<li>fet110_1.s43 - Software Toggle P1.0</li>
<li>fet110_138.s43 - Software Parallel Interface to HC138</li>
<li>fet110_164.s43 - Software SPI Interface to HC164 Shift Register</li>
<li>fet110_165.s43 - Software Interface to HC165 Shift Register</li>
<li>fet110_1820.s43 - Software 1-Wire Interface DS1820, Set P1.0 if > 30C</li>
<li>fet110_4511.s43 - Software Interface to CD4511 7-Segment Decoder</li>
<li>fet110_549.s43 - Software SPI Interface TLC549, Set P1.0 if > 0.5*Vcc</li>
<li>fet110_5616.s43 - Software SPI Interface to TLV5616 12-Bit DAC</li>
<li>fet110_595.s43 - Software SPI Interface to HC595 Shift Register</li>
<li>fet110_5timers.s43 - 5 Interrupt Timers & 2 Clock Outputs, 32kHz ACLK</li>
<li>fet110_7822.s43 - Software Interface to Read ADS7822</li>
<li>fet110_831.s43 - Software SPI Interface to TLV0831</li>
<li>fet110_8574.s43 - Software I2C Master Interface to PCF8574, Read/Write</li>
<li>fet110_P2_int.s43 - Software Port Interrupt on P2.0 from LPM4</li>
<li>fet110_P2_poll.s43 - Software Poll P2.0, Set P1.0 if P2.0 = 1</li>
<li>fet110_ca_01.s43 - Comp_A, Output Reference Voltages on P2.3</li>
<li>fet110_ca_02.s43 - Comp_A, Detect Threshold, Set P1.0 if P2.3 > 0.25*Vcc</li>
<li>fet110_ca_03.s43 - Comp_A, Simple 2.2V Low Battery Detect</li>
<li>fet110_ca_04.s43 - Comp_A, Slope ADC to Detect Temp Lvl, Set P1.0 > 25C</li>
<li>fet110_ca_05.s43 - Comp_A, Thermometer 59-99 F</li>
<li>fet110_ca_06.s43 - Comp_A, Thermometer 0-50 C</li>
<li>fet110_ca_07.s43 - Comp_A, Resistance Meter</li>
<li>fet110_clks.s43 - Basic Clock, Output Buffered SMCLK, ACLK and MCLK/10</li>
<li>fet110_flashwrite_01.s43 - Flash In-System Programming, Copy SegA to SegB</li>
<li>fet110_flashwrite_02.s43 - Flash In-System Programming, Copy SegA to SegB, Blk</li>
<li>fet110_fll_01.s43 - Basic Clock, Implement Auto RSEL SW FLL</li>
<li>fet110_fll_02.s43 - Basic Clock, Implement Cont. SW FLL with Auto RSEL</li>
<li>fet110_hfxtal.s43 - Basic Clock, MCLK Sourced from HF XTAL</li>
<li>fet110_hfxtal_nmi.s43 - Basic Clock, MCLK Configured with HF XTAL & Osc Fault</li>
<li>fet110_lpm3.s43 - Basic Clock, LPM3 Using WDT ISR, 32kHz ACLK</li>
<li>fet110_nmi.s43 - Basic Clock, Configure RST/NMI as NMI</li>
<li>fet110_r2r.s43 - Software Output 6-Bit R2R DAC</li>
<li>fet110_rosc.s43 - DCOCLK Biased with External Resistor Rosc</li>
<li>fet110_selftest.s43 - Use JTAG for Downloadable Test Code</li>
<li>fet110_ta_01.s43 - Timer_A, Toggle P1.0, CCR0 Cont. Mode ISR, DCO SMCLK</li>
<li>fet110_ta_02.s43 - Timer_A, Toggle P1.0, CCR0 Up Mode ISR, DCO SMCLK</li>
<li>fet110_ta_03.s43 - Timer_A, Toggle P1.0, Overflow ISR, DCO SMCLK</li>
<li>fet110_ta_04.s43 - Timer_A, Toggle P1.0, Overflow ISR, 32kHz ACLK</li>
<li>fet110_ta_05.s43 - Timer_A, Toggle P1.0, CCR0 Up Mode ISR, 32kHz ACLK</li>
<li>fet110_ta_06.s43 - Timer_A, Toggle P1.0, CCR1 Cont. Mode ISR, DCO SMCLK</li>
<li>fet110_ta_07.s43 - Timer_A, Toggle P1.0-3, Cont. Mode ISR, DCO SMCLK</li>
