## (C) Copyright 2003-2006# Wolfgang Denk, DENX Software Engineering, wd@denx.de.## See file CREDITS for list of people who contributed to this# project.## This program is free software; you can redistribute it and/or# modify it under the terms of the GNU General Public License as# published by the Free Software Foundation; either version 2 of# the License, or (at your option) any later version.## This program is distributed in the hope that it will be useful,# but WITHOUT ANY WARRANTY; without even the implied warranty of# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the# GNU General Public License for more details.## You should have received a copy of the GNU General Public License# along with this program; if not, write to the Free Software# Foundation, Inc., 59 Temple Place, Suite 330, Boston,# MA 02111-1307 USA## File: drivers/net/sk98lin/Makefile## Makefile for the SysKonnect SK-98xx device driver.#include $(TOPDIR)/config.mkLIB	:= $(obj)libsk98lin.aCOBJS-$(CONFIG_SK98) += skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o \	skgesirq.o ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o \	skvpd.o skxmac2.o skcsum.o#COBJS-y += skproc.oCOBJS-$(CONFIG_SK98) += uboot_skb.o uboot_drv.oCOBJS	:= $(COBJS-y)SRCS	:= $(COBJS:.o=.c)OBJS	:= $(addprefix $(obj),$(COBJS))# DBGDEF =  \# -DDEBUGifdef DEBUGDBGDEF +=  \-DSK_DEBUG_CHKMOD=0x00000000L \-DSK_DEBUG_CHKCAT=0x00000000Lendif# **** possible debug modules for SK_DEBUG_CHKMOD *****************# SK_DBGMOD_MERR        0x00000001L     /* general module error indication */# SK_DBGMOD_HWM         0x00000002L     /* Hardware init module */# SK_DBGMOD_RLMT        0x00000004L     /* RLMT module */# SK_DBGMOD_VPD         0x00000008L     /* VPD module */# SK_DBGMOD_I2C         0x00000010L     /* I2C module */# SK_DBGMOD_PNMI        0x00000020L     /* PNMI module */# SK_DBGMOD_CSUM        0x00000040L     /* CSUM module */# SK_DBGMOD_ADDR        0x00000080L     /* ADDR module */# SK_DBGMOD_DRV         0x00010000L     /* DRV module */# **** possible debug categories for SK_DEBUG_CHKCAT **************# *** common modules ***# SK_DBGCAT_INIT        0x00000001L     module/driver initialization# SK_DBGCAT_CTRL        0x00000002L     controlling: add/rmv MCA/MAC and other controls (IOCTL)# SK_DBGCAT_ERR         0x00000004L     error handling paths# SK_DBGCAT_TX          0x00000008L     transmit path# SK_DBGCAT_RX          0x00000010L     receive path# SK_DBGCAT_IRQ         0x00000020L     general IRQ handling# SK_DBGCAT_QUEUE       0x00000040L     any queue management# SK_DBGCAT_DUMP        0x00000080L     large data output e.g. hex dump# SK_DBGCAT_FATAL       0x00000100L     large data output e.g. hex dump# *** driver (file skge.c) ***# SK_DBGCAT_DRV_ENTRY           0x00010000      entry points# SK_DBGCAT_DRV_???             0x00020000      not used# SK_DBGCAT_DRV_MCA             0x00040000      multicast# SK_DBGCAT_DRV_TX_PROGRESS     0x00080000      tx path# SK_DBGCAT_DRV_RX_PROGRESS     0x00100000      rx path# SK_DBGCAT_DRV_PROGRESS        0x00200000      general runtime# SK_DBGCAT_DRV_???             0x00400000      not used# SK_DBGCAT_DRV_PROM            0x00800000      promiscuous mode# SK_DBGCAT_DRV_TX_FRAME        0x01000000      display tx frames# SK_DBGCAT_DRV_ERROR           0x02000000      error conditions# SK_DBGCAT_DRV_INT_SRC         0x04000000      interrupts sources# SK_DBGCAT_DRV_EVENT           0x08000000      driver eventsEXTRA_CFLAGS += -I. -DSK_USE_CSUM $(DBGDEF)CFLAGS += $(EXTRA_CFLAGS)HOST_CFLAGS += $(EXTRA_CFLAGS)all:	$(LIB)$(LIB):	$(obj).depend $(OBJS)	$(AR) $(ARFLAGS) $@ $(OBJS)########################################################################## defines $(obj).depend targetinclude $(SRCTREE)/rules.mksinclude $(obj).depend#########################################################################