?? releasenote.txt
字號:
================== FlashTool v3.1.04.02 (2007/03/18) ==================
Bug fixes:
1. Fix that DA cannot be loaded on MT6225 for exceeding internal SRAM size.
2. Fix that NAND download/read-back issue on MT6225 because buffer is linked on TCM.
New features:
N/A
Enhancements:
1. [DA] Modify custom.bat/custom.mak/AddDAInfo_CUSTOM_AllInOne_DA.ini for MT6223
================== FlashTool v3.1.04 (2007/03/12) ==================
Bug fixes:
1. [DA] Fix complete mapping table in ENFB on 512 Bytes/Page
New features:
1. [DA] Supports new NOR Flash device
[SAMSUNG] K5L2731CAM
[SAMSUNG] K5L2931CAM
[SPANSION] S71PL127J
[TOSHIBA] TY00689002APGN
[SPANSION] S29GL064A_T
[SPANSION] S29GL064A_B
2. [DA] Supports OTP driver for below NOR Flash device
[SPANSION] NOR_S71WS256N
[SPANSION] S71WS128NB0BFWAN3
Enhancements:
1. [FlashTool/BROM_DLL/DA] Auto-Format when enabling System_Drive_On_NAND
2. [FlashTool] Show Parameter List View automatically when loading secure-on MAUI
3. [FlashTool] Move "Paremeter"/ "File Management"/ "ROM Writer" under "Window" menu item
4. [FlashTool] Show DA version and Build Date in help dialog
5. [BROM DLL] Add a configure for SW_MISC_L
6. [DA] Rename old NOR Flash device
[SPANSION] S71WS128NB0BFWAN3 --> S29WS128N
[SPANSION] S71WS256N --> S29WS256N
[SPANSION] S71WS512PD0HF3HR --> S29WS512P
[SPANSION] S29GL128NH --> S29GL128N_T
[SPANSION] S29GL128NL --> S29GL128N_B
[SPANSION] S29GL256NH --> S29GL256N_T
[SPANSION] S29GL256NL --> S29GL256N_B
[SPANSION] S29GL512NH --> S29GL512N_T
[SPANSION] S29GL512NL --> S29GL512N_B
================== FlashTool v3.1.03 (2007/01/02) ==================
Bug fixes:
1. [DA] Fix a progress bar overflow on 512Mb NOR Flash Format.
New features:
1. [BROM_DLL/DA] Support FOTA(Firmware update Over The Air) download.
2. [BROM_DLL/DA] Support MT6223 download.
3. [BROM_DLL/DA] Support MT6268T download.
4. [DA] Supports new NOR Flash device
[SPANSION] S29GL128NH
[SPANSION] S29GL128NL
[SPANSION] S29GL256NH
[SPANSION] S29GL256NL
[SPANSION] S29GL512NH
[SPANSION] S29GL512NL
Enhancements:
1. [DA] Support BBC(Blank Block Check) for NOR Flash Format.
2. [BROM_DLL/DA] Support Retransmit mechanism for NAND Readback operation.
3. [BROM_DLL] Enhance E-NFB Check.
================== FlashTool v3.1.02 (2006/11/01) ==================
Bug fixes:
1. [DA] Fix DetectExtDRAM() detection fail when NOR_FLASH_NO_FOUND
2. [DA] Fix POST_PROCESS_FAIL when MAC on Boundary occured at WriteSectors/ReadSectors/EraseSectors
3. [BROM_DLL] Fix Access Violation when BL_HANDLE AutoLoad at ExtractBaseDir()
New features:
1. [BROM_DLL/DA] E-NFB (Enhanced NFB) Download.
2. [DA] MT6225 NOR Flash Booting, can change baud rate up to 921600
3. [DA] MT6225 NFB, modify PLL setting flow
4. [DA] Supports new NOR Flash device (AD-Mux)
[SPANSION] S29NS064N
[SPANSION] S29NS128N
[SPANSION] S29NS256N
5. [DA] Supports new NOR flash device.
[ST] M58PPR256J
[ST] M58PPR512J
[SST] SST32HF3241C
[SPANSION] S71WS128NB0BFWAN3
[SPANSION] S71WS256N
[SPANSION] S71WS512PD0HF3HR
Enhancements:
1. [BROM_DLL] Incress 1st download Pre-process timeout period.
2. [FlashTool] Check SEC_RO/Security Setting/OTP checked-box and filename.
