;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
;***** Created: 2007-12-13 07:27 ******* Source: AT90S8535.xml ***********
;*************************************************************************
;* A P P L I C A T I O N   N O T E   F O R   T H E   A V R   F A M I L Y
;* 
;* Number            : AVR000
;* File Name         : "8535def.inc"
;* Title             : Register/Bit Definitions for the AT90S8535
;* Date              : 2007-12-13
;* Version           : 2.24
;* Support E-mail    : avr@atmel.com
;* Target MCU        : AT90S8535
;* 
;* DESCRIPTION
;* When including this file in the assembly program file, all I/O register 
;* names and I/O register bit names appearing in the data book can be used.
;* In addition, the six registers forming the three data pointers X, Y and 
;* Z have been assigned names XL - ZH. Highest RAM address for Internal 
;* SRAM is also defined 
;* 
;* The Register names are represented by their hexadecimal address.
;* 
;* The Register Bit names are represented by their bit number (0-7).
;* 
;* Please observe the difference in using the bit names with instructions
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
;* (skip if bit in register set/cleared). The following example illustrates
;* this:
;* 
;* in    r16,PORTB             ;read PORTB latch
;* sbr   r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
;* out   PORTB,r16             ;output to PORTB
;* 
;* in    r16,TIFR              ;read the Timer Interrupt Flag Register
;* sbrc  r16,TOV0              ;test the overflow flag (use bit#)
;* rjmp  TOV0_is_set           ;jump if set
;* ...                         ;otherwise do something else
;*************************************************************************

#ifndef _8535DEF_INC_
#define _8535DEF_INC_


#pragma partinc 0

; ***** SPECIFY DEVICE ***************************************************
.device AT90S8535
#pragma AVRPART ADMIN PART_NAME AT90S8535
.equ	SIGNATURE_000	= 0x1e
.equ	SIGNATURE_001	= 0x93
.equ	SIGNATURE_002	= 0x03

#pragma AVRPART CORE CORE_VERSION V1


; ***** I/O REGISTER DEFINITIONS *****************************************
; NOTE:
; Definitions marked "MEMORY MAPPED"are extended I/O ports
; and cannot be used with IN/OUT instructions
.equ	SREG	= 0x3f
.equ	SPL	= 0x3d
.equ	SPH	= 0x3e
.equ	GIMSK	= 0x3b
.equ	GIFR	= 0x3a
.equ	TIMSK	= 0x39
.equ	TIFR	= 0x38
.equ	MCUCR	= 0x35
.equ	MCUSR	= 0x34
.equ	TCCR0	= 0x33
.equ	TCNT0	= 0x32
.equ	TCCR1A	= 0x2f
.equ	TCCR1B	= 0x2e
.equ	TCNT1L	= 0x2c
.equ	TCNT1H	= 0x2d
.equ	OCR1AL	= 0x2a
.equ	OCR1AH	= 0x2b
.equ	OCR1BL	= 0x28
.equ	OCR1BH	= 0x29
.equ	ICR1L	= 0x26
.equ	ICR1H	= 0x27
.equ	TCCR2	= 0x25
.equ	TCNT2	= 0x24
.equ	OCR2	= 0x23
.equ	ASSR	= 0x22
.equ	WDTCR	= 0x21
.equ	EEARL	= 0x1e
.equ	EEARH	= 0x1f
.equ	EEDR	= 0x1d
.equ	EECR	= 0x1c
.equ	PORTA	= 0x1b
.equ	DDRA	= 0x1a
.equ	PINA	= 0x19
.equ	PORTB	= 0x18
.equ	DDRB	= 0x17
.equ	PINB	= 0x16
.equ	PORTC	= 0x15
.equ	DDRC	= 0x14
.equ	PINC	= 0x13
.equ	PORTD	= 0x12
.equ	DDRD	= 0x11
.equ	PIND	= 0x10
.equ	SPDR	= 0x0f
.equ	SPSR	= 0x0e
.equ	SPCR	= 0x0d
.equ	UDR	= 0x0c
.equ	USR	= 0x0b
.equ	UCR	= 0x0a
.equ	UBRR	= 0x09
.equ	ACSR	= 0x08
.equ	ADMUX	= 0x07
.equ	ADCSR	= 0x06
.equ	ADCH	= 0x05
.equ	ADCL	= 0x04


; ***** BIT DEFINITIONS **************************************************

; ***** TIMER_COUNTER_0 **************
; TIMSK - Timer/Counter Interrupt Mask Register
.equ	TOIE0	= 0	; Timer/Counter0 Overflow Interrupt Enable

; TIFR - Timer/Counter Interrupt Flag register
.equ	TOV0	= 0	; Timer/Counter0 Overflow Flag

; TCCR0 - Timer/Counter0 Control Register
.equ	CS00	= 0	; Clock Select0 bit 0
.equ	CS01	= 1	; Clock Select0 bit 1
.equ	CS02	= 2	; Clock Select0 bit 2

