function [Bspec,waxis] = ...
    bispecdx (x, y, z, nfft, wind, nsamp, overlap,plotflag)
%BISPECDX Cross-Bispectrum estimation using the direct (fft-based) approach.
%	[Bspec,waxis] = bispecdx (x,y,z, nfft, wind, segsamp,overlap,plotflag)
%	x    - data vector or time-series
%	y    - data vector or time-series  (same dimensions as x)
%	z    - data vector or time-series  (same dimensions as x)
%	nfft - fft length [default = power of two > segsamp]
%	wind - window specification for frequency-domain smoothing
%	       if 'wind' is a scalar, it specifies the length of the side
%	          of the square for the Rao-Gabr optimal window  [default=5]
%	       if 'wind' is a vector, a 2D window will be calculated via
%	          w2(i,j) = wind(i) * wind(j) * wind(i+j)
%	       if 'wind' is a matrix, it specifies the 2-D filter directly
%	segsamp - samples per segment [default: such that we have 8 segments]
%	        - if x is a matrix, segsamp is set to the number of rows
%	overlap - percentage overlap, allowed range [0,99]. [default = 50];
%	        - if x is a matrix, overlap is set to 0.
%	plotflag- if 0, cross-bispectrum will not be displayed [default=1]
%	Bspec   - estimated bispectrum: an nfft x nfft array, with origin
%	          at the center, and axes pointing down and to the right.
%	waxis   - vector of frequencies associated with the rows and columns
%	          of Bspec;  sampling frequency is assumed to be 1.

%  Copyright (c) 1991-1999 by United Signals & Systems, Inc. and The Mathworks, Inc. All Rights Reserved.
%       $Revision: 1.8 $
%  A. Swami   January 20, 1995

%     RESTRICTED RIGHTS LEGEND
% Use, duplication, or disclosure by the Government is subject to
% restrictions as set forth in subparagraph (c) (1) (ii) of the
% Rights in Technical Data and Computer Software clause of DFARS
% 252.227-7013.
% Manufacturer: United Signals & Systems, Inc., P.O. Box 2374,
% Culver City, California 90231.
%
%  This material may be reproduced by or for the U.S. Government pursuant
%  to the copyright license under the clause at DFARS 252.227-7013.

% ----------------------- Parameter checks  ---------------------------
    [lx, lrecs] = size(x);
    [ly, nrecs] = size(y);
    [lz, krecs] = size(z);
    if (lx ~= ly | lrecs ~= nrecs | ly ~= lz | nrecs ~= krecs)
       error(' x, y and z should have identical dimensions')
    end

    if (ly == 1)
       x = x(:);  y = y(:);  z = z(:); ly = nrecs; nrecs = 1;
    end

    if (exist('plotflag') ~= 1)    plotflag = 1;   end
    if (exist('nfft') ~= 1)            nfft = 128; end
    if (exist('overlap') ~= 1)      overlap = 50;  end
    overlap = min(99, max(overlap,0));
    if (nrecs > 1)                  overlap =  0;  end
    if (exist('nsamp') ~= 1)          nsamp = 0;   end
    if (nrecs > 1)                    nsamp = ly;  end
    if (nrecs == 1 & nsamp <= 0)
       nsamp = fix(ly/ (8 - 7 * overlap/100));
    end
    if (nfft  < nsamp)   nfft = 2^nextpow2(nsamp); end
    overlap  = fix(overlap/100  * nsamp);
    nadvance = nsamp - overlap;
    nrecs    = fix ( (ly*nrecs - overlap) / nadvance);


% ------------------- create the 2-D window -------------------------
  if (exist('wind') ~= 1) wind = 5; end
  [m,n] = size(wind);
  window = wind;
  if (max(m,n) == 1)     % scalar: wind is size of Rao-Gabr window
     winsize = wind;
     if (winsize < 0) winsize = 5; end        % the window length L
     winsize = winsize - rem(winsize,2) + 1;  % make it odd
     if (winsize > 1)
        mwind   = fix (nfft/winsize);            % the scale parameter M
        lby2    = (winsize - 1)/2;

        theta  = -lby2:lby2;
        opwind = ones(winsize,1) * (theta .^2);       % w(m,n)=m^2
        opwind = opwind + opwind' + theta' * theta;   % m^2 + n^2 + mn
        opwind = 1 - (2*mwind/nfft)^2 * opwind;       %
        hex    = ones(winsize,1) * theta;             % m
        hex    = abs(hex) + abs(hex') + abs(hex+hex');
        hex    = (hex < winsize);
        opwind = opwind .* hex;
        opwind = opwind * (4 * mwind^2) / (7 * pi^2) ;
     else
        opwind = 1;
     end

  elseif (min(m,n) == 1)  % 1-D window passed: convert to 2-D
     window = window(:);
     if (any(imag(window) ~= 0 ))
        disp(['1-D window has imaginary components: window ignored'])
        window = 1;
     end
     if (any(window < 0))
        disp(['1-D window has negative components: window ignored'])
        window = 1;
     end
     lwind  = length(window);
     windf  = [window(lwind:-1:2); window];    % the full symmetric 1-D
     window = [window; zeros(lwind-1,1)];
     opwind = (windf * windf')      ...
              .* hankel(flipud(window), window); % w(m)w(n)w(m+n)
     winsize = length(window);

  else                    % 2-D window passed: use directly
    winsize = m;
    if (m ~= n)
       disp('2-D window is not square: window ignored')
       window = 1;
       winsize = m;
    end
    if (rem(m,2) == 0)
       disp('2-D window does not have odd length: window ignored')
       window = 1;
       winsize = m;
    end
    opwind  = window;
  end

% ---------------- accumulate triple products ----------------------

    Bspec    = zeros(nfft,nfft);

    mask = hankel([1:nfft],[nfft,1:nfft-1] );   % the hankel mask (faster)
    locseg = [1:nsamp]';
    for krec = 1:nrecs
        xseg   = x(locseg);
	yseg   = y(locseg);
        zseg   = z(locseg);
        Xf     = fft(xseg-mean(xseg), nfft)/nsamp;
        Yf     = fft(yseg-mean(yseg), nfft)/nsamp;
        CZf    = fft(zseg-mean(zseg), nfft)/nsamp;
        CZf    = conj(CZf);
        Bspec  = Bspec + (Xf * Yf.') .* ...
	         reshape(CZf(mask), nfft, nfft);
        locseg = locseg + nadvance;
    end

    Bspec = fftshift(Bspec)/(nrecs);

% ----------------- frequency-domain smoothing ------------------------

  if (winsize > 1)
      lby2 = (winsize-1)/2;
      Bspec = conv2(Bspec,opwind);
      Bspec = Bspec(lby2+1:lby2+nfft,lby2+1:lby2+nfft);
  end
% ------------ contout plot of magnitude bispectum --------------------

   if (rem(nfft,2) == 0)
       waxis = [-nfft/2:(nfft/2-1)]'/nfft;
   else
       waxis = [-(nfft-1)/2:(nfft-1)/2]'/nfft;
   end

if (plotflag)
   hold off, clf
%   contour(abs(Bspec),4,waxis,waxis),grid
   contour(waxis,waxis,abs(Bspec),4), grid on 
   title('Cross-Bispectrum ')
   xlabel('f1'), ylabel('f2')
   set(gcf,'Name','Hosa BISPECDX')
end
return