/****************************************************************************** * * Name:	skgehw.h * Project:	GEnesis, PCI Gigabit Ethernet Adapter * Version:	$Revision: 1.49 $ * Date:	$Date: 2003/01/28 09:43:49 $ * Purpose:	Defines and Macros for the Gigabit Ethernet Adapter Product Family * ******************************************************************************//****************************************************************************** * *	(C)Copyright 1998-2003 SysKonnect GmbH. * *	This program is free software; you can redistribute it and/or modify *	it under the terms of the GNU General Public License as published by *	the Free Software Foundation; either version 2 of the License, or *	(at your option) any later version. * *	The information in this file is provided "AS IS" without warranty. * ******************************************************************************//****************************************************************************** * * History: * $Log: skgehw.h,v $ * Revision 1.49  2003/01/28 09:43:49  rschmidt * Added defines for PCI-Spec. 2.3 IRQ * Added defines for CLK_RUN (YUKON-Lite) * Editorial changes * * Revision 1.48  2002/12/05 10:25:11  rschmidt * Added defines for Half Duplex Burst Mode On/Off * Added defines for Rx GMAC FIFO Flush feature * Editorial changes * * Revision 1.47  2002/11/12 17:01:31  rschmidt * Added defines for WOL_CTL_DEFAULT * Editorial changes * * Revision 1.46  2002/10/14 14:47:57  rschmidt * Corrected bit mask for HW self test results * Added defines for WOL Registers * Editorial changes * * Revision 1.45  2002/10/11 09:25:22  mkarl * Added bit mask for HW self test results. * * Revision 1.44  2002/08/16 14:44:36  rschmidt * Added define GPC_HWCFG_GMII_FIB for YUKON Fiber * * Revision 1.43  2002/08/12 13:31:50  rschmidt * Corrected macros for GMAC Address Registers: GM_INADDR(), * GM_OUTADDR(), GM_INHASH, GM_OUTHASH. * Editorial changes * * Revision 1.42  2002/08/08 15:37:56  rschmidt * Added defines for Power Management Capabilities * Editorial changes * * Revision 1.41  2002/07/23 16:02:25  rschmidt * Added macro WOL_REG() to access WOL reg. (HW-Bug in YUKON 1st rev.) * * Revision 1.40  2002/07/15 15:41:37  rschmidt * Added new defines for Power Management Cap. & Control * Editorial changes * * Revision 1.39  2002/06/10 09:37:07  rschmidt * Added macros for the ADDR-Modul * * Revision 1.38  2002/06/05 08:15:19  rschmidt * Added defines for WOL Registers * Editorial changes * * Revision 1.37  2002/04/25 11:39:23  rschmidt * Added new defines for PCI Our Register 1 * Added new registers and defines for YUKON (Rx FIFO, Tx FIFO, * Time Stamp Timer, GMAC Control, GPHY Control,Link Control, * GMAC IRQ Source and Mask, Wake-up Frame Pattern Match); * Added new defines for Control/Status (VAUX available) * Added Chip ID for YUKON * Added define for descriptors with UDP ext. for YUKON * Added macros to access the GMAC * Added new Phy Type for Marvell 88E1011S (GPHY) * Editorial changes * * Revision 1.36  2000/11/09 12:32:49  rassmann * Renamed variables. * * Revision 1.35  2000/05/19 10:17:13  cgoos * Added inactivity check in PHY_READ (in DEBUG mode only). * * Revision 