?? hardware.lst
字號(hào):
Sunplus u'nSP Assembler - Ver. 1.14.3.1
Listing File Has Been Relocated
//========================================================================================
// Progarm: Standard function definition
// Writen by: Andy
//
// Lastest modified date:
// 2000/06/23: first version
// 2000/07/15: modified
// 2000/07/24: modified for sacmv25.lib
// 2001/10/03: Add more public about queue for sacmv25f.lib
// 2001/11/05: Independent Queue for A2000/S480/MS01 Manual Mode - sacmv25h.lib
// 2001/11/06: Fix volume parameter problem - sacmv25i.lib
//
// For: sacmV25n.lib
//
// Note:
// 1. Don't change this file if possible.
// 2. Update hardware.inc with hardware.asm synchorously
// 3. Provide Open code for sacmVxx.lib
//
//========================================================================================
.PUBLIC F_SP_RampUpDAC1
.PUBLIC F_SP_RampDnDAC1
.PUBLIC F_SP_RampUpDAC2
.PUBLIC F_SP_RampDnDAC2
.PUBLIC _SP_RampUpDAC1
.PUBLIC _SP_RampDnDAC1
.PUBLIC _SP_RampUpDAC2
.PUBLIC _SP_RampDnDAC2
.PUBLIC _SP_InitQueue
.PUBLIC _SP_InitQueue_A2000
.PUBLIC _SP_InitQueue_S480
.PUBLIC _SP_InitQueue_S240
.PUBLIC _SP_InitQueue_MS01
.PUBLIC _SP_InitQueue_DVR
.PUBLIC F_SP_InitQueue
.PUBLIC F_SP_InitQueue_A2000
.PUBLIC F_SP_InitQueue_S480
.PUBLIC F_SP_InitQueue_S240
.PUBLIC F_SP_InitQueue_MS01
.PUBLIC F_SP_InitQueue_DVR
.PUBLIC F_SP_ReadQueue
.PUBLIC F_SP_ReadQueue_A2000
.PUBLIC F_SP_ReadQueue_S480
.PUBLIC F_SP_ReadQueue_S240
.PUBLIC F_SP_ReadQueue_MS01
.PUBLIC F_SP_ReadQueue_DVR
.PUBLIC F_SP_ReadQueue_NIC // Read Queue with no index change
.PUBLIC F_SP_ReadQueue_NIC_A2000
.PUBLIC F_SP_ReadQueue_NIC_S480
.PUBLIC F_SP_ReadQueue_NIC_S240
.PUBLIC F_SP_ReadQueue_NIC_MS01
.PUBLIC F_SP_ReadQueue_NIC_DVR
.PUBLIC F_SP_WriteQueue
.PUBLIC F_SP_WriteQueue_A2000
.PUBLIC F_SP_WriteQueue_S480
.PUBLIC F_SP_WriteQueue_S240
.PUBLIC F_SP_WriteQueue_MS01
.PUBLIC F_SP_WriteQueue_DVR
.PUBLIC F_SP_TestQueue
.PUBLIC F_SP_TestQueue_A2000
.PUBLIC F_SP_TestQueue_S480
.PUBLIC F_SP_TestQueue_S240
.PUBLIC F_SP_TestQueue_MS01
.PUBLIC F_SP_TestQueue_DVR
.PUBLIC _SP_Export
.PUBLIC _SP_Import
.PUBLIC _SP_Init_IOB
.PUBLIC _SP_Init_IOA
.PUBLIC _SP_GetResource
.PUBLIC F_SP_GetResource
.PUBLIC F_SP_SACM_A2000_Init_
.PUBLIC F_SP_SACM_S480_Init_
.PUBLIC F_SP_SACM_S240_Init_
.PUBLIC F_SP_SACM_MS01_Init_
.PUBLIC F_SP_PlayMode0_
.PUBLIC F_SP_PlayMode1_
.PUBLIC F_SP_PlayMode2_
.PUBLIC F_SP_PlayMode3_
.PUBLIC F_SP_SACM_DVR_Init_
.PUBLIC F_SP_SACM_DVR_Rec_Init_
.PUBLIC F_SP_SACM_DVR_Play_Init_
.PUBLIC R_InterruptStatus
.PUBLIC F_RampUpDAC1
.PUBLIC F_RampDnDAC1
.PUBLIC F_RampUpDAC2
.PUBLIC F_RampDnDAC2
.PUBLIC _STD_RampUpDAC1
.PUBLIC _STD_RampDnDAC1
.PUBLIC _STD_RampUpDAC2
.PUBLIC _STD_RampDnDAC2
//////////////////////////////////////////////////////////////////
// Definitions for I/O Port
//////////////////////////////////////////////////////////////////
.DEFINE P_IOA_Data 0x7000 // Write Data into data register and read from IOA pad
.DEFINE P_IOA_Buffer 0x7001 // Write Data into buffer register and read from buffer register
