#define pUSB_OTG_VBUS_MASK             ((uint16_t volatile *)USB_OTG_VBUS_MASK) /* VBUS Control Interrupt Enable */#define bfin_read_USB_OTG_VBUS_MASK()  bfin_read16(USB_OTG_VBUS_MASK)#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val)#define pUSB_LINKINFO                  ((uint16_t volatile *)USB_LINKINFO) /* Enables programming of some PHY-side delays */#define bfin_read_USB_LINKINFO()       bfin_read16(USB_LINKINFO)#define bfin_write_USB_LINKINFO(val)   bfin_write16(USB_LINKINFO, val)#define pUSB_VPLEN                     ((uint16_t volatile *)USB_VPLEN) /* Determines duration of VBUS pulse for VBUS charging */#define bfin_read_USB_VPLEN()          bfin_read16(USB_VPLEN)#define bfin_write_USB_VPLEN(val)      bfin_write16(USB_VPLEN, val)#define pUSB_HS_EOF1                   ((uint16_t volatile *)USB_HS_EOF1) /* Time buffer for High-Speed transactions */#define bfin_read_USB_HS_EOF1()        bfin_read16(USB_HS_EOF1)#define bfin_write_USB_HS_EOF1(val)    bfin_write16(USB_HS_EOF1, val)#define pUSB_FS_EOF1                   ((uint16_t volatile *)USB_FS_EOF1) /* Time buffer for Full-Speed transactions */#define bfin_read_USB_FS_EOF1()        bfin_read16(USB_FS_EOF1)#define bfin_write_USB_FS_EOF1(val)    bfin_write16(USB_FS_EOF1, val)#define pUSB_LS_EOF1                   ((uint16_t volatile *)USB_LS_EOF1) /* Time buffer for Low-Speed transactions */#define bfin_read_USB_LS_EOF1()        bfin_read16(USB_LS_EOF1)#define bfin_write_USB_LS_EOF1(val)    bfin_write16(USB_LS_EOF1, val)#define pUSB_APHY_CNTRL                ((uint16_t volatile *)USB_APHY_CNTRL) /* Register that increases visibility of Analog PHY */#define bfin_read_USB_APHY_CNTRL()     bfin_read16(USB_APHY_CNTRL)#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val)#define pUSB_APHY_CALIB                ((uint16_t volatile *)USB_APHY_CALIB) /* Register used to set some calibration values */#define bfin_read_USB_APHY_CALIB()     bfin_read16(USB_APHY_CALIB)#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val)#define pUSB_APHY_CNTRL2               ((uint16_t volatile *)USB_APHY_CNTRL2) /* Register used to prevent re-enumeration once Moab goes into hibernate mode */#define bfin_read_USB_APHY_CNTRL2()    bfin_read16(USB_APHY_CNTRL2)#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val)#define pUSB_PHY_TEST                  ((uint16_t volatile *)USB_PHY_TEST) /* Used for reducing simulation time and simplifies FIFO testability */#define bfin_read_USB_PHY_TEST()       bfin_read16(USB_PHY_TEST)#define bfin_write_USB_PHY_TEST(val)   bfin_write16(USB_PHY_TEST, val)#define pUSB_PLLOSC_CTRL               ((uint16_t volatile *)USB_PLLOSC_CTRL) /* Used to program different parameters for USB PLL and Oscillator */#define bfin_read_USB_PLLOSC_CTRL()    bfin_read16(USB_PLLOSC_CTRL)#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val)#define pUSB_SRP_CLKDIV                ((uint16_t volatile *)USB_SRP_CLKDIV) /* Used to program clock divide value for the clock fed to the SRP detection logic */#define bfin_read_USB_SRP_CLKDIV()     bfin_read16(USB_SRP_CLKDIV)#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val)#define pUSB_EP_NI0_TXMAXP             ((uint16_t volatile *)USB_EP_NI0_TXMAXP) /* Maximum packet size for Host Tx endpoint0 */#define bfin_read_USB_EP_NI0_TXMAXP()  bfin_read16(USB_EP_NI0_TXMAXP)#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val)#define pUSB_EP_NI0_TXCSR              ((uint16_t volatile *)USB_EP_NI0_TXCSR) /* Control Status register for endpoint 0 */#define bfin_read_USB_EP_NI0_TXCSR()   bfin_read16(USB_EP_NI0_TXCSR)#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val)#define pUSB_EP_NI0_RXMAXP             ((uint16_t volatile *)USB_EP_NI0_RXMAXP) /* Maximum packet size for Host Rx endpoint0 */#define bfin_read_USB_EP_NI0_RXMAXP()  bfin_read16(USB_EP_NI0_RXMAXP)#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val)#define pUSB_EP_NI0_RXCSR              ((uint16_t volatile *)USB_EP_NI0_RXCSR) /* Control Status register for Host Rx endpoint0 */#define bfin_read_USB_EP_NI0_RXCSR()   bfin_read16(USB_EP_NI0_RXCSR)#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val)#define