1.34  1999/11/22 13:53:40  cgoos * Changed license header to GPL. * * Revision 1.33  1999/08/27 11:17:10  malthoff * It's more savely to put brackets around macro parameters. * Brackets added for PHY_READ and PHY_WRITE. * * Revision 1.32  1999/05/19 07:31:01  cgoos * Changes for 1000Base-T. * Added HWAC_LINK_LED macro. * * Revision 1.31  1999/03/12 13:27:40  malthoff * Remove __STDC__. * * Revision 1.30  1999/02/09 09:28:20  malthoff * Add PCI_ERRBITS. * * Revision 1.29  1999/01/26 08:55:48  malthoff * Bugfix: The 16 bit field relations inside the descriptor are *	endianess dependend if the descriptor reversal feature *	(PCI_REV_DESC bit in PCI_OUR_REG_2) is enabled. *	Drivers which use this feature has to set the define *	SK_USE_REV_DESC. * * Revision 1.28  1998/12/10 11:10:22  malthoff * bug fix: IS_IRQ_STAT and IS_IRQ_MST_ERR has been twisted. * * Revision 1.27  1998/11/13 14:19:21  malthoff * Bug Fix: The bit definition of B3_PA_CTRL has completely * changed from HW Spec v1.3 to v1.5. * * Revision 1.26  1998/11/04 08:31:48  cgoos * Fixed byte ordering in XM_OUTADDR/XM_OUTHASH macros. * * Revision 1.25  1998/11/04 07:16:25  cgoos * Changed byte ordering in XM_INADDR/XM_INHASH again. * * Revision 1.24  1998/11/02 11:08:43  malthoff * RxCtrl and TxCtrl must be volatile. * * Revision 1.23  1998/10/28 13:50:45  malthoff * Fix: Endian support missing in XM_IN/OUT-ADDR/HASH macros. * * Revision 1.22  1998/10/26 08:01:36  malthoff * RX_MFF_CTRL1 is split up into RX_MFF_CTRL1, * RX_MFF_STAT_TO, and RX_MFF_TIST_TO. * TX_MFF_CTRL1 is split up TX_MFF_CTRL1 and TX_MFF_WAF. * * Revision 1.21  1998/10/20 07:43:10  malthoff * Fix: XM_IN/OUT/ADDR/HASH macros: * The pointer must be casted. * * Revision 1.20  1998/10/19 15:53:59  malthoff * Remove ML proto definitions. * * Revision 1.19  1998/10/16 14:40:17  gklug * fix: typo B0_XM_IMSK regs * * Revision 1.18  1998/10/16 09:46:54  malthoff * Remove temp defines for ML diag prototype. * Fix register definition for B0_XM1_PHY_DATA, B0_XM1_PHY_DATA * B0_XM2_PHY_DATA, B0_XM2_PHY_ADDR, B0_XA1_CSR, B0_XS1_CSR, * B0_XS2_CSR, and B0_XA2_CSR. * * Revision 1.17  1998/10/14 06:03:14  cgoos * Changed shifted constant to ULONG. * * Revision 1.16  1998/10/09 07:05:41  malthoff * Rename ALL_PA_ENA_TO to PA_ENA_TO_ALL. * * Revision 1.15  1998/10/05 07:54:23  malthoff * Split up RB_CTRL and it's bit definition into * RB_CTRL, RB_TST1, and RB_TST2. * Rename RB_RX_HTPP to RB_RX_LTPP. * Add ALL_PA_ENA_TO. Modify F_WATER_MARK * according to HW Spec. v1.5. * Add MFF_TX_CTRL_DEF. * * Revision 1.14  1998/09/28 13:31:16  malthoff * bug fix: B2_MAC_3 is 0x110 not 0x114 * * Revision 1.13  1998/09/24 14:42:56  malthoff * Split the RX_MFF_TST into RX_MFF_CTRL2, * RX_MFF_TST1, and RX_MFF_TST2. * Rename RX_MFF_CTRL to RX_MFF_CTRL1. * Add BMU bit CSR_SV_IDLE. * Add macros PHY_READ() and PHY_WRITE(). * Rename macro SK_ADDR() to SK_HW_ADDR() * because of conflicts with the Address Module. * * Revision 1.12  1998/09/16 07:25:33  malthoff * Change the parameter order in the XM_INxx and XM_OUTxx macros, * to have the IoC as first parameter. * * Revision 1.11  1998/09/03 09:58:41  malthoff * Rework the XM_xxx macros. Use {} instead of () to * be compatible with SK_xxx macros which are defined * with {}. * * Revision 1.10  1998/09/02 11:16:39  malthoff * Temporary modify B2_I2C_SW to make tests with * the GE/ML prototype. * * Revision 1.9  1998/08/19 09:11:49  gklug * fix: struct are removed from c-source (see CCC) * add: typedefs for all structs * * Revision 1.8  1998/08/18 08:27:27  malthoff * Add some temporary workarounds to test GE * sources with the ML. * * Revision 1.7  1998/07/03 14:42:26  malthoff * bug fix: Correct macro XMA(). * Add temporary workaround to access the PCI config space over I/O * * Revision 1.6  1998/06/23 11:30:36  malthoff * Remove ';' with ',' in macors. * * Revision 1.5  1998/06/22 14:20:57  malthoff * Add macro SK_ADDR(Base,Addr). * * Revision 1.4  1998/06/19 13:35:43  malthoff * change 'pGec' with 'pAC' * * Revision 1.3  1998/06/17 14:58:16  cvs * Lost keywords reinserted. * * Revision 1.1  1998/06/17 14:16:36  cvs * created * * ******************************************************************************/#ifndef __INC_SKGEHW_H#define __INC_SKGEHW_H#ifdef __cplusplusextern "C" {#endif	/* __cplusplus *//* defines ********************************************************************/#define BIT_31		(1UL << 31)#define BIT_30		(1L << 30)#define BIT_29		(1L << 29)#define BIT_28		(1L << 28)#define BIT_27		(1L << 27)#define BIT_26		(1L << 26)#define BIT_25		(1L << 25)#define BIT_24		(1L << 24)#define BIT_23		(1L << 23)#define BIT_22		(1L << 22)#define BIT_21		(1L << 21)#define BIT_20		(1L << 20)#define BIT_19		(1L << 19)#define BIT_18		(1L << 18)#define BIT_17		(1L << 17)#define BIT_16		(1L << 16)#define BIT_15		(1L << 15)#define BIT_14		(1L << 14)#define BIT_13		(1L << 13)#define BIT_12		(1L << 12)#define BIT_11		(1L << 11)#define BIT_10		(1L << 10)#define BIT_9		(1L << 9)#define BIT_8		(1L << 8)#define BIT_7		(1L << 7)#define BIT_6		(1L << 6)#define BIT_5		(1L << 5)#define BIT_4		(1L << 4)#define BIT_3		(1L << 3)#define BIT_2		(1L << 2)#define BIT_1		(1L << 1)#define BIT_0		1L#define BIT_15S		(1U << 15)#define BIT_14S		(1 << 14)#define BIT_13S		(1 << 13)#define BIT_12S		(1 << 12)#define BIT_11S		(1 << 11)#define BIT_10S		(1 << 10)#define BIT_9S		(1 << 9)#define BIT_8S		(1 << 8)#define BIT_7S		(1 << 7)#define BIT_6S		(1 << 6)#define BIT_5S		(1 << 5)#define BIT_4S		(1 << 4)#define BIT_3S		(1 << 3)#define BIT_2S		(1 << 2)#define BIT_1S		(1 << 1)#define BIT_0S		1#define SHIFT31(x)	((x) << 31)#define SHIFT30(x)	((x) << 30)#define SHIFT29(x)	((x) << 29)#define SHIFT28(x)	((x) << 28)#define SHIFT27(x)	((x) << 27)#define SHIFT26(x)	((x) << 26)#define SHIFT25(x)	((x) << 25)#define SHIFT24(x)	((x) << 24)#define SHIFT23(x)	((x) << 23)#define SHIFT22(x)	((x) << 22)#define SHIFT21(x)	((x) << 21)#define SHIFT20(x)	((x) << 20)#define SHIFT19(x)	((x) << 19)#define SHIFT18(x)	((x) << 18)#define SHIFT17(x)	((x) << 17)#define SHIFT16(x)	((x) << 16)#define SHIFT15(x)	((x) << 15)#define SHIFT14(x)	((x) << 14)#define SHIFT13(x)	((x) << 13)#define SHIFT12(x)	((x) << 12)#define SHIFT11(x)	((x) << 11)#define SHIFT10(x)	((x) << 10)#define SHIFT9(x)	((x) << 9)#define SHIFT8(x)	((x) << 8)#define SHIFT7(x)	((x) << 7)#define SHIFT6(x)	((x) << 6)