/* * (C) Copyright 2002 * Adam Kowalczyk, ACK Software Controls Inc. akowalczyk@cogeco.ca * * Some portions taken from 3c59x.c Written 1996-1999 by Donald Becker. * * Outline of the program based on eepro100.c which is * * (C) Copyright 2002 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>#include <malloc.h>#include <net.h>#include <asm/io.h>#include <pci.h>#include "articiaS.h"#include "memio.h"/* 3Com Ethernet PCI definitions*//* #define PCI_VENDOR_ID_3COM		0x10B7 */#define PCI_DEVICE_ID_3COM_3C905C	0x9200/* 3Com Commands, top 5 bits are command and bottom 11 bits are parameters */#define TotalReset		(0<<11)#define SelectWindow		(1<<11)#define StartCoax		(2<<11)#define RxDisable		(3<<11)#define RxEnable		(4<<11)#define RxReset			(5<<11)#define UpStall			(6<<11)#define UpUnstall		(6<<11)+1#define DownStall		(6<<11)+2#define DownUnstall		(6<<11)+3#define RxDiscard		(8<<11)#define TxEnable		(9<<11)#define TxDisable		(10<<11)#define TxReset			(11<<11)#define FakeIntr		(12<<11)#define AckIntr			(13<<11)#define SetIntrEnb		(14<<11)#define SetStatusEnb		(15<<11)#define SetRxFilter		(16<<11)#define SetRxThreshold		(17<<11)#define SetTxThreshold		(18<<11)#define SetTxStart		(19<<11)#define StartDMAUp		(20<<11)#define StartDMADown		(20<<11)+1#define StatsEnable		(21<<11)#define StatsDisable		(22<<11)#define StopCoax		(23<<11)#define SetFilterBit		(25<<11)/* The SetRxFilter command accepts the following classes */#define RxStation		1#define RxMulticast		2#define RxBroadcast		4#define RxProm			8/* 3Com status word defnitions */#define IntLatch		0x0001#define HostError		0x0002#define TxComplete		0x0004#define TxAvailable		0x0008#define RxComplete		0x0010#define RxEarly			0x0020#define IntReq			0x0040#define StatsFull		0x0080#define DMADone			(1<<8)#define DownComplete		(1<<9)#define UpComplete		(1<<10)#define DMAInProgress		(1<<11)			/* DMA controller is still busy.*/#define CmdInProgress		(1<<12)          	/* EL3_CMD is still busy.*//* Polling Registers */#define DnPoll			0x2d#define UpPoll			0x3d/* Register window 0 offets */#define Wn0EepromCmd		10	         	/* Window 0: EEPROM command register. */#define Wn0EepromData		12            		/* Window 0: EEPROM results register. */#define IntrStatus		0x0E	                /* Valid in all windows. *//* Register window 0 EEPROM bits */#define EEPROM_Read		0x80#define EEPROM_WRITE		0x40#define EEPROM_ERASE		0xC0#define EEPROM_EWENB		0x30          		/* Enable erasing/writing for 10 msec. */#define EEPROM_EWDIS		0x00           		/* Disable EWENB before 10 msec timeout. *//* EEPROM locations. */#define PhysAddr01		0#define PhysAddr23		1#define PhysAddr45		2#define ModelID			3#define EtherLink3ID		7#define IFXcvrIO		8#define IRQLine			9#define NodeAddr01		10#define NodeAddr23		11#define NodeAddr45		12#define DriverTune		13#define Checksum		15/* Register window 1 offsets, the window used in normal operation */#define TX_FIFO			0x10#define RX_FIFOa		0x10#define RxErrors		0x14#define RxStatus		0x18#define Timer			0x1A#define TxStatus		0x1B#define TxFree			0x1C			/* Remaining free bytes in Tx buffer. *//* Register Window 2 */#define Wn2_ResetOptions	12/* Register Window 3: MAC/config bits */#define Wn3_Config		0			/* Internal Configuration */#define Wn3_MAC_Ctrl		6#define Wn3_Options		8#define BFEXT(value, offset, bitcount)					\	((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1))#define BFINS(lhs, rhs, offset, bitcount)                                       \	(((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) |			\	(((rhs) & ((1 << (bitcount)) - 1)) << (offset)))#define RAM_SIZE(v)             BFEXT(v, 0, 3)#define RAM_WIDTH(v)		BFEXT(v, 3, 1)#define RAM_SPEED(v) 	   	BFEXT(v, 4, 2)#define ROM_SIZE(v)             BFEXT(v, 6, 2)#define RAM_SPLIT(v)		BFEXT(v, 16, 2)#define XCVR(v)                 BFEXT(v, 20, 4)#define AUTOSELECT(v)		BFEXT(v, 24, 1)/* Register Window 4: Xcvr/media bits */#define Wn4_FIFODiag		4#define Wn4_NetDiag		6#define Wn4_PhysicalMgmt	8#define Wn4_Media		10#define Media_SQE		0x0008		/* Enable SQE error counting for AUI. */#define Media_10TP		0x00C0		/* Enable link beat and jabber for 10baseT. */#define Media_Lnk		0x0080		/* Enable just link beat for 100TX/100FX. */#define Media_LnkBeat		0x0800/* Register Window 7: Bus Master control */#define Wn7_MasterAddr		0#define Wn7_MasterLen		6#define Wn7_MasterStatus	12/* Boomerang bus master control registers. */#define PktStatus		0x20#define DownListPtr		0x24#define FragAddr		0x28#define FragLen			0x2c#define TxFreeThreshold 	0x2f#define UpPktStatus		0x30#define UpListPtr 		0x38/* The Rx and Tx descriptor lists. */#define LAST_FRAG       0x80000000                      /* Last Addr/Len pair in descriptor. */#define DN_COMPLETE     0x00010000                      /* This packet has been downloaded */struct rx_desc_3com {	u32 next;                                       /* Last entry points to 0	   	*/	u32 status;					/* FSH -> Frame Start Header 		*/	u32 addr;                                       /* Up to 63 addr/len pairs possible 	*/	u32 length;                                     /* Set LAST_FRAG to indicate last pair	*/};/* Values for the Rx status entry. */#define RxDComplete		0x00008000#define RxDError		0x4000#define IPChksumErr		(1<<25)#define TCPChksumErr		(1<<26)#define UDPChksumErr		(1<<27)#define IPChksumValid		(1<<29)#define TCPChksumValid		(1<<30)#define UDPChksumValid		(1<<31)struct tx_desc_3com {	u32 next;                                       /* Last entry points to 0		*/	u32 status;                                     /* bits 0:12 length, others see below	*/	u32 addr;	u32 length;};/* Values for the Tx status entry. */#define CRCDisable		0x2000#define TxDComplete		0x8000#define AddIPChksum		0x02000000#define AddTCPChksum		0x04000000#define AddUDPChksum		0x08000000#define TxIntrUploaded		0x80000000              /* IRQ when in FIFO, but maybe not sent. *//* XCVR Types */#define XCVR_10baseT		0#define XCVR_AUI		1#define XCVR_10baseTOnly	2#define XCVR_10base2		3#define XCVR_100baseTx		4#define XCVR_100baseFx		5#define XCVR_MII		6#define XCVR_NWAY		8#define XCVR_ExtMII		9#define XCVR_Default		10			/* I don't think this is correct -> should have been 0x10 if Auto Negotiate */struct descriptor {			    		/* A generic descriptor. */	u32 next;                                       /* Last entry points to 0	   	*/	u32 status;					/* FSH -> Frame Start Header 		*/	u32 addr;                                       /* Up to 63 addr/len pairs possible 	*/	u32 length;                                     /* Set LAST_FRAG to indicate last pair	*/};/* Misc. definitions */#define NUM_RX_DESC 		PKTBUFSRX * 10#define NUM_TX_DESC 		1            /* Number of TX descriptors   */#define TOUT_LOOP		1000000#define ETH_ALEN		6#define EL3WINDOW(dev, win_num) ETH_OUTW(dev, SelectWindow + (win_num), EL3_CMD)#define EL3_CMD 0x0e#define EL3_STATUS 0x0e#undef ETH_DEBUG#ifdef ETH_DEBUG#define PRINTF(fmt,args...)     printf (fmt ,##args)#else#define PRINTF(fmt,args...)#endifstatic struct rx_desc_3com *rx_ring;		 	/* RX descriptor ring         		*/static struct tx_desc_3com *tx_ring;		 	/* TX descriptor ring         		*/static u8 rx_buffer[NUM_RX_DESC][PKTSIZE_ALIGN];	/* storage for the incoming messages 	*/static int rx_next = 0;                      		/* RX descriptor ring pointer 		*/static int tx_next = 0;                      		/* TX descriptor ring pointer 		*/static int tx_threshold;static void  init_rx_ring(struct eth_device* dev);static void  purge_tx_ring(struct eth_device* dev);static void  read_hw_addr(struct eth_device* dev, bd_t * bis);static int eth_3com_init(struct eth_device* dev, bd_t *bis);static