/* *	FILE    	SA-1100.h * *	Version 	1.2 *	Author  	Copyright (c) Marc A. Viredaz, 1998 *	        	DEC Western Research Laboratory, Palo Alto, CA *	Date    	January 1998 (April 1997) *	System  	StrongARM SA-1100 *	Language	C or ARM Assembly *	Purpose 	Definition of constants related to the StrongARM *	        	SA-1100 microprocessor (Advanced RISC Machine (ARM) *	        	architecture version 4). This file is based on the *	        	StrongARM SA-1100 data sheet version 2.2. * *//* Be sure that virtual mapping is defined right */#ifndef __ASM_ARCH_HARDWARE_H#error You must include hardware.h not SA-1100.h#endif#include "bitfield.h"/* * Personal Computer Memory Card International Association (PCMCIA) sockets */#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \                	(0x20000000 + (Nb)*PCMCIASp)#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 *//* * Universal Serial Bus (USB) Device Controller (UDC) control registers * * Registers *    Ser0UDCCR 	Serial port 0 Universal Serial Bus (USB) Device *              	Controller (UDC) Control Register (read/write). *    Ser0UDCAR 	Serial port 0 Universal Serial Bus (USB) Device *              	Controller (UDC) Address Register (read/write). *    Ser0UDCOMP	Serial port 0 Universal Serial Bus (USB) Device *              	Controller (UDC) Output Maximum Packet size register *              	(read/write). *    Ser0UDCIMP	Serial port 0 Universal Serial Bus (USB) Device *              	Controller (UDC) Input Maximum Packet size register *              	(read/write). *    Ser0UDCCS0	Serial port 0 Universal Serial Bus (USB) Device *              	Controller (UDC) Control/Status register end-point 0 *              	(read/write). *    Ser0UDCCS1	Serial port 0 Universal Serial Bus (USB) Device *              	Controller (UDC) Control/Status register end-point 1 *              	(output, read/write). *    Ser0UDCCS2	Serial port 0 Universal Serial Bus (USB) Device *              	Controller (UDC) Control/Status register end-point 2 *              	(input, read/write). *    Ser0UDCD0 	Serial port 0 Universal Serial Bus (USB) Device *              	Controller (UDC) Data register end-point 0 *              	(read/write). *    Ser0UDCWC 	Serial port 0 Universal Serial Bus (USB) Device *              	Controller (UDC) Write Count register end-point 0 *              	(read). *    Ser0UDCDR 	Serial port 0 Universal Serial Bus (USB) Device *              	Controller (UDC) Data Register (read/write). *    Ser0UDCSR 	Serial port 0 Universal Serial Bus (USB) Device *              	Controller (UDC) Status Register (read/write). */#define Ser0UDCCR	__REG(0x80000000)  /* Ser. port 0 UDC Control Reg. */#define Ser0UDCAR	__REG(0x80000004)  /* Ser. port 0 UDC Address Reg. */#define Ser0UDCOMP	__REG(0x80000008)  /* Ser. port 0 UDC Output Maximum Packet size reg. */#define Ser0UDCIMP	__REG(0x8000000C)  /* Ser. port 0 UDC Input Maximum Packet size reg. */#define Ser0UDCCS0	__REG(0x80000010)  /* Ser. port 0 UDC Control/Status reg. end-point 0 */#define Ser0UDCCS1	__REG(0x80000014)  /* Ser. port 0 UDC Control/Status reg. end-point 1 (output) */#define Ser0UDCCS2	__REG(0x80000018)  /* Ser. port 0 UDC Control/Status reg. end-point 2 (input) */#define Ser0UDCD0	__REG(0x8000001C)  /* Ser. port 0 UDC Data reg. end-point 0 */#define Ser0UDCWC	__REG(0x80000020)  /* Ser. port 0 UDC Write Count reg. end-point 0 */#define Ser0UDCDR	__REG(0x80000028)  /* Ser. port 0 UDC Data Reg. */#define Ser0UDCSR	__REG(0x80000030)  /* Ser. port 0 UDC Status Reg. */#define UDCCR_UDD	0x00000001	/* UDC Disable                     */#define UDCCR_UDA	0x00000002	/* UDC Active (read)               */#define UDCCR_RESIM	0x00000004	/* Resume Interrupt Mask, per errata */#define UDCCR_EIM	0x00000008	/* End-point 0 Interrupt Mask      */                	        	/* (disable)                       */#define UDCCR_RIM	0x00000010	/* Receive Interrupt Mask          */                	        	/* (disable)                       */#define UDCCR_TIM	0x00000020	/* Transmit Interrupt Mask         */                	        	/* (disable)                       */#define UDCCR_SRM	0x00000040	/* Suspend/Resume interrupt Mask   */                	        	/* (disable)                       */#define UDCCR_SUSIM	UDCCR_SRM	/* Per errata, SRM just masks suspend */#define UDCCR_REM	0x00000080	/* REset interrupt Mask (disable)  */#define UDCAR_ADD	Fld (7, 0)	/* function ADDress                */#define UDCOMP_OUTMAXP	Fld (8, 0)	/* OUTput MAXimum Packet size - 1  */                	        	/* [byte]                          */#define UDCOMP_OutMaxPkt(Size)  	/* Output Maximum Packet size      */ \                	        	/* [1..256 byte]                   */ \                	(((Size) - 1) << FShft (UDCOMP_OUTMAXP))#define UDCIMP_INMAXP	Fld (8, 0)	/* INput MAXimum Packet size - 1   */                	        	/* [byte]                          */#define UDCIMP_InMaxPkt(Size)   	/* Input Maximum Packet size       */ \                	        	/* [1..256 byte]                   */ \                	(((Size) - 1) << FShft (UDCIMP_INMAXP))#define UDCCS0_OPR	0x00000001	/* Output Packet Ready (read)      */#define UDCCS0_IPR	0x00000002	/* Input Packet Ready              */#define UDCCS0_SST	0x00000004	/* Sent STall                      */#define UDCCS0_FST	0x00000008	/* Force STall                     */#define UDCCS0_DE	0x00000010	/* Data End                        */#define UDCCS0_SE	0x00000020	/* Setup End (read)                */#define UDCCS0_SO	0x00000040	/* Serviced Output packet ready    */                	        	/* (write)                         */#define UDCCS0_SSE	0x00000080	/* Serviced Setup End (write)      */#define UDCCS1_RFS	0x00000001	/* Receive FIFO 12-bytes or more   */                	        	/* Service request (read)          */#define UDCCS1_RPC	0x00000002	/* Receive Packet Complete         */#define UDCCS1_RPE	0x00000004	/* Receive Packet Error (read)     */#define UDCCS1_SST	0x00000008	/* Sent STall                      */#define UDCCS1_FST	0x00000010	/* Force STall                     */#define UDCCS1_RNE	0x00000020	/* Receive FIFO Not Empty (read)   */#define UDCCS2_TFS	0x00000001	/* Transmit FIFO 8-bytes or less   */                	        	/* Service request (read)          */#define UDCCS2_TPC	0x00000002	/* Transmit Packet Complete        */#define UDCCS2_TPE	0x00000004	/* Transmit Packet Error (read)    */#define UDCCS2_TUR	0x00000008	/* Transmit FIFO Under-Run         */#define UDCCS2_SST	0x00000010	/* Sent STall                      */#define UDCCS2_FST	0x00000020	/* Force STall                     */#define UDCD0_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */#define UDCWC_WC	Fld (4, 0)	/* Write Count                     */#define UDCDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */#define UDCSR_EIR	0x00000001	/* End-point 0 Interrupt Request   */#define UDCSR_RIR	0x00000002	/* Receive Interrupt Request       */#define UDCSR_TIR	0x00000004	/* Transmit Interrupt Request      */#define UDCSR_SUSIR	0x00000008	/* SUSpend Interrupt Request       */#define UDCSR_RESIR	0x00000010	/* RESume Interrupt Request        */#define UDCSR_RSTIR	0x00000020	/* ReSeT Interrupt Request         *//* * Universal Asynchronous Receiver/Transmitter (UART) control registers * * Registers *    Ser1UTCR0 	Serial port 1 Universal Asynchronous *              	Receiver/Transmitter (UART) Control Register 0 *              	(read/write). *    Ser1UTCR1 	Serial port 1 Universal Asynchronous *              	Receiver/Transmitter (UART) Control Register 1 *              	(read/write). *    Ser1UTCR2 	Serial port 1 Universal Asynchronous *              	Receiver/Transmitter (UART) Control Register 2 *              	(read/write). *    Ser1UTCR3 	Serial port 1 Universal Asynchronous *              	Receiver/Transmitter (UART) Control Register 3 *              	(read/write). *    Ser1UTDR  	Serial port 1 Universal Asynchronous *              	Receiver/Transmitter (UART) Data Register *              	(read/write). *    Ser1UTSR0 	Serial port 1 Universal Asynchronous *              	Receiver/Transmitter (UART) Status Register 0 *              	(read/write). *    Ser1UTSR1 	Serial port 1 Universal Asynchronous *              	Receiver/Transmitter (UART) Status Register 1 (read). * *    Ser2UTCR0 	Serial port 2 Universal Asynchronous *              	Receiver/Transmitter (UART) Control Register 0 *              	(read/write). *    Ser2UTCR1 	Serial port 2 Universal Asynchronous *              	Receiver/Transmitter (UART) Control Register 1 *              	(read/write). *    Ser2UTCR2 	Serial port 2 Universal Asynchronous *              	Receiver/Transmitter (UART) Control Register 2 *              	(read/write). *    Ser2UTCR3 	Serial port 2 Universal Asynchronous *              	Receiver/Transmitter (UART) Control Register 3 *              	(read/write). *    Ser2UTCR4 	Serial port 2 Universal Asynchronous *              	Receiver/Transmitter (UART) Control Register 4 *              	(read/write). *    Ser2UTDR  	Serial port 2 Universal Asynchronous *              	Receiver/Transmitter (UART) Data Register *              	(read/write). *    Ser2UTSR0 	Serial port 2 Universal Asynchronous *              	Receiver/Transmitter (UART) Status Register 0 *              	(read/write). *    Ser2UTSR1 	Serial port 2 Universal Asynchronous *              	Receiver/Transmitter (UART) Status Register 1 (read). * *    Ser3UTCR0 	Serial port 3 Universal Asynchronous *              	Receiver/Transmitter (UART) Control Register 0 *              	(read/write). *    Ser3UTCR1 	Serial port 3 Universal Asynchronous *              	Receiver/Transmitter (UART) Control Register 1 *              	(read/write). *    Ser3UTCR2 	Serial port 3 Universal Asynchronous *              	Receiver/Transmitter (UART) Control Register 2 *              	(read/write). *    Ser3UTCR3 	Serial port 3 Universal Asynchronous *              	Receiver/Transmitter (UART) Control Register 3 *              	(read/write). *    Ser3UTDR  	Serial port 3 Universal Asynchronous *              	Receiver/Transmitter (UART) Data Register *              	(read/write).