<li>fet110_ta_08.s43 - Timer_A, Toggle P1.0-3, Cont. Mode ISR, 32kHz ACLK</li>
<li>fet110_ta_09.s43 - Timer_A, Toggle P1.0-3, Cont. Mode ISR, HF XTAL ACLK</li>
<li>fet110_ta_10.s43 - Timer_A, Toggle P1.1/TA0, Up Mode, DCO SMCLK</li>
<li>fet110_ta_11.s43 - Timer_A, Toggle P1.1/TA0, Up Mode, 32kHz ACLK</li>
<li>fet110_ta_12.s43 - Timer_A, Toggle P1.1/TA0, Up Mode, HF XTAL ACLK</li>
<li>fet110_ta_13.s43 - Timer_A, Toggle P1.1/TA0, Up/Down Mode, DCO SMCLK</li>
<li>fet110_ta_14.s43 - Timer_A, Toggle P1.1/TA0, Up/Down Mode, 32kHz ACLK</li>
<li>fet110_ta_15.s43 - Timer_A, Toggle P1.1/TA0, Up/Down Mode, HF XTAL ACLK</li>
<li>fet110_ta_16.s43 - Timer_A, PWM TA1-2, Up Mode, DCO SMCLK</li>
<li>fet110_ta_17.s43 - Timer_A, PWM TA1-2, Up Mode, 32kHz ACLK</li>
<li>fet110_ta_18.s43 - Timer_A, PWM TA1-2 Up Mode, HF XTAL ACLK</li>
<li>fet110_ta_19.s43 - Timer_A, PWM TA1-2, Up/Down Mode, DCO SMCLK</li>
<li>fet110_ta_20.s43 - Timer_A, PWM TA1-2, Up/Down Mode, 32kHz ACLK</li>
<li>fet110_ta_21.s43 - Timer_A, PWM TA1-2, Up/Down Mode, HF XTAL ACLK</li>
<li>fet110_ta_22.s43 - Timer_A, Output 40kHz Square Wave, Up Mode, DCO SMCLK</li>
<li>fet110_ta_23.s43 - Timer_A, Ultra-Low Pwr 1200Hz Detect, ACLK +/- 5%</li>
<li>fet110_ta_24.s43 - Timer_A, Ultra-Low Pwr 1800Hz Detect, SMCLK +/- 1%</li>
<li>fet110_ta_uart115k.s43 - Timer_A, UART 115200 Echo, HF XTAL ACLK</li>
<li>fet110_ta_uart19200_01.s43 - Timer_A, UART 19200 Echo, HF XTAL ACLK</li>
<li>fet110_ta_uart19200_02.s43 - Timer_A, Ultra-Low Pwr UART 19200 Echo, 32kHz ACLK</li>
<li>fet110_ta_uart19200_03.s43 - Timer_A, UART 19200 Echo, 32kHz ACLK</li>
<li>fet110_ta_uart19200_04.s43 - Timer_A, Ultra-Low Pwr UART 19200 Echo, No XTAL ROSC</li>
<li>fet110_ta_uart2400.s43 - Timer_A, Ultra-Low Pwr UART 2400 Echo, 32kHz ACLK</li>
<li>fet110_ta_uart9600_01.s43 - Timer_A, UART 9600 Echo, HF XTAL ACLK</li>
<li>fet110_ta_uart9600_02.s43 - Timer_A, Ultra-Low Pwr UART 9600 Echo, 32kHz ACLK</li>
<li>fet110_ta_uart9600_03.s43 - Timer_A, UART 9600 Echo, 32kHz ACLK</li>
<li>fet110_ta_uart9600_04.s43 - Timer_A, Ultra-Low Pwr UART 9600 Echo, No XTAL, ROSC</li>
<li>fet110_ta_uart9600_05.s43 - Timer_A, Ultra-Low Pwr UART 9600 String, 32kHz ACLK</li>
<li>fet110_ta_uart9600_06.s43 - Timer_A, Ultra-Low Pwr UART 9600 Echo, 32kHz ACLK</li>
<li>fet110_tmp100.s43 - Software I2C Master Interface to TMP100</li>
<li>fet110_tvrc5_rx.s43 - Decode RC5 IR Remote Control, 32kHz ACLK</li>
<li>fet110_tvrc5_rx2.s43 - Decode RC5 IR Remote Control, No XTAL, Rosc</li>
<li>fet110_tvrc5_tx.s43 - Encode RC5 IR Remote Control, 32kHz ACLK</li>
<li>fet110_tvrc5_tx2.s43 - Encode RC5 IR Remote Control, No XTAL, Rosc</li>
<li>fet110_wdt_01.s43 - WDT, Toggle P1.0, Interval Overflow ISR, DCO SMCLK</li>
<li>fet110_wdt_02.s43 - WDT, Toggle P1.0, Interval Overflow ISR, 32kHz ACLK</li>
<li>fet110_wdt_03.s43 - WDT, Toggle P1.0, Interval Overflow ISR, HF XTAL ACLK</li>