//******************************************************************************
//   MSP430x47xx Demo - USCI_A0, 115200 UART Echo ISR, DCO SMCLK, LPM3
//
//   Description: Echo a received character, RX ISR used. Normal mode is LPM3.
//   Automatic clock activation for SMCLK through the USCI is demonstrated.
//   USCI_A0 RX interrupt triggers TX Echo.
//   Baud rate divider with 1048576hz = 1048576/115200 = ~9.1 (009h|01h)
//   ACLK = LFXT1 = 32768Hz, MCLK = SMCLK = default DCO = 32 x ACLK = 1048576Hz
//   //* An external watch crystal between XIN & XOUT is required for ACLK *//	
//
//               MSP430x47xx
//             -----------------
//         /|\|              XIN|-
//          | |                 | 32kHz
//          --|RST          XOUT|-
//            |                 |
//            |     P2.4/UCA0TXD|------------>
//            |                 | 115200 - 8N1
//            |     P2.5/UCA0RXD|<------------
//
//
//  P. Thanigai / K.Venkat
//  Texas Instruments Inc.
//  November 2007
//  Built with CCE Version: 3.2.0 and IAR Embedded Workbench Version: 3.42A
//******************************************************************************
#include  "msp430x47x4.h"

void main(void)
{
 volatile unsigned int i;

  WDTCTL = WDTPW+WDTHOLD;                   // Stop WDT
  FLL_CTL0 |= XCAP14PF;                     // Configure load caps

  do
  {
  IFG1 &= ~OFIFG;                           // Clear OSCFault flag
  for (i = 0x47FF; i > 0; i--);             // Time for flag to set
  }
  while ((IFG1 & OFIFG));                   // OSCFault flag still set?

  P2SEL |= BIT4+BIT5;                            // P2.4,5 = USCI_A0 RXD/TXD
  UCA0CTL1 |= UCSSEL_2;                     // SMCLK
  UCA0BR0 = 0x09;                           // 1MHz 115200
  UCA0BR1 = 0x00;                           // 1MHz 115200
  UCA0MCTL = 0x02;                          // Modulation
  UCA0CTL1 &= ~UCSWRST;                     // **Initialize USCI state machine**
  IE2 |= UCA0RXIE;                          // Enable USCI_A0 RX interrupt

  __bis_SR_register(LPM3_bits + GIE);       // Enter LPM4, interrupts enabled
}

// Echo back RXed character, confirm TX buffer is ready first
#pragma vector=USCIAB0RX_VECTOR
__interrupt void USCI0RX_ISR(void)
{
  while (!(IFG2&UCA0TXIFG));                // USCI_A0 TX buffer ready?
  UCA0TXBUF = UCA0RXBUF;                    // TX -> RXed character
}