#define pUSB_RX_MAX_PACKET             ((uint16_t volatile *)USB_RX_MAX_PACKET) /* Maximum packet size for Host Rx endpoint */#define bfin_read_USB_RX_MAX_PACKET()  bfin_read16(USB_RX_MAX_PACKET)#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val)#define pUSB_RXCSR                     ((uint16_t volatile *)USB_RXCSR) /* Control Status register for Host Rx endpoint */#define bfin_read_USB_RXCSR()          bfin_read16(USB_RXCSR)#define bfin_write_USB_RXCSR(val)      bfin_write16(USB_RXCSR, val)#define pUSB_COUNT0                    ((uint16_t volatile *)USB_COUNT0) /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */#define bfin_read_USB_COUNT0()         bfin_read16(USB_COUNT0)#define bfin_write_USB_COUNT0(val)     bfin_write16(USB_COUNT0, val)#define pUSB_RXCOUNT                   ((uint16_t volatile *)USB_RXCOUNT) /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */#define bfin_read_USB_RXCOUNT()        bfin_read16(USB_RXCOUNT)#define bfin_write_USB_RXCOUNT(val)    bfin_write16(USB_RXCOUNT, val)#define pUSB_TXTYPE                    ((uint16_t volatile *)USB_TXTYPE) /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */#define bfin_read_USB_TXTYPE()         bfin_read16(USB_TXTYPE)#define bfin_write_USB_TXTYPE(val)     bfin_write16(USB_TXTYPE, val)#define pUSB_NAKLIMIT0                 ((uint16_t volatile *)USB_NAKLIMIT0) /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */#define bfin_read_USB_NAKLIMIT0()      bfin_read16(USB_NAKLIMIT0)#define bfin_write_USB_NAKLIMIT0(val)  bfin_write16(USB_NAKLIMIT0, val)#define pUSB_TXINTERVAL                ((uint16_t volatile *)USB_TXINTERVAL) /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */#define bfin_read_USB_TXINTERVAL()     bfin_read16(USB_TXINTERVAL)#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val)#define pUSB_RXTYPE                    ((uint16_t volatile *)USB_RXTYPE) /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */#define bfin_read_USB_RXTYPE()         bfin_read16(USB_RXTYPE)#define bfin_write_USB_RXTYPE(val)     bfin_write16(USB_RXTYPE, val)#define pUSB_RXINTERVAL                ((uint16_t volatile *)USB_RXINTERVAL) /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */#define bfin_read_USB_RXINTERVAL()     bfin_read16(USB_RXINTERVAL)#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val)#define pUSB_TXCOUNT                   ((uint16_t volatile *)USB_TXCOUNT) /* Number of bytes to be written to the selected endpoint Tx FIFO */#define bfin_read_USB_TXCOUNT()        bfin_read16(USB_TXCOUNT)#define bfin_write_USB_TXCOUNT(val)    bfin_write16(USB_TXCOUNT, val)#define pUSB_EP0_FIFO                  ((uint16_t volatile *)USB_EP0_FIFO) /* Endpoint 0 FIFO */#define bfin_read_USB_EP0_FIFO()       bfin_read16(USB_EP0_FIFO)#define bfin_write_USB_EP0_FIFO(val)   bfin_write16(USB_EP0_FIFO, val)#define pUSB_EP1_FIFO                  ((uint16_t volatile *)USB_EP1_FIFO) /* Endpoint 1 FIFO */#define bfin_read_USB_EP1_FIFO()       bfin_read16(USB_EP1_FIFO)#define bfin_write_USB_EP1_FIFO(val)   bfin_write16(USB_EP1_FIFO, val)#define pUSB_