;******************************************************************************
;   MSP-FET430P140 Demo - SVS, POR @ 2.5V Vcc
;
;   Description: The SVS POR feature is used to disable normal operation that
;   toggles P1.0 by xor'ing P1.0 inside of a software loop.
;   In the example, when VCC is above 2.5V, the MSP430 toggles P1.0. When VCC is
;   below 2.5V, the SVS resets the MSP430, and no toggle is seen.
;   ACLK= n/a, MCLK= SMCLK= default DCO ~ 800k
;   //* MSP430F169 Device Required *//
;
;                 MSP430F169
;              -----------------
;          /|\|              XIN|-
;           | |                 |
;           --|RST          XOUT|-
;             |                 |
;             |             P1.0|-->LED
;
;   M. Buccini
;   Texas Instruments Inc.
;   Feb 2005
;   Built with IAR Embedded Workbench Version: 3.21A
;******************************************************************************
#include  <msp430x16x.h>
;------------------------------------------------------------------------------
            ORG     01100h                  ; Progam Start
;------------------------------------------------------------------------------
RESET       mov.w   #0A00h,SP               ; Initialize stackpointer
StopWDT     mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop WDT
SetupP1     bis.b   #001h,&P1DIR            ; P1.0  output
            mov.b   #060h+PORON,&SVSCTL     ; SVS POR enabled @ 2.5V
                                            ;
Mainloop    mov.w   #050000,R15             ; Delay to R15
L1          dec.w   R15                     ; Decrement R15
            jnz     L1                      ; Delay over?
            xor.b   #001h,&P1OUT            ; Toggle P1.0
            jmp     Mainloop                ; Again
                                            ;
;------------------------------------------------------------------------------
;           Interrupt Vectors
;------------------------------------------------------------------------------
            ORG     0FFFEh                  ; MSP430 RESET Vector
            DW      RESET                   ;
            END