pUSB_EP_NI0_RXCOUNT            ((uint16_t volatile *)USB_EP_NI0_RXCOUNT) /* Number of bytes received in endpoint 0 FIFO */#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT)#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val)#define pUSB_EP_NI0_TXTYPE             ((uint16_t volatile *)USB_EP_NI0_TXTYPE) /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */#define bfin_read_USB_EP_NI0_TXTYPE()  bfin_read16(USB_EP_NI0_TXTYPE)#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val)#define pUSB_EP_NI0_TXINTERVAL         ((uint16_t volatile *)USB_EP_NI0_TXINTERVAL) /* Sets the NAK response timeout on Endpoint 0 */#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL)#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val)#define pUSB_EP_NI0_RXTYPE             ((uint16_t volatile *)USB_EP_NI0_RXTYPE) /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */#define bfin_read_USB_EP_NI0_RXTYPE()  bfin_read16(USB_EP_NI0_RXTYPE)#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val)#define pUSB_EP_NI0_RXINTERVAL         ((uint16_t volatile *)USB_EP_NI0_RXINTERVAL) /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL)#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val)#define pUSB_EP_NI0_TXCOUNT            ((uint16_t volatile *)USB_EP_NI0_TXCOUNT) /* Number of bytes to be written to the endpoint0 Tx FIFO */#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT)#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val)#define pUSB_EP_NI1_TXMAXP             ((uint16_t volatile *)USB_EP_NI1_TXMAXP) /* Maximum packet size for Host Tx endpoint1 */#define bfin_read_USB_EP_NI1_TXMAXP()  bfin_read16(USB_EP_NI1_TXMAXP)#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val)#define pUSB_EP_NI1_TXCSR              ((uint16_t volatile *)USB_EP_NI1_TXCSR) /* Control Status register for endpoint1 */#define bfin_read_USB_EP_NI1_TXCSR()   bfin_read16(USB_EP_NI1_TXCSR)#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val)#define pUSB_EP_NI1_RXMAXP             ((uint16_t volatile *)USB_EP_NI1_RXMAXP) /* Maximum packet size for Host Rx endpoint1 */#define bfin_read_USB_EP_NI1_RXMAXP()  bfin_read16(USB_EP_NI1_RXMAXP)#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val)#define pUSB_EP_NI1_RXCSR              ((uint16_t volatile *)USB_EP_NI1_RXCSR) /* Control Status register for Host Rx endpoint1 */#define bfin_read_USB_EP_NI1_RXCSR()   bfin_read16(USB_EP_NI1_RXCSR)#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val)#define pUSB_EP_NI1_RXCOUNT            ((uint16_t volatile *)USB_EP_NI1_RXCOUNT) /* Number of bytes received in endpoint1 FIFO */#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT)#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val)#define pUSB_EP_NI1_TXTYPE             ((uint16_t volatile *)USB_EP_NI1_TXTYPE) /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */#define bfin_read_USB_EP_NI1_TXTYPE()  bfin_read16(USB_EP_NI1_TXTYPE)#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val)#define pUSB_EP_NI1_TXINTERVAL         ((uint16_t volatile *)USB_EP_NI1_TXINTERVAL) /* Sets the NAK response timeout on Endpoint1 */#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL)#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val)#define pUSB_EP_NI1_RXTYPE             ((uint16_t volatile *)USB_EP_NI1_RXTYPE) /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */#define bfin_read_USB_EP_NI1_RXTYPE()  bfin_read16(USB_EP_NI1_RXTYPE)#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val)#define pUSB_EP_NI1_RXINTERVAL         ((uint16_t volatile *)USB_EP_NI1_RXINTERVAL) /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL)#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val)#define pUSB_EP_NI1_TXCOUNT            ((uint16_t volatile *)USB_EP_NI1_TXCOUNT) /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT)#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val)#define pUSB_EP_NI2_TXMAXP             ((uint16_t volatile *)USB_EP_NI2_TXMAXP) /* Maximum packet size for Host Tx endpoint2 */#define bfin_read_USB_EP_NI2_TXMAXP()  bfin_read16(USB_EP_NI2_TXMAXP)#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val)#define pUSB_EP_NI2_TXCSR              ((uint16_t volatile *)USB_EP_NI2_TXCSR) /* Control Status register for endpoint2 */#define bfin_read_USB_EP_NI2_TXCSR()   bfin_read16(USB_EP_NI2_TXCSR)#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val)#define pUSB_EP_NI2_RXMAXP             ((uint16_t volatile *)USB_EP_NI2_RXMAXP) /* Maximum packet size for Host Rx endpoint2 */#define bfin_read_USB_EP_NI2_RXMAXP()  bfin_read16(USB_EP_NI2_RXMAXP)#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val)#define pUSB_EP_NI2_RXCSR              ((uint16_t volatile *)USB_EP_NI2_RXCSR) /* Control Status register for Host Rx endpoint2 */#define bfin_read_USB_EP_NI2_RXCSR()   bfin_read16(USB_EP_NI2_RXCSR)#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val)#define pUSB_EP_NI2_RXCOUNT            ((uint16_t volatile *)USB_EP_NI2_RXCOUNT) /* Number of bytes received in endpoint2 FIFO */#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT)#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val)#define pUSB_EP_NI2_TXTYPE             ((uint16_t volatile *)USB_EP_NI2_TXTYPE) /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */#define bfin_read_USB_EP_NI2_TXTYPE()  bfin_read16(USB_EP_NI2_TXTYPE)#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val)#define pUSB_EP_NI2_TXINTERVAL         ((uint16_t volatile *)USB_EP_NI2_TXINTERVAL) /* Sets the NAK response timeout on Endpoint2 */#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL)#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val)#define pUSB_EP_NI2_RXTYPE             ((uint16_t volatile *)USB_EP_NI2_RXTYPE) /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */#define bfin_read_USB_EP_NI2_RXTYPE()  bfin_read16(USB_EP_NI2_RXTYPE)#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val)#define pUSB_EP_NI2_RXINTERVAL         ((uint16_t volatile *)USB_EP_NI2_RXINTERVAL) /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL)#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val)#define pUSB_EP_NI2_TXCOUNT            ((uint16_t volatile *)USB_EP_NI2_TXCOUNT) /* Number of bytes to be written to the endpoint2 Tx FIFO */#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT)#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val)#define pUSB_EP_NI3_TXMAXP             ((uint16_t volatile *)USB_EP_NI3_TXMAXP) /* Maximum packet size for Host Tx endpoint3 */#define bfin_read_USB_EP_NI3_TXMAXP()  bfin_read16(USB_EP_NI3_TXMAXP)#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val)#define pUSB_EP_NI3_TXCSR              ((uint16_t volatile *)USB_EP_NI3_TXCSR) /* Control Status register for endpoint3 */#define bfin_read_USB_EP_NI3_TXCSR()   bfin_read16(USB_EP_NI3_TXCSR)#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val)#define pUSB_EP_NI3_RXMAXP             ((uint16_t volatile *)USB_EP_NI3_RXMAXP) /* Maximum packet size for Host Rx endpoint3 */#define bfin_read_USB_EP_NI3_RXMAXP()  bfin_read16(USB_EP_NI3_RXMAXP)#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val)#define pUSB_EP_NI3_RXCSR              ((uint16_t volatile *)USB_EP_NI3_RXCSR) /* Control Status register for Host Rx endpoint3 */#define bfin_read_USB_EP_NI3_RXCSR()   bfin_read16(USB_EP_NI3_RXCSR)#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val)#define pUSB_EP_NI3_RXCOUNT            ((uint16_t volatile *)USB_EP_NI3_RXCOUNT) /* Number of bytes received in endpoint3 FIFO */#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT)#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val)#define pUSB_EP_NI3_TXTYPE             ((uint16_t volatile *)USB_EP_NI3_TXTYPE) /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */#define bfin_read_USB_EP_NI3_TXTYPE()  bfin_read16(USB_EP_NI3_TXTYPE)#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val)#define pUSB_EP_NI3_TXINTERVAL         ((uint16_t volatile *)USB_EP_NI3_TXINTERVAL) /* Sets the NAK response timeout on Endpoint3 */#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL)#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val)#define pUSB_EP_NI3_RXTYPE             ((uint16_t volatile *)USB_EP_NI3_RXTYPE) /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */#define bfin_read_USB_EP_NI3_RXTYPE()  bfin_read16(USB_EP_NI3_RXTYPE)