; TCNT0 - Timer Counter 0
.equ	TCNT00	= 0	; Timer Counter 0 bit 0
.equ	TCNT01	= 1	; Timer Counter 0 bit 1
.equ	TCNT02	= 2	; Timer Counter 0 bit 2
.equ	TCNT03	= 3	; Timer Counter 0 bit 3
.equ	TCNT04	= 4	; Timer Counter 0 bit 4
.equ	TCNT05	= 5	; Timer Counter 0 bit 5
.equ	TCNT06	= 6	; Timer Counter 0 bit 6
.equ	TCNT07	= 7	; Timer Counter 0 bit 7


; ***** TIMER_COUNTER_1 **************
; TIMSK - Timer/Counter Interrupt Mask Register
.equ	TOIE1	= 2	; Timer/Counter1 Overflow Interrupt Enable
.equ	OCIE1B	= 3	; Timer/Counter1 Output CompareB Match Interrupt Enable
.equ	OCIE1A	= 4	; Timer/Counter1 Output CompareA Match Interrupt Enable
.equ	TICIE1	= 5	; Timer/Counter1 Input Capture Interrupt Enable

; TIFR - Timer/Counter Interrupt Flag register
.equ	TOV1	= 2	; Timer/Counter1 Overflow Flag
.equ	OCF1B	= 3	; Output Compare Flag 1B
.equ	OCF1A	= 4	; Output Compare Flag 1A
.equ	ICF1	= 5	; Input Capture Flag 1

; TCCR1A - Timer/Counter1 Control Register A
.equ	PWM10	= 0	; Pulse Width Modulator Select Bit 0
.equ	PWM11	= 1	; Pulse Width Modulator Select Bit 1
.equ	COM1B0	= 4	; Compare Output Mode 1B, bit 0
.equ	COM1B1	= 5	; Compare Output Mode 1B, bit 1
.equ	COM1A0	= 6	; Compare Ouput Mode 1A, bit 0
.equ	COM1A1	= 7	; Compare Output Mode 1A, bit 1

; TCCR1B - Timer/Counter1 Control Register B
.equ	CS10	= 0	; Clock Select1 bit 0
.equ	CS11	= 1	; Clock Select1 bit 1
.equ	CS12	= 2	; Clock Select1 bit 2
.equ	CTC1	= 3	; Clear Timer/Counter1 on Compare Match
.equ	ICES1	= 6	; Input Capture 1 Edge Select
.equ	ICNC1	= 7	; Input Capture 1 Noise Canceler


; ***** TIMER_COUNTER_2 **************
; TCCR2 - Timer/Counter Control Register
.equ	CS20	= 0	; Clock Select
.equ	CS21	= 1	; Clock Select
.equ	CS22	= 2	; Clock Select
.equ	CTC2	= 3	; Clear Timer/Counter Compare Match
.equ	COM20	= 4	; Compare Match Output Mode
.equ	COM21	= 5	; Compare Match Output Mode
.equ	PWM2	= 6	; Pulse Width Modulator Enable

; TCNT2 - Timer/Counter Register
.equ	TCNT2_0	= 0	; Timer/Counter Register Bit 0
.equ	TCNT2_1	= 1	; Timer/Counter Register Bit 1
.equ	TCNT2_2	= 2	; Timer/Counter Register Bit 2
.equ	TCNT2_3	= 3	; Timer/Counter Register Bit 3
.equ	TCNT2_4	= 4	; Timer/Counter Register Bit 4
.equ	TCNT2_5	= 5	; Timer/Counter Register Bit 5
.equ	TCNT2_6	= 6	; Timer/Counter Register Bit 6
.equ	TCNT2_7	= 7	; Timer/Counter Register Bit 7

; OCR2 - Output Compare Register
.equ	OCR2_0	= 0	; Output Compare Register Bit 0
.equ	OCR2_1	= 1	; Output Compare Register Bit 1
.equ	OCR2_2	= 2	; Output Compare Register Bit 2
.equ	OCR2_3	= 3	; Output Compare Register Bit 3
.equ	OCR2_4	= 4	; Output Compare Register Bit 4
.equ	OCR2_5	= 5	; Output Compare Register Bit 5
.equ	OCR2_6	= 6	; Output Compare Register Bit 6
.equ	OCR2_7	= 7	; Output Compare Register Bit 7

; ASSR - Asynchronous Status Register
.equ	TCR2UB	= 0	; Timer/Counter Control Register2 Update Busy
.equ	OCR2UB	= 1	; Output Compare Register2 Update Busy
.equ	TCN2UB	= 2	; Timer/Counter2 Update Busy
.equ	AS2	= 3	; Asynchronous Timer 2

; TIMSK - Timer/Counter Interrupt Mask Register
.equ	TOIE2	= 6	; Timer/Counter2 Overflow Interrupt Enable
.equ	OCIE2	= 7	; Timer/Counter2 Output Compare Match Interrupt Enable

; TIFR - Timer/Counter Interrupt Flag Register
.equ	TOV2	= 6	; Timer/Counter2 Overflow Flag
.equ	OCF2	= 7	; Output Compare Flag 2