.DEFINE P_IOA_Dir 0x7002 // Direction vector for IOA
.DEFINE P_IOA_Attrib 0x7003 // Attribute vector for IOA
.DEFINE P_IOA_Latch 0x7004 // Latch PortA data for key change wake-up
.DEFINE P_IOB_Data 0x7005 // Write Data into the data register and read from IOB pad
.DEFINE P_IOB_Buffer 0x7006 // Write Data into buffer register and read from buffer register
.DEFINE P_IOB_Dir 0x7007 // Direction vector for IOB
.DEFINE P_IOB_Attrib 0x7008 // Attribute vector for IOB
.DEFINE P_FeedBack 0x7009 // Clock form external R,C
.DEFINE P_TimerA_Data 0x700A // Data port for TimerA
.DEFINE P_TimerA_Ctrl 0x700B // Control Port for TimerA
.DEFINE P_TimerB_Data 0x700C // Data port for TimerB
.DEFINE P_TimerB_Ctrl 0x700D // Control Port for TimerB
.DEFINE P_TimeBase_Setup 0x700E // TimerBase Freq. Set
.DEFINE P_TimeBase_Clear 0x700F // Reset Timerbase counter
.DEFINE P_INT_Ctrl 0x7010 // Control port for interrupt source
.DEFINE P_INT_Clear 0x7011 // Clear interrupt source
.DEFINE P_Watchdog_Clear 0x7012 // Watchdog Reset
.DEFINE P_SystemClock 0x7013 // Change system clock frequency(include go to standby mode)
//... PA6442 New version MC52A (For EC-03)....
.DEFINE P_ADC 0x7014 // Data Port for AD
.DEFINE P_ADC_Ctrl 0x7015 // Control Port for AD control
.DEFINE P_ADC_Status 0x7015 // AD Port Status
.DEFINE P_DAC2 0x7016 // Data Port for DAC2
.DEFINE P_PWM 0x7016 // Data Port for PWM
.DEFINE P_DAC1 0x7017 // Data Port for DAC1
.DEFINE P_DAC_Ctrl 0x702A // Control Port for two DAC and audio output mode
//............................................
.DEFINE P_IR_Ctrl 0x7018 // Control Port for IR
.DEFINE P_LVD_Ctrl 0x7019 // Control Port for LVD
.DEFINE P_SIO_Data 0x701A // Data port for serial IO
.DEFINE P_SIO_Addr_Low 0x701B // Address Port low
.DEFINE P_SIO_Addr_Mid 0x701C // Address Port middle
.DEFINE P_SIO_Addr_High 0x701D // Address Port high
.DEFINE P_SIO_Ctrl 0x701E // Control Port
.DEFINE P_SIO_Start 0x701F // Start port for serial interface
.DEFINE P_SIO_Stop 0x7020 // Stop port for serial interface
.DEFINE P_UART_Command1 0x7021 // Command1 Port for UART
.DEFINE P_UART_Command2 0x7022 // Command2 Port for UART
.DEFINE P_UART_Data 0x7023 // Data Port for UART
.DEFINE P_UART_BaudScalarLow 0x7024 // Set Baud Rate scalar low
.DEFINE P_UART_BaudScalarHigh 0x7025 // Set Baud Rate scalar high
//... Definitions for P_INT_Ctrl ..............
.DEFINE C_IRQ6_TMB2 0x0001 // Timer B IRQ6
.DEFINE C_IRQ6_TMB1 0x0002 // Timer A IRQ6
.DEFINE C_IRQ5_2Hz 0x0004 // 2Hz IRQ5
.DEFINE C_IRQ5_4Hz 0x0008 // 4Hz IRQ5
.DEFINE C_IRQ4_1KHz 0x0010 // 1024Hz IRQ4
.DEFINE C_IRQ4_2KHz 0x0020 // 2048Hz IRQ4
.DEFINE C_IRQ4_4KHz 0x0040 // 4096Hz IRQ4
.DEFINE C_IRQ3_KEY 0x0080 // Key Change IRQ3
.DEFINE C_IRQ3_EXT1 0x0100 // Ext1 IRQ3
.DEFINE C_IRQ3_EXT2 0x0200 // Ext2 IRQ3
.DEFINE C_IRQ2_TMB 0x0400 // Timer B IRQ2
.DEFINE C_FIQ_TMB 0x0800 // Timer B FIQ
.DEFINE C_IRQ1_TMA 0x1000 // Timer A IRQ1
.DEFINE C_FIQ_TMA 0x2000 // Timer A FIQ
.DEFINE C_IRQ0_PWM 0x4000 // PWM IRQ0
.DEFINE C_FIQ_PWM 0x8000 // PWM FIQ
// Definitions for P_TimerA/B_Ctrl ............