3. [Security] Authentication File for 6225/6226C/6229E4
TEST_AUTH_MTK_6225.auth
TEST_AUTH_MTK_6226C.auth
TEST_AUTH_MTK_6229E4.auth
================== FlashTool v3.1.01 (2006/09/27) ==================
Bug fixes:
1. [BROM_DLL] Fix DL_LoadScatter remote load file callback failed.
2. [DA] Fix INT_SYSRAM detection failure in MT6226, MT6227, MT6226M and MT6225. Using fixed pre-defined size table instead.
3. [DA] Fix TEST_Write() failure at Flash high-address-bus test, the ret data type should be STATUS_E.
New features:
1. [BROM_DLL/FlashTool] Add DA_SetDefaultStartAddr to assign non-standard DA's start address.
2. [BROM_DLL/DA] New MultipleDA mechanism to auto-download corresponding DA according to baseband chip type.
3. [BROM_DLL/DA] Support MT6225, MT6230 baseband chip.
4. [BROM_DLL] New DLL versioning mechanism.
5. [BROM_DLL] Modify Brom_DownloadData to allow multiple blocks download.
Enhancements:
1. [BROM_DLL] DL_AutoLoadByScatRegionName auto-load *.bin file into ROM entry only when scatter file has single load region.
2. [BROM_DLL] Add const qualifier in CALLBACK_REMOTE_GET_FILE_LEN, CALLBACK_REMOTE_READ_FILE and CALLBACK_FILE_INTEGRITY_CHECK.
3. [BROM_DLL] Change BRom_WriteBuf packet length to 1024 bytes.
================== FlashTool v3.1.00 (2006/08/17) ==================
Bug fixes:
1. [DA] Allow multi-bin download for 512KB external ram MCP.
New features:
1. [FlashTool/BROM_DLL/DA] MTK Security Platform support.
2. [FlashTool/BROM_DLL/DA] Provide OTP Read/Write/Lock Operations.
3. [FlashTool/BROM_DLL/DA] Provide a method to retrieve Exception Log.
4. [BROM_DLL/DA] Compare project id between main code and jump table.
5. [BROM_DLL/DA] Detect NOR and NAND flash at the same time.
6. [BROM_DLL] Add AUTO_DETECT_BBCHIP and AUTO_DETECT_EXT_CLOCK option to separate BBCHIP and EXT_CLOCK auto-detection.
7. [BROM_DLL] Export FlashTool APIs.
8. [BROM_DLL] Load brom.ini from brom.dll loading path, not application loading path.
9. [BROM_DLL] Add new function GetBromDLLInfo().
Enhancements:
1. [BROM_DLL/DA] Integrate BROM_DLL and DA's error code into mtk_status.h.
2. [BROM_DLL/DA] Detect DRAM after DA is connnected.
================== FlashTool v2.9.1004 (2006/08/11) ==================
Bug fixes:
1. [BROM_DLL] Rollback BootROM read timeout to original 20ms in auto-boot mode, because some handset is very hard to connect under 4ms timeout.
2. [BROM_DLL] Fix Test DA download fail on MT6205/MT6205B.
3. [DA] Fix a Program fail When testing high address bug for flash.
New features:
N/A
Enhancements:
N/A
================== FlashTool v2.9.1003 (2006/08/09) ==================
Bug fixes:
1. [BROM_DLL] Fix Format/Readback fail on MT6205/MT6205B.
New features:
N/A
Enhancements:
N/A
================== FlashTool v2.9.1002 (2006/07/21) ==================
Bug fixes:
1. [BROM_DLL] Fix DA download error on MT6205/MT6205B.
2. [DA] Fix TestDA TEST_Write() fail in address bus test.
New features:
N/A
Enhancements:
N/A
================== FlashTool v2.9.1001 (2006/05/25) ==================
Bug fixes:
N/A
New features:
1. [FlashTool/BROM_DLL] Support Multi-Load Autodetection Download.
Enhancements:
N/A
================== FlashTool v2.8.1001 (2006/05/23) ==================
Bug fixes:
1. [DA] Fix a bug for wrong information about S71PL129N in Flash Device Table.
2. [DA] Fix a bug for Software Unlock Command Sequence wrong block address in Renesas driver. Within 64Mb, DQ7 in block address is fixed 0.
3. [FlashTool] Fix a bug to prevent Scroll back to Page1 when redrawing Test DA message.
4. [DA/BROM_DLL] Fix a bug for manually format failure on MT6228 NFB EVB.