; ***** UART *************************
; UDR - UART I/O Data Register
.equ	UDR0	= 0	; UART I/O Data Register bit 0
.equ	UDR1	= 1	; UART I/O Data Register bit 1
.equ	UDR2	= 2	; UART I/O Data Register bit 2
.equ	UDR3	= 3	; UART I/O Data Register bit 3
.equ	UDR4	= 4	; UART I/O Data Register bit 4
.equ	UDR5	= 5	; UART I/O Data Register bit 5
.equ	UDR6	= 6	; UART I/O Data Register bit 6
.equ	UDR7	= 7	; UART I/O Data Register bit 7

; USR - UART Status Register
.equ	DOR	= 3	; Data overRun
.equ	FE	= 4	; Framing Error
.equ	UDRE	= 5	; UART Data Register Empty
.equ	TXC	= 6	; UART Transmit Complete
.equ	RXC	= 7	; UART Receive Complete

; UCR - UART Control Register
.equ	TXB8	= 0	; Transmit Data Bit 8
.equ	RXB8	= 1	; Receive Data Bit 8
.equ	CHR9	= 2	; 9-bit Characters
.equ	TXEN	= 3	; Transmitter Enable
.equ	RXEN	= 4	; Receiver Enable
.equ	UDRIE	= 5	; UART Data Register Empty Interrupt Enable
.equ	TXCIE	= 6	; TX Complete Interrupt Enable
.equ	RXCIE	= 7	; RX Complete Interrupt Enable

; UBRR - UART BAUD Rate Register
.equ	UBRR0	= 0	; UART Baud Rate Register bit 0
.equ	UBRR1	= 1	; UART Baud Rate Register bit 1
.equ	UBRR2	= 2	; UART Baud Rate Register bit 2
.equ	UBRR3	= 3	; UART Baud Rate Register bit 3
.equ	UBRR4	= 4	; UART Baud Rate Register bit 4
.equ	UBRR5	= 5	; UART Baud Rate Register bit 5
.equ	UBRR6	= 6	; UART Baud Rate Register bit 6
.equ	UBRR7	= 7	; UART Baud Rate Register bit 7


; ***** SPI **************************
; SPDR - SPI Data Register
.equ	SPDR0	= 0	; SPI Data Register bit 0
.equ	SPDR1	= 1	; SPI Data Register bit 1
.equ	SPDR2	= 2	; SPI Data Register bit 2
.equ	SPDR3	= 3	; SPI Data Register bit 3
.equ	SPDR4	= 4	; SPI Data Register bit 4
.equ	SPDR5	= 5	; SPI Data Register bit 5
.equ	SPDR6	= 6	; SPI Data Register bit 6
.equ	SPDR7	= 7	; SPI Data Register bit 7

; SPSR - SPI Status Register
.equ	WCOL	= 6	; Write Collision Flag
.equ	SPIF	= 7	; SPI Interrupt Flag

; SPCR - SPI Control Register
.equ	SPR0	= 0	; SPI Clock Rate Select 0
.equ	SPR1	= 1	; SPI Clock Rate Select 1
.equ	CPHA	= 2	; Clock Phase
.equ	CPOL	= 3	; Clock polarity
.equ	MSTR	= 4	; Master/Slave Select
.equ	DORD	= 5	; Data Order
.equ	SPE	= 6	; SPI Enable
.equ	SPIE	= 7	; SPI Interrupt Enable


; ***** PORTA ************************
; PORTA - Port A Data Register
.equ	PORTA0	= 0	; Port A Data Register bit 0
.equ	PA0	= 0	; For compatibility
.equ	PORTA1	= 1	; Port A Data Register bit 1
.equ	PA1	= 1	; For compatibility
.equ	PORTA2	= 2	; Port A Data Register bit 2
.equ	PA2	= 2	; For compatibility
.equ	PORTA3	= 3	; Port A Data Register bit 3
.equ	PA3	= 3	; For compatibility
.equ	PORTA4	= 4	; Port A Data Register bit 4
.equ	PA4	= 4	; For compatibility
.equ	PORTA5	= 5	; Port A Data Register bit 5
.equ	PA5	= 5	; For compatibility
.equ	PORTA6	= 6	; Port A Data Register bit 6
.equ	PA6	= 6	; For compatibility
.equ	PORTA7	= 7	; Port A Data Register bit 7
.equ	PA7	= 7	; For compatibility

; DDRA - Port A Data Direction Register
.equ	DDA0	= 0	; Data Direction Register, Port A, bit 0
.equ	DDA1	= 1	; Data Direction Register, Port A, bit 1
.equ	DDA2	= 2	; Data Direction Register, Port A, bit 2
.equ	DDA3	= 3	; Data Direction Register, Port A, bit 3
.equ	DDA4	= 4	; Data Direction Register, Port A, bit 4
.equ	DDA5	= 5	; Data Direction Register, Port A, bit 5
.equ	DDA6	= 6	; Data Direction Register, Port A, bit 6