%
% FUNCTION 8.8 : "cp0802_IEEEuwb"
%
% Generates the channel impulse response for a multipath
% channel according to the statistical model proposed by
% the IEEE 802.15.SG3a. 
%
% 'fc' is the sampling frequency
% 'TMG' is the total multipath gain
%
% The function returns:
% 1) the channel impulse response 'h0'
% 2) the equivalent discrete-time impulse response 'hf'
% 3) the value of the Observation Time 'OT'
% 4) the value of the resolution time 'ts'
% 5) the value of the total multipath gain 'X'
%
% Programmed by Guerino Giancola
%

function [h0,hf,OT,ts,X] = cp0802_IEEEuwbLOS(fc,TMG);


% ----------------------------
% Step Zero - Input parameters
% ----------------------------

OT = 200e-9;              % Observation Time [s]
ts = 1e-9;                % time resolution [s]
                          % i.e. the 'bin' duration  

LAMBDA = 0.0667*1e9;      % Cluster Arrival Rate (1/s)
lambda = 2.1e9;           % Ray Arrival Rate (1/s)
GAMMA = 14e-9;            % Cluster decay factor  
gamma = 7.9e-9;            % Ray decay factor  
sigma1 = 10^(3.3941/10);  % Stdev of the cluster fading
sigma2 = 10^(3.3941/10);  % Stdev of the ray fading
sigmax = 10^(3/10);       % Stdev of lognormal shadowing


% ray decay threshold
rdt = 0.001;
% rays are neglected when exp(-t/gamma)<rdt

% peak treshold [dB]
PT = 50;
% rays are considered if their amplitude is 
% whithin the -PT range with respect to the peak

G = 1;
% G = 1 graphical output
% G = 0 no graphical output

% -----------------------------------
% Step One - Cluster characterization
% -----------------------------------

dt = 1 / fc;        % sampling time

T = 1 / LAMBDA;     % Average cluster inter-arrival time
                    % [s]
t = 1 / lambda;     % Average ray inter-arrival time [s]

i = 1;
CAT(i)=0;           % First Cluster Arrival Time
next = 0;     
while next < OT
    i = i + 1;
    next = next + expinv(rand,T);
    if next < OT 
        CAT(i)= next;
    end
end % while remaining > 0

% --------------------------------
% Step Two - Path characterization
% --------------------------------

NC = length(CAT);   % Number of observed clusters
logvar = (1/20)*((sigma1^2)+(sigma2^2))*log(10);
omega = 1;
pc = 0;             % path-counter

for i = 1 : NC
    
    pc = pc + 1;
    CT = CAT(i);    % cluster time
    
    HT(pc) = CT;
    
    next = 0;
    mx = 10*log(omega)-(10*CT/GAMMA);
    mu = (mx/log(10))-logvar;
    a = 10^((mu+(sigma1*randn)+(sigma2*randn))/20);
    
    HA(pc) = ((rand>0.5)*2-1).*a;
    
    ccoeff = sigma1*randn;  % fast fading on the cluster
    
    while exp(-next/gamma)>rdt
    
    pc = pc + 1;
    next = next + expinv(rand,t);
    HT(pc) = CT + next;
    mx = 10*log(omega)-(10*CT/GAMMA)-(10*next/GAMMA);
    mu = (mx/log(10))-logvar;
    a = 10^((mu+ccoeff+(sigma2*randn))/20);
    HA(pc) = ((rand>0.5)*2-1).*a;
          
    end

end % for i = 1 : NC

% Weak peak filtering
peak = abs(max(HA));
limit = peak/10^(PT/10);
HA = HA .* (abs(HA)>(limit.*ones(1,length(HA))));

for i = 1 : pc
    itk = floor(HT(i)/dt);
    h(itk+1) = HA(i);
end

% -------------------------------------------
% Step Three - Discrete time impulse response
% -------------------------------------------

N = floor(ts/dt);
L = N*ceil(length(h)/N);
h0 = zeros(1,L);
hf = h0;
h0(1:length(h)) = h;
for i = 1 : (length(h0)/N)
    tmp = 0;
    for j = 1 : N
        tmp = tmp + h0(j+(i-1)*N);
    end
    hf(1+(i-1)*N) = tmp;
end


% Energy normalization
E_tot=sum(h.^2);
h0 = h0 / sqrt(E_tot);
E_tot=sum(hf.^2);
hf = hf / sqrt(E_tot);

% Log-normal shadowing
mux = ((10*log(TMG))/log(10)) - (((sigmax^2)*log(10))/20);

X = 10^((mux+(sigmax*randn))/20);

h0 = X.*h0;
hf = X.*hf;

% -----------------------------
% Step Four - Graphical Output
% -----------------------------


if G
    
    Tmax = dt*length(h0);
    time = (0:dt:Tmax-dt);
    
    figure(1)
    S1=stem(time,h0);
    AX=gca;
    set(AX,'FontSize',14);
    T=title('Channel Impulse Response');
    set(T,'FontSize',14);
    x=xlabel('Time [s]');
    set(x,'FontSize',14);
    y=ylabel('Amplitude Gain');
    set(y,'FontSize',14);
    figure(2)
    S2=stairs(time,hf);
    AX=gca;
    set(AX,'FontSize',14);
    T=title('Discrete Time Impulse Response');
    set(T,'FontSize',14);
    x=xlabel('Time [s]');
    set(x,'FontSize',14);
    y=ylabel('Amplitude Gain');
    set(y,'FontSize',14);

end