New features:
1. [FlashTool/BROM_DLL/DA] Support 6229 Download, add m_emi_gen_c in DRAM setting
2. [DA] Support High-Address-Bus pins test for NOR Flash.
3. [DA] Supports new NOR flash device.
[SHARP] LRS18BK
[INTEL] 28F3204C3TD70, [MemoCom] KS03204
4. [DA] Supports new NAND flash device.
[TOSHIBA] TC58NWM9S3B
Enhancements:
N/A
================== FlashTool v2.7.1017 (2006/03/31) ==================
Bug fixes:
1. [DA] Fix download failure for a binary that is smaller than sector size (eg. 8KB).
2. [DA] Fix <<<RAM_BEGIN>>> and <<<RAM_END>>> pattern interfere with INTEL Sibley/Woodmere flash in DetectExtRAM().
3. [DA] Fix RENESAS superAND format validation failure problem.
4. [BROM_DLL] Set BootROM read timeout to 4ms to increase start command hit rate in auto-boot mode.
5. [BROM_DLL] Fix FAT range information doesn't store in DA_REPORT_T structure.
6. [BROM_DLL] Fix return code error. Detected a hardware failure, but returned the wrong failure return code "SOC check failure".
7. [FlashTool] Use known BBCHIP_TYPE and EXT_CLOCK to increase start command hit rate in "Reset to Factory Default" procedure.
New features:
1. [BROM_DLL] Highly increasing BootROM baudrate to 115200 by baseband chip UART auto-baud feature.
2. [DA] Supports SST family NOR flash device.
[SST] SST34HF16x1
[SST] SST34HF32x4
Enhancements:
N/A
================== FlashTool v2.7.1016 (2006/03/08) ==================
Bug fixes:
1. [BROM_DLL] Stop sending DA_FINISH_CMD command when DA_ENABLE_WATCHDOG_CMD is issued.
2. [BROM_DLL] Using local DA_REPORT_T variable to avoid multithread unsafe problem.
New features:
1. [DA] Support RENESAS superAND flash read back and format operation.
2. [FlashTool&BROM_DLL] Auto-load bin files under scatter file's directory when scatter file is selected.
3. [BROM_DLL] Add DA_LoadByFilepathEx() and DA_LoadEx() to bypass DA validation.
4. [DA] Supports new NOR flash device.
[INTEL] PF48F50xxM0x1xx
[INTEL] PF48F40xxM0x0xx
[INTEL] PF48F40xxM0x1xx
5. [DA] Supports new NAND flash device.
[MICRON] MT29F2G08AAC
[MICRON] MT29F4G08BAB
[RENESAS] superAND 512Mb/8bits
[RENESAS] superAND 512Mb/16bits
[Infineon] HYF33DS51280
[Infineon] HYF33DS1G80
[Infineon] HYF33DS1G16
Enhancements:
1. [BROM_DLL] Dump BootROM start cmd sequence in debug log.
================== FlashTool v2.7.1015 (2006/01/14) ==================
Bug fixes:
1. [FlashTool] Fix scatter file path doesn't update on UI.
2. [BROM_DLL&DA] Workaround reading DSP version failure issue in some production lines, rollback to the old method for reading DSP version.
3. [DA] Fix SHARP LH28F16 flash download fail problem.
New features:
1. [DA] Supports INTEL Sibley family flash.
2. [DA] Supports new NOR flash device.
[INTEL] PF38F5050M0XXXX
Enhancements:
1. [FlashTool] Record normal mode and test mode DA path separatedly.
2. [BROM_DLL&DA] Enhance DA_FINISH_CMD protocol by adding ACK and delay.
3. [BROM_DLL] Dump debug log in BootROM write cmd.
4. [BROM_DLL] Modify timeout mechanism for more reasonable in DA_cmd::WriteData() and DA_cmd::WriteData().
5. [BROM_DLL] Modify power key latch sequence and clear RTC alarm mask to enhance stability.
6. [DA] Remove unnecessary floating point code to reduce size in FlashTest_DA.bin.
================== FlashTool v2.7.1014 (2006/01/04) ==================
Bug fixes:
1. [FlashTool] Fix NFI CS1 device takes no effect problem while selecting "enable NFI-CS1" flag.
2. [BROM_DLL] Fix 2GB NAND flash size display errror.
3. [DA] Fix Spansion S71PLXXXN detection problem by reading CFI info.
4. [DA] Fix TOSHIBA NAND flash callback function set, because TOSHIBA NAND flash doesn't support CopyBack command.
New features:
1. [DA] Supports Spansion MirrorBit Buffer-Program method.
