;******************************************************************************
;   MSP-FET430P169 Demo -  DMA0, Rpt'd Block, I2C Master Intf. to DAC8571, DCO
;   Master = '169, Slave = DAC8571
;
;   Description: Using the DMA0, 16-bit sine data is transmitted to the
;   external DAC. The DAC8571 is configured and sent continuous data without
;   a stop or repeated start condition. Data is handled in bytes by the I2C
;   module and the CPU is normally in LPM0.
;   ACLK = n/a, MCLK = SMCLK = I2CCLOCK = DCO ~ 750kHz
;
;                    MSP430x169                         DAC8571
;                  ---------------                   ------------
;                 |            SDA|<--------------->|SDA         |
;                 |     I2C    SCL|---------------->|SCL  I2C    |
;                 |   MASTER      |                 |    SLAVE   |
;                 |               |              GND|A0          |
;
;
;   DAC8571 I2C address = 0x4C (A0 = GND)
;
;   Z. Albus
;   Texas Instruments Inc.
;   Feb 2005
;   Built with IAR Embedded Workbench Version: 3.21A
;******************************************************************************
#include  <msp430x16x.h>
;------------------------------------------------------------------------------
            ORG     01100h                  ; Program Start
;------------------------------------------------------------------------------
RESET       mov.w   #0A00h,SP               ; Initialize stackpointer
            mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop Watchdog Timer
SetupP3     bis.b   #0Ah,&P3SEL             ; Assign I2C pins to module
SetupI2C    bis.b   #TXDMAEN+I2C+SYNC,&U0CTL; Enable DMA for TX, I2C mode
            bic.b   #I2CEN,&U0CTL           ; Disable I2C
            mov.b   #I2CRM+I2CSSEL1,&I2CTCTL; S/W controls data flow, SMCLK
            mov.w   #04Ch,&I2CSA            ; Slave address
            bis.b   #I2CEN,&U0CTL           ; Enable I2C
SetupDMA    mov.w   #DMA0TSEL_4,&DMACTL0    ; I2C Transmit Ready Trigger
            mov.w   #Sine_Tab,&DMA0SA       ; Source block address
            mov.w   #I2CDRB,&DMA0DA         ; Destination single address
            mov.w   #020h,&DMA0SZ           ; Block size
            mov.w   #DMADT_4+DMASRCINCR_3+DMADSTBYTE+DMASRCBYTE+DMAEN,&DMA0CTL
                                            ; Rpt, inc src, byte-byte
Main        bis.b   #MST,&U0CTL             ; Master
            bis.b   #I2CTRX+I2CSTT,&I2CTCTL ; Write, ST
            mov.b   #010h,&I2CDRB           ; Write DAC control
            bis.w   #LPM0,SR                ; Enter LPM0
End_Main    nop                             ; Required for debug
                                            ;
;-----------------------------------------------------------------------------
;           16 Point 16-bit Sine Table
            ORG     0FE00h
;-----------------------------------------------------------------------------
Sine_Tab    DB      0FFh                    ; MSB Word 0
            DB      0FFh                    ; LSB
            DB      0F6h                    ; MSB Word 1
            DB      040h                    ; LSB
            DB      0DAh                    ; MSB Word 2
            DB      081h                    ; LSB
            DB      0B0h                    ; MSB Word 3
            DB      0FAh                    ; LSB
            DB      07Fh                    ; MSB Word 4
            DB      0FFh                    ; LSB
            DB      04Fh                    ; MSB Word 5
            DB      003h                    ; LSB
            DB      025h                    ; MSB Word 6
            DB      07Ch                    ; LSB
            DB      009h                    ; MSB Word 7
            DB      0BDh                    ; LSB
            DB      000h                    ; MSB Word 8
            DB      000h                    ; LSB
            DB      009h                    ; MSB Word 9
            DB      0BDh                    ; LSB
            DB      025h                    ; MSB Word 10
            DB      07Ch                    ; LSB
            DB      04Fh                    ; MSB Word 11
            DB      003h                    ; LSB
            DB      07Fh                    ; MSB Word 12
            DB      0FEh                    ; LSB
            DB      0B0h                    ; MSB Word 13
            DB      0FAh                    ; LSB
            DB      0DAh                    ; MSB Word 14
            DB      081h                    ; LSB
            DB      0F6h                    ; MSB Word 15
            DB      040h                    ; LSB
                                            ;
;-----------------------------------------------------------------------------
;           Interrupt Vectors
;-----------------------------------------------------------------------------
             ORG     0FFFEh                  ; POR, ext. Reset, Watchdog, Flash
             DW      RESET                   ;
             END