;*******************************************************************************
; FILENAME	: 2608A_TEMPLATE.ASM for S8KE ICE
; AUTHOR	: SONiX
; PURPOSE	: Template Code for SN8P2708A
; REVISION	: 07/07/2004 V1.0	First issue
;*******************************************************************************
;*  (c) Copyright 2004, SONiX TECHNOLOGY CO., LTD.
;*******************************************************************************

CHIP		SN8P2608	; Select the CHIP
//{{SONIX_CODE_OPTION
	.Code_Option	Noise_Filter	Enable
	.Code_Option	Reset_Pin	Reset
	.Code_Option	Watch_Dog	Disable		; Disable Watchdog
	.Code_Option	High_Clk	4M_X'tal	; Crystal/Resonator: 2Mhz~10Mhz
	.Code_Option	Fcpu		#2     ; Fcpu = High_Clk/4
	.Code_Option	Security	Disable
//}}SONIX_CODE_OPTION

;-------------------------------------------------------------------------------
;			Include Files
;-------------------------------------------------------------------------------
.nolist							; do not list the macro file

	INCLUDESTD	MACRO1.H
	INCLUDESTD	MACRO2.H
	INCLUDESTD	MACRO3.H

.list							; Enable the listing function

;-------------------------------------------------------------------------------
;			Constants Definition
;-------------------------------------------------------------------------------
;	ONE		EQU		1

;-------------------------------------------------------------------------------
;			Variables Definition
;-------------------------------------------------------------------------------
.DATA
			org	0h			;Bank 0 data section start from RAM address 0x000
	wk00		DS	1			;Temporary buffer for main loop
	Wk00B0		DS	1			;Temporary buffer for main loop
	Iwk00B0		DS	1			;Temporary buffer for ISR	
	t1		DS	1	

;-------------------------------------------------------------------------------
;			Bit Flag Definition
;-------------------------------------------------------------------------------
	Wk00B0_0    	EQU	Wk00B0.0  	  	;Bit 0 of Wk00B0
	Iwk00B0_1 	EQU	Iwk00B0.1   		;Bit 1 of Iwk00

;-------------------------------------------------------------------------------
;			Code section
;-------------------------------------------------------------------------------
.CODE
		ORG	0				;Code section start
	jmp		Reset				;Reset vector
							;Address 4 to 7 are reserved
		ORG	8				
	jmp		Isr				;Interrupt vector

		ORG	10h
;-------------------------------------------------------------------------------
;			Program reset section
;-------------------------------------------------------------------------------
Reset:
	mov 	    	A,#07Fh				;Initial stack pointer and
   	b0mov 		STKP,A				;disable global interrupt
    		
	clr		PFLAG				;pflag = x,x,x,x,x,c,dc,z
	mov     	A,#00h				;Initial system mode
	b0mov   	OSCM,A
	
	mov		A, #0x5A
	b0mov		WDTR, A				;Clear watchdog timer

    	call    	ClrRAM				;Clear RAM
    	call    	SysInit				;System initial
    	b0bset  	FGIE				;Enable global interrupt

;-------------------------------------------------------------------------------
;			Main routine
;-------------------------------------------------------------------------------
Main:
	mov		A, #0x5A
	b0mov		WDTR, A				;Clear watchdog timer

	call		MnApp

	jmp		Main

;-------------------------------------------------------------------------------
;			Main application
;-------------------------------------------------------------------------------
MnApp:

	;---------------------------------------------------------------
	; Put your main program here
	;---------------------------------------------------------------


	ret

;-----------------------------------
;	Jump table routine
;-----------------------------------
		ORG	0x0100				;The jump table should start from the head 
							;of boundary.
	b0mov		A,Wk00              
	and		A,#3
	ADD         	PCL,A
	jmp         	JmpSub0
	jmp         	JmpSub1
	jmp         	JmpSub2
;-----------------------------------
JmpSub0:
	; Subroutine 1
	jmp		JmpExit

