//******************************************************************************
//  MSP430x47xx Demo - Comparator A, Poll input CA0, result in P5.1
//
//   Description: The Voltage at pin CA0 (Vcompare) is compared with reference
//   voltage of 0.5*Vcc. LED is toggled when Vcompare crosses the ref voltage.
//
//
//                MSP430x47xx
//             -----------------
//         /|\|                 |
//          | |                 |
//          --|RST      P1.6/CA0|<--Vcompare
//            |                 |
//         <--|CAOUT/P2.6       |
//            |             P5.1|-->LED
//
//  P. Thanigai / K.Venkat
//  Texas Instruments Inc.
//  November 2007
//  Built with CCE Version: 3.2.0 and IAR Embedded Workbench Version: 3.42A
//******************************************************************************
#include  <msp430x47x4.h>

void main(void)
{
  WDTCTL = WDTPW+WDTHOLD;                   // Stop WDT
  FLL_CTL0 |= XCAP14PF;                     // Configure load caps

  CACTL1 = CAON+CAREF_2+CARSEL;             // Enable Comp, ref = 0.5*Vcc
  CACTL2 = P2CA0;                           // Pin to CA0
  CAPD |= CAPD6;                            // Port pin buffer disable
  P5DIR |= BIT1;                            // P5.1 = output direction
  P2SEL |= BIT6;                            // P2.6 = CAOUT
  while(1)
    if (CAOUT&CACTL2)
      P5OUT |= 0x002;                       // Set LED if result =1
    else
      P5OUT &= ~0x002;                      // Clear LED if result =0
}