.DEFINE C_Fosc_2 0x0000 //
.DEFINE C_Fosc_256 0x0001 //
.DEFINE C_32768Hz 0x0002 //
.DEFINE C_8192Hz 0x0003 //
.DEFINE C_4096Hz 0x0004 //
.DEFINE C_A1 0x0005 //
.DEFINE C_A0 0x0006 //
.DEFINE C_Ext1 0x0007 //
.DEFINE C_2048Hz 0x0000 //
.DEFINE C_1024Hz 0x0008 //
.DEFINE C_256Hz 0x0010 //
.DEFINE C_TMB1Hz 0x0018 //
.DEFINE C_4Hz 0x0020 //
.DEFINE C_2Hz 0x0028 //
.DEFINE C_B1 0x0030 //
.DEFINE C_Ext2 0x0038 //
.DEFINE C_Off 0x0000 //
.DEFINE C_D1 0x0040 //
.DEFINE C_D2 0x0080 //
.DEFINE C_D3 0x00C0 //
.DEFINE C_D4 0x0100 //
.DEFINE C_D5 0x0140 //
.DEFINE C_D6 0x0180 //
.DEFINE C_D7 0x01C0 //
.DEFINE C_D8 0x0200 //
.DEFINE C_D9 0x0240 //
.DEFINE C_D10 0x0280 //
.DEFINE C_D11 0x02C0 //
.DEFINE C_D12 0x0300 //
.DEFINE C_D13 0x0340 //
.DEFINE C_D14 0x0380 //
.DEFINE C_TA_Div_2 0x03C0 // Timer A
.DEFINE C_TB_Div_2 0x03C0 // Timer B
//... Definition for P_SystemClock ............
.DEFINE C_Fosc 0x0000 // b3..b0
.DEFINE C_Fosc_Div_2 0x0001 //
.DEFINE C_Fosc_Div_4 0x0002 //
.DEFINE C_Fosc_Div_8 0x0003 // (default)
.DEFINE C_Fosc_Div_16 0x0004 //
.DEFINE C_Fosc_Div_32 0x0005 //
.DEFINE C_Fosc_Div_64 0x0006 //
.DEFINE C_Sleep 0x0007 //
.DEFINE C_32K_Work 0x0000 // b4
.DEFINE C_32K_Off 0x0000 //
.DEFINE C_StrongMode 0x0000 // b5
.DEFINE C_AutoMode 0x0000 //
//... Define for P_AD_Ctrl ....................
.DEFINE C_AD 0x0001 //
.DEFINE C_DA 0x0000 //
.DEFINE C_MIC 0x0000 //
.DEFINE C_LINE 0x0002 //
//... Define for P_DA_Ctrl ....................
.DEFINE C_PushPull 0x0000 // b0, (default)
.DEFINE C_DoubleEnd 0x0001 // b0
.DEFINE C_DAC_Mode 0x0000 // b1, (default)
.DEFINE C_PWM_Mode 0x0002 // b1
.DEFINE C_D1_Direct 0x0000 // DAC1 latch
.DEFINE C_D1_LatchA 0x0008 //
.DEFINE C_D1_LatchB 0x0010 //
.DEFINE C_D1_LatchAB 0x0018 //
.DEFINE C_D2_Direct 0x0000 // DAC2 latch
.DEFINE C_D2_LatchA 0x0020 //
.DEFINE C_D2_LatchB 0x0040 //
.DEFINE C_D2_LatchAB 0x00C0 //
//... Define for P_LVD_Ctrl ...................
.DEFINE C_LVD24V 0x0000 // LVD = 2.4V
.DEFINE C_LVD28V 0x0001 // LVD = 2.8V
.DEFINE C_LVD32V 0x0002 // LVD = 3.2V
.DEFINE C_LVD36V 0x0003 // LVD = 3.6V
/////////////////////////////////////////////////////////////////
// Note: This register map to the P_INT_Ctrl(0x7010)
// User's interrupt setting have to combine with this register
// while co-work with SACM library.
//
// See. following function for example:
// F_SP_SACM_A2000_Init_:
// F_SP_SACM_S480_Init_:
// F_SP_SACM_S240_Init_:
// F_SP_SACM_MS01_Init_:
// F_SP_SACM_DVR_Init_:
//////////////////////////////////////////////////
00000001 .IRAM
00000001 00 00 .VAR R_InterruptStatus = 0 //
//////////////////////////////////////////////////
.define C_RampDelayTime 16
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號(hào)
Ctrl + =
減小字號(hào)
Ctrl + -