int eth_3com_send(struct eth_device* dev, volatile void *packet, int length);static int eth_3com_recv(struct eth_device* dev);static void eth_3com_halt(struct eth_device* dev);#define io_to_phys(a)	pci_io_to_phys((pci_dev_t)dev->priv, a)#define phys_to_io(a)	pci_phys_to_io((pci_dev_t)dev->priv, a)#define mem_to_phys(a)	pci_mem_to_phys((pci_dev_t)dev->priv, a)#define phys_to_mem(a)	pci_phys_to_mem((pci_dev_t)dev->priv, a)static inline int ETH_INL(struct eth_device* dev, u_long addr){    __asm volatile ("eieio");	return le32_to_cpu(*(volatile u32 *)io_to_phys(addr + dev->iobase));}static inline int ETH_INW(struct eth_device* dev, u_long addr){    __asm volatile ("eieio");	return le16_to_cpu(*(volatile u16 *)io_to_phys(addr + dev->iobase));}static inline int ETH_INB(struct eth_device* dev, u_long addr){    __asm volatile ("eieio");	return *(volatile u8 *)io_to_phys(addr + dev->iobase);}static inline void ETH_OUTB(struct eth_device* dev, int command, u_long addr){	*(volatile u8 *)io_to_phys(addr + dev->iobase) = command;    __asm volatile ("eieio");}static inline void ETH_OUTW(struct eth_device* dev, int command, u_long addr){	*(volatile u16 *)io_to_phys(addr + dev->iobase) = cpu_to_le16(command);    __asm volatile ("eieio");}static inline void ETH_OUTL(struct eth_device* dev, int command, u_long addr){	*(volatile u32 *)io_to_phys(addr + dev->iobase) = cpu_to_le32(command);    __asm volatile ("eieio");}static inline int ETH_STATUS(struct eth_device* dev){    __asm volatile ("eieio");	return le16_to_cpu(*(volatile u16 *)io_to_phys(EL3_STATUS + dev->iobase));}static inline void ETH_CMD(struct eth_device* dev, int command){	*(volatile u16 *)io_to_phys(EL3_CMD + dev->iobase) = cpu_to_le16(command);    __asm volatile ("eieio");}/* Command register is always in the same spot in all the register windows *//* This function issues a command and waits for it so complete by checking the CmdInProgress bit */static int issue_and_wait(struct eth_device* dev, int command){	int i, status;	ETH_CMD(dev, command);	for (i = 0; i < 2000; i++) {		status = ETH_STATUS(dev);		/*printf ("Issue: status 0x%4x.\n", status); */		if (!(status & CmdInProgress))			return 1;	}	/* OK, that didn't work.  Do it the slow way.  One second */	for (i = 0; i < 100000; i++) {		status = ETH_STATUS(dev);		/*printf ("Issue: status 0x%4x.\n", status); */			return 1;		udelay(10);	}	PRINTF("Ethernet command: 0x%4x did not complete! Status: 0x%4x\n", command, ETH_STATUS(dev) );	return 0;}/* Determine network media type and set up 3com accordingly           *//* I think I'm going to start with something known first like 10baseT */static int auto_negotiate(struct eth_device* dev){    int i;    EL3WINDOW(dev, 1);    /* Wait for Auto negotiation to complete */    for (i = 0; i <= 1000; i++)    {	if (ETH_INW(dev, 2) & 0x04)	    break;	udelay(100);	if (i == 1000)	{	    PRINTF("Error: Auto negotiation failed\n");	    return 0;	}    }    return 1;}void eth_interrupt(struct eth_device *dev){    u16 status = ETH_STATUS(dev);    printf("eth0: status = 0x%04x\n", status);    if (!(status & IntLatch))	return;    if (status & (1<<6))    {	ETH_CMD(dev, AckIntr | (1<<6));	printf("Acknowledged Interrupt command\n");    }    if (status & DownComplete)    {	ETH_CMD(dev, AckIntr | DownComplete);	printf("Acknowledged DownComplete\n");    }    if (status & UpComplete)    {	ETH_CMD(dev, AckIntr | UpComplete);	printf("Acknowledged UpComplete\n");    }    ETH_CMD(dev, AckIntr | IntLatch);    printf("Acknowledged IntLatch\n");}int eth_3com_initialize(bd_t *bis){	u32 eth_iobase = 0, status;	int card_number = 0, ret;	struct eth_device* dev;	pci_dev_t devno;	char *s;	s = getenv("3com_base");	/* Find ethernet controller on the PCI bus */	if ((devno = pci_find_device(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C905C, 0)) < 0)	{