2. [DA] Supports new NOR flash device.
[SPANSION] S71PL129N
Enhancements:
1. [DA] Halt program when external RAM is less than 128KB.
================== FlashTool v2.7.1013 (2005/12/29) ==================
Bug fixes:
1. [BROM_DLL] Fix BootROM start command failure while manually selecting MT6226 or MT6227 baseband chip.
2. [BROM_DLL] Access violation while loading a file smaller than 1MB.
3. [BROM_DLL] Fix timeout period inconsistent between baseband chip auto-detection and manual-detection methods.
4. [BROM_DLL] Fix SID bug, different baseband chips with the same SID should stop download.
5. [DA] Fix Single-Bank-Flash insufficient backup buffer problem.
New features:
1. [FlashTool] Add download history feature.
2. [BROM_DLL] Support new baseband chip MT6226M.
3. [BROM_DLL] Add UsbComPortEnumerate() function for USB COM port enumeration.
4. [DA] Supports new NOR flash device.
[SPANSION] S71PL127N
[SILICON7] SV6D2832UTA
[SILICON7] SV6D2832UBA
[SILICON7] SV6C2832UTA
[SILICON7] SV6C2832UBA
[SHARP] LH28F16
[TOSHIBA] TV00578002DABD
[TOSHIBA] TV00578003DABD
[SPANSION] S71PL256N
5. [DA] Supports new NAND flash device.
[TOSHIBA] TH58NVG1S8BFT
Enhancements:
1. [BROM_DLL] Modify debug log time format to millisecond accuracy.
2. [DA] Add pre-process callback function to unlock all the blocks to meet ST NAND flash requirement.
================== FlashTool v2.7.1012 (2005/11/24) ==================
Bug fixes:
1. [BROM_DLL][BUG FIX] Cannot recognize 05B ROM_INFO header.
2. [DA][BUG FIX] Incorrectly detects S71PL127JXX as S71PL254JXX because da_memcmp() cannot work probably.
3. [DA][BUG FIX] Add NUTL_VERIFY_AFTER_PROGRAM flash to perform read back verification after program operation.
New features:
N/A
Enhancements:
N/A
================== FlashTool v2.7.1011 (2005/11/19) ==================
Bug fixes:
1. [BROM_DLL&DA][BUG FIX] Fix RTC date-time value could not be initialized problem.
2. [DA][BUF FIX] Refill BootLoader header for BootROM to identify NAND flash organization.
New features:
1. [BROM_DLL&DA][New] Add UID Secure Booting feature.
2. [DA][New] Supports new NOR flash device.
[INTEL] 38F1010C0ZBL0
[INTEL] 28F1602C3BD70
[TOSHIBA] TY0068B012APGG
[TOSHIBA] TY0068B013APGG
3. [DA][New] Supports new NAND flash device.
[HYNIX] HY27UF081G2M
Enhancements:
N/A
================== FlashTool v2.7.1010 (2005/10/25) ==================
Bug fixes:
1. [DA][BUG FIX] Fix wrong start block address of 2nd binary for new NFB architecture.
New features:
N/A
Enhancements:
1. [BROM_DLL][Enhance] Always fix BootROM start command read timeout to 20ms to bypass start command failure problem.
================== FlashTool v2.7.1009 (2005/10/19) ==================
Bug fixes:
N/A
New features:
1. [BROM_DLL&DA][New] Support new NFB architecture from w05.42, incompatible with any NFB load earlier then w05.42.
Enhancements:
N/A
================== FlashTool v2.7.1008 (2005/10/19) ==================
Bug fixes:
N/A
New features:
1. [BROM_DLL&DA][New] New H/W devices detection architecture including NOR, NAND, SRAM and DRAM detection.
2. [BROM_DLL&DA][New] DA partial download technic, that overcomes DA size exceeds MT6205B internal SRAM (32KB).
3. [BROM_DLL&DA][New] Format verification option, each byte should be 0xFF after erasure.
4. [BROM_DLL&DA][New] DA validation to ensure invalid binary could not be loaded.
5. [BROM_DLL&DA][New] Support NFB download.
6. [BROM_DLL&DA][New] Support NAND flash format with 3 method, NORMAL, FORCEDLY ERASE and MARK AS BAD BLOCK.
7. [BROM_DLL&DA][New] Support NAND flash read back with 4 methods, PAGE+ECC, PAGE ONLY, SPARE ONLY and PAGE+SPARE.
Enhancements:
N/A
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -