0x82400000))

#define LCD_RE				(0x01<<24)
#define LCD_RE_SET()		IOSET1 = LCD_RE
#define LCD_RE_CLR()		IOCLR1 = LCD_RE

#define LCD_Ctrl_GPIO()		IODIR1 |= LCD_RE; IOSET1 = LCD_RE;
//========================================================================
// 函數: void LCD_DataWrite(unsigned int Data)
// 描述: 寫一個字(16bit)的顯示數據至LCD中的顯示緩沖RAM當中
// 參數: Data 寫入的數據 
// 返回: 無
// 備注: 無
// 版本:
//      2007/03/15      First version
//========================================================================
#define LCD_DataWrite(nW)	LCD_DAT_W = (unsigned char)(nW>>8);\
							LCD_DAT_W = (unsigned char)nW	 */
//========================================================================
// 函數: void LCD_RegWrite(unsigned char Addr,unsigned int Command)
// 描述: 寫一個字節的數據至LCD中的控制寄存器當中
// 參數: Addr			要寫入的寄存器的地址，低八位有效（byte）
//		Command			寫入的數據 
// 返回: 無
// 備注: 
// 版本:
//      2007/03/15      First version
//========================================================================
#define LCD_RegWrite(n)		LCD_Ctrl_Clr(LCD_A0|LCD_CS);LCD_RW_CLR();LCD_RW_SET();LCD_Data_BUS_Clr();LCD_Data_BUS_Set(n);\
							LCD_RW_CLR();LCD_RW_SET();LCD_CS_SET()

#define LCD_DataWrite(n) 	LCD_Ctrl_Set(LCD_A0+LCD_RD);LCD_CS_CLR();LCD_Data_BUS_Clr();LCD_Data_BUS_Set((unsigned char)(n>>8));\
							LCD_RW_CLR();LCD_RW_SET();LCD_Data_BUS_Clr();LCD_Data_BUS_Set((unsigned char)n);LCD_RW_CLR();\
							LCD_RW_SET();LCD_CS_SET()				 

#endif