::=  { ibmappnNodeLsEntry 13 }  ibmappnNodeLsMaxSendBtuSize  OBJECT-TYPE        SYNTAX INTEGER        ACCESS read-only        STATUS mandatory        DESCRIPTION             "Numeric value between 0 and 32767 inclusive indicating              the desired number of bytes in a Basic Transmission Unit              (BTU) that can be sent on this TG.              This is an administratively assigned value."        ::=  { ibmappnNodeLsEntry 14 }  ibmappnNodeLsEffCap   OBJECT-TYPE        SYNTAX INTEGER        ACCESS read-only        STATUS mandatory        DESCRIPTION            "The effective capacity is an integer value that indicates             the kilo bits per second.             It is derived from the link bandwidth and maximum load             factor with the range of 0 thru 603,979,776.             This is an administratively assigned value associated             with the TG using this link station."        ::=  { ibmappnNodeLsEntry 15 }  ibmappnNodeLsConnCost OBJECT-TYPE        SYNTAX INTEGER (0..255)        ACCESS read-only        STATUS mandatory        DESCRIPTION            "Cost per connect time: a value representing             the relative cost per unit of time to use             the TG. Range is from 0, which means no cost,             to 255, which indicates maximum cost.             This is an administratively assigned value associated             with the TG using this link station."        ::=  { ibmappnNodeLsEntry 16 }  ibmappnNodeLsByteCost  OBJECT-TYPE        SYNTAX INTEGER (0..255)        ACCESS read-only        STATUS mandatory        DESCRIPTION            "Relative cost of transmitting a byte over this link.             Range is from 0 (lowest cost) to 255.             This is an administratively assigned value associated             with the TG using this link station."        ::=  { ibmappnNodeLsEntry 17 }  ibmappnNodeLsSecurity  OBJECT-TYPE        SYNTAX INTEGER {                       nonsecure(1),                --X'01'                       publicSwitchedNetwork(32),   --X'20'                       undergroundCable(64),        --X'40'                       secureConduit(96),           --X'60'                       guardedConduit(128),         --X'80'                       encrypted(160),              --X'A0'                       guardedRadiation(192)        --X'C0'               }        ACCESS read-only        STATUS mandatory        DESCRIPTION            "The security is represented as an integer with a range of             1 thru 255 with the most common values enumerated as             defined above.             This is an administratively assigned value associated             with the TG using this link station."        ::=  { ibmappnNodeLsEntry 18 }  ibmappnNodeLsDelay  OBJECT-TYPE        SYNTAX INTEGER {                       minimum(0),                 --X'00'                       negligible(384),            --X'4C'                       terrestrial(9216),          --X'71'                       packet(147456),             --X'91'                       long(294912),               --X'99'                       maximum(2013265920)         --X'FF'               }        ACCESS read-only        STATUS mandatory        DESCRIPTION             "Relative amount of time that it takes for a signal to              travel the length of the logical link.  This time is              represented in micro seconds, with some of the more              common values enumerated.              This is an administratively assigned value associated              with the TG using this link station."        ::=  { ibmappnNodeLsEntry 19 }  ibmappnNodeLsUsr1  OBJECT-TYPE        SYNTAX INTEGER (0..255)        ACCESS read-only        STATUS mandatory        DESCRIPTION            "First user-defined TG characteristic for this TG with             a range of 0-255.             This is an administratively assigned value associated             with the TG using this link station."        ::=  { ibmappnNodeLsEntry 20 }  ibmappnNodeLsUsr2  OBJECT-TYPE        SYNTAX INTEGER (0..255)        ACCESS read-only        STATUS mandatory        DESCRIPTION            "Second user-defined TG characteristic for this TG with             a range of 0-255.             This is an administratively assigned value associated             with the TG using this link station."        ::=  { ibmappnNodeLsEntry 21 }  ibmappnNodeLsUsr3  OBJECT-TYPE        SYNTAX INTEGER (0..255)        ACCESS read-only        STATUS mandatory        DESCRIPTION            "Third user-defined TG characteristic for this TG with             a range of 0-255.             This is an administratively assigned value associated             with the TG using this link station."        ::=  { ibmappnNodeLsEntry 22 }  ibmappnNodeLsInXidBytes OBJECT-TYPE        SYNTAX Counter        ACCESS read-only        STATUS mandatory        DESCRIPTION             "Number of XID bytes received."        ::=  { ibmappnNodeLsEntry 23 }  ibmappnNodeLsInMsgBytes OBJECT-TYPE        SYNTAX Counter        ACCESS read-only        STATUS mandatory        DESCRIPTION             "Number of message (I-frame) bytes received."        ::=  { ibmappnNodeLsEntry 24 }  ibmappnNodeLsInXidFrames OBJECT-TYPE        SYNTAX Counter        ACCESS read-only        STATUS mandatory        DESCRIPTION             "Number of XID frames received."        ::=  { ibmappnNodeLsEntry 25 }  ibmappnNodeLsInMsgFrames OBJECT-TYPE        SYNTAX Counter        ACCESS read-only        STATUS mandatory        DESCRIPTION             "Number of message (I-frame) frames received."        ::=  { ibmappnNodeLsEntry 26 }  ibmappnNodeLsOutXidBytes OBJECT-TYPE        SYNTAX Counter        ACCESS read-only        STATUS mandatory        DESCRIPTION             "Number of XID bytes sent."        ::=  { ibmappnNodeLsEntry 27 }  ibmappnNodeLsOutMsgBytes OBJECT-TYPE        SYNTAX Counter        ACCESS read-only        STATUS mandatory        DESCRIPTION             "Number of message (I-frame) bytes sent."        ::=  { ibmappnNodeLsEntry 28 }  ibmappnNodeLsOutXidFrames OBJECT-TYPE        SYNTAX Counter        ACCESS read-only        STATUS mandatory        DESCRIPTION             "Number of XID frames sent."        ::=  { ibmappnNodeLsEntry 29 }  ibmappnNodeLsOutMsgFrames OBJECT-TYPE        SYNTAX Counter        ACCESS read-only        STATUS mandatory        DESCRIPTION             "Number of message (I-frame) frames sent."        ::=  { ibmappnNodeLsEntry 30 }  ibmappnNodeLsEchoRsps     OBJECT-TYPE        SYNTAX Counter        ACCESS read-only        STATUS mandatory        DESCRIPTION             "Number of responses returned from adjacent link station.              A response should be returned for each test frame sent by              this node.              Test frames are sent to adjacent nodes periodically to              verify connectivity and to measure that actual round trip              time, that is the time the test frame is sent until the              response is received."        ::=  { ibmappnNodeLsEntry 31 }  ibmappnNodeLsCurrentDelay  OBJECT-TYPE        SYNTAX INTEGER        ACCESS read-only        STATUS mandatory        DESCRIPTION             "The time that it took for the last test signal to be              sent and returned from this link station to the              adjacent links station.              This time is represented in milliseconds."        ::=  { ibmappnNodeLsEntry 32 }  ibmappnNodeLsMaxDelay      OBJECT-TYPE        SYNTAX INTEGER        ACCESS read-only        STATUS mandatory        DESCRIPTION             "The longest time it took for a test signal              to be sent and returned from this link station to the              adjacent links station.              This time is represented in milliseconds ."        ::=  { ibmappnNodeLsEntry 33 }  ibmappnNodeLsMinDelay      OBJECT-TYPE        SYNTAX INTEGER        ACCESS read-only        STATUS mandatory        DESCRIPTION             "The shortest time it took for a test signal              to be sent and returned from this link station to the              adjacent links station.              This time is represented in milliseconds."        ::=  { ibmappnNodeLsEntry 34 }  ibmappnNodeLsMaxDelayTime  OBJECT-TYPE        SYNTAX TimeTicks        ACCESS read-only        STATUS mandatory        DESCRIPTION             "The time (since system up in hundredth of seconds)              when the longest delay occurred.              This time can be used to identify when this high              water mark occurred in relation to the last initialization              of the APPN node."        ::=  { ibmappnNodeLsEntry 35 }  ibmappnNodeLsGoodXids    OBJECT-TYPE      SYNTAX  Counter      ACCESS  read-only      STATUS  mandatory      DESCRIPTION              "The total number of successful XIDs that have occurred               on this link station since the time it was started."        ::=  { ibmappnNodeLsEntry 36 }  ibmappnNodeLsBadXids    OBJECT-TYPE      SYNTAX  Counter      ACCESS  read-only      STATUS  mandatory      DESCRIPTION              "The total number of unsuccessful XIDs that have occurred               on this link station since the time it was started."        ::=  { ibmappnNodeLsEntry 37 }  ibmappnNodeLsSpecific  OBJECT-TYPE        SYNTAX OBJECT IDENTIFIER        ACCESS read-only        STATUS mandatory        DESCRIPTION             "Identifies the DLC specific OBJECT IDENTIFIER              that can provide additional information."        ::=  { ibmappnNodeLsEntry 38 }  ibmappnNodeLsSubState     OBJECT-TYPE        SYNTAX INTEGER    {                           inactive(1),                           sentReqOpnstn(2),                           pendXidExch(3),                           sentActAs(4),                           sentSetMode(5),                           active(6),                           sentDeactAsOrd(7),                           sentDiscOrd(8),                           sentDestroyTg(9),                           sentCreateTg(10),                           sentConnReq(11),                           pendRcvConnInd(12),                           pendSendConnRsp(13),                           sentConnRsp(14),                           pendDeact(15)                           }        ACCESS read-only        STATUS mandatory        DESCRIPTION             "State of this link station."        ::=  { ibmappnNodeLsEntry 39 }  ibmappnNodeLsStartTime     OBJECT-TYPE        SYNTAX TimeTicks        ACCESS read-only        STATUS mandatory        DESCRIPTION             "The time (in hundredth of seconds) this link station              has been active the last time since the time APPN was              initialized."        ::=  { ibmappnNodeLsEntry 40 }  ibmappnNodeLsActiveTime    OBJECT-TYPE        SYNTAX TimeTicks        ACCESS read-only        STATUS mandatory        DESCRIPTION             "The time (in hundredth of seconds) this link station              has been in the active state.              A zero value indicates the link station has never been              active."        ::=  { ibmappnNodeLsEntry 41 }  ibmappnNodeLsCurrentStateTime  OBJECT-TYPE        SYNTAX TimeTicks        ACCESS read-only        STATUS mandatory        DESCRIPTION             "The time (in hundredth of seconds) the link station is              in the current state."        ::=  { ibmappnNodeLsEntry 42 }  -- **************************************************************  -- Link station table (TCP/IP specific)  --  ibmappnNodeLsIpTable OBJECT-TYPE        SYNTAX SEQUENCE OF IbmappnNodeLsIpEntry        ACCESS not-accessible        STATUS mandatory        DESCRIPTION            "Link station table (TCP/IP specific)."        ::= { ibmappnLinkStationInformation 2 }  ibmappnNodeLsIpEntry OBJECT-TYPE        SYNTAX IbmappnNodeLsIpEntry        ACCESS not-accessible        STATUS mandatory        DESCRIPTION             "The IP Name is used as the index to this table."        INDEX               {ibmappnNodeLsIpName }        ::= { ibmappnNodeLsIpTable 1 }  IbmappnNodeLsIpEntry ::= SEQUENCE {        ibmappnNodeLsIpName             DisplayString,        ibmappnNodeLsIpState            INTEGER,        ibmappnNodeLsLocalIpAddr        IpAddress,        ibmappnNodeLsLocalIpPortNum     INTEGER,        ibmappnNodeLsRemoteIpAddr       IpAddress,        ibmappnNodeLsRemoteIpPortNum    INTEGER                                     }  ibmappnNodeLsIpName OBJECT-TYPE        SYNTAX DisplayString (SIZE (1..8))        ACCESS read-only        STATUS mandatory        DESCRIPTION            "Administratively-assigned name for this link station. The             name can be from one to eight characters."        ::=  { ibmappnNodeLsIpEntry 1 }  ibmappnNodeLsIpState        OBJECT-TYPE        SYNTAX INTEGER    {                           inactive(1),