/* * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <ppc_asm.tmpl>#include <config.h>/* General */#define TLB_VALID   0x00000200#define _256M       0x10000000/* Supported page sizes */#define SZ_1K	    0x00000000#define SZ_4K	    0x00000010#define SZ_16K	    0x00000020#define SZ_64K	    0x00000030#define SZ_256K	    0x00000040#define SZ_1M	    0x00000050#define SZ_8M       0x00000060#define SZ_16M	    0x00000070#define SZ_256M	    0x00000090/* Storage attributes */#define SA_W	    0x00000800	    /* Write-through */#define SA_I	    0x00000400	    /* Caching inhibited */#define SA_M	    0x00000200	    /* Memory coherence */#define SA_G	    0x00000100	    /* Guarded */#define SA_E	    0x00000080	    /* Endian *//* Access control */#define AC_X	    0x00000024	    /* Execute */#define AC_W	    0x00000012	    /* Write */#define AC_R	    0x00000009	    /* Read *//* Some handy macros */#define EPN(e)		((e) & 0xfffffc00)#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )#define TLB2(a)		( (a)&0x00000fbf )#define tlbtab_start\	mflr    r1  ;\	bl 0f	    ;#define tlbtab_end\	.long 0, 0, 0	;   \0:	mflr    r0	;   \	mtlr    r1	;   \	blr		;#define tlbentry(epn,sz,rpn,erpn,attr)\	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)/************************************************************************** * TLB TABLE * * This table is used by the cpu boot code to setup the initial tlb * entries. Rather than make broad assumptions in the cpu source tree, * this table lets each board set things up however they like. * *  Pointer to the table is returned in r1 * *************************************************************************/    .section .bootpg,"ax"    .globl tlbtabtlbtab:	tlbtab_start	/*	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the	 * speed up boot process. It is patched after relocation to enable SA_I	 */#ifndef CONFIG_NAND_SPL	tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )#else	tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )#endif	/* TLB-entry for DDR SDRAM (Up to 2GB) */	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )#ifdef CFG_INIT_RAM_DCACHE	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )#endif	/* TLB-entry for PCI Memory */	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )	/* TLB-entry for EBC */	tlbentry( CFG_BCSR_BASE, SZ_1K, CFG_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )	/* TLB-entry for NAND */	tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )	/* TLB-entry for Internal Registers & OCM */	tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,  AC_R|AC_W|AC_X|SA_I )	/*TLB-entry PCI registers*/	tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1,  AC_R|AC_W|AC_X|SA_G|SA_I )	/* TLB-entry for peripherals */	tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)	/* TLB-entry PCI IO Space - from sr@denx.de */	tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)	tlbtab_end#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)	/*	 * For NAND booting the first TLB has to be reconfigured to full size	 * and with caching disabled after running from RAM!	 */#define TLB00	TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)#define TLB01	TLB1(CFG_BOOT_BASE_ADDR, 1)#define TLB02	TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)	.globl	reconfig_tlb0reconfig_tlb0:	sync	isync	addi	r4,r0,0x0000		/* TLB entry #0 */	lis	r5,TLB00@h	ori	r5,r5,TLB00@l	tlbwe	r5,r4,0x0000		/* Save it out */	lis	r5,TLB01@h	ori	r5,r5,TLB01@l	tlbwe	r5,r4,0x0001		/* Save it out */	lis	r5,TLB02@h	ori	r5,r5,TLB02@l	tlbwe	r5,r4,0x0002		/* Save it out */	sync	isync	blr#endif