JmpSub1:
	; Subroutine 2
	jmp		JmpExit

JmpSub2:
	; Subroutine 3
	jmp		JmpExit

JmpExit:
	ret						;Return Main

;-------------------------------------------------------------------------------
; Isr (Interrupt Service Routine)
; Arguments	: 
; Returns	: 
; Reg Change: 
;-------------------------------------------------------------------------------
Isr:
;-----------------------------------
;	Save ACC and system registers
;-----------------------------------
	push						;Save A and Pflag
							

;-----------------------------------
;   Check which interrupt happen
;-----------------------------------

INTP00CHK:						; Check INT0 interrupt request
	B0BTS1	FP00IEN					; Check P00IEN
	JMP	INTP01CHK				; Jump check to next interrupt
	B0BTS0	FP00IRQ					; Check P00IRQ
	JMP	INTP00					; Jump to INT0 interrupt service routine
INTP01CHK:						; Check INT1 interrupt request
	B0BTS1	FP01IEN					; Check P01IEN
	JMP	INTT0CHK				; Jump check to next interrupt
	B0BTS0	FP01IRQ					; Check P01IRQ
	JMP	INTP01					; Jump to INT1 interrupt service routine
INTT0CHK:						; Check T0 interrupt request
	B0BTS1	FT0IEN					; Check T0IEN
	JMP	INTTC1CHK				; Jump check to next interrupt
	B0BTS0	FT0IRQ					; Check T0IRQ
	JMP	INTT0					; Jump to T0 interrupt service routine
INTTC1CHK:						; Check TC1 interrupt request
	B0BTS1	FTC1IEN					; Check TC1IEN
	JMP	INT_EXIT				; Jump to exit of IRQ
	B0BTS0	FTC1IRQ					; Check TC1IRQ
	JMP	INTTC1					; Jump to TC1 interrupt service routine

;-----------------------------------
; Exit interrupt service routine
;-----------------------------------

INT_EXIT:

	pop						;Restore A and Pflag

	reti						;Exit the interrupt routine

;-------------------------------------------------------------------------------
;	INT0 interrupt service routine
;-------------------------------------------------------------------------------
INTP00:
	b0bclr	FP00IRQ

	;Process P0.0 external interrupt here

	jmp	INT_EXIT
;-------------------------------------------------------------------------------
;	INT1 interrupt service routine
;-------------------------------------------------------------------------------
INTP01:
	b0bclr	FP01IRQ

	;Process P0.1 external interrupt here

	jmp	INT_EXIT

;-------------------------------------------------------------------------------
;	T0 interrupt service routine
;-------------------------------------------------------------------------------
INTT0:
	b0bclr	FT0IRQ

	;Process T0 internal interrupt here

	jmp	INT_EXIT
	
;-------------------------------------------------------------------------------
;	TC1 interrupt service routine
;-------------------------------------------------------------------------------
INTTC1:
	b0bclr	FTC1IRQ

	;Process TC1 timer interrupt here

	jmp	INT_EXIT

;-------------------------------------------------------------------------------
; SysInit
; Initialize I/O, Timer, Interrupt, etc.
;-------------------------------------------------------------------------------
SysInit:

	ret

;-------------------------------------------------------------------------------
; ClrRAM
; Use index @YZ to clear RAM  (00h~7Fh)
;-------------------------------------------------------------------------------

ClrRAM:

; RAM Bank 0
	clr 		Y	    			;Select bank 0 
	mov		A, #0x7F
	b0mov		Z, A				;Set @YZ address from 7fh

ClrRAM10:
	clr 		@YZ				;Clear @YZ content
	decms		Z   				;z = z - 1 , skip next if z=0
	jmp 		ClrRAM10
	clr 		@YZ				;Clear address 0x00

	ret

;-------------------------------------------------------------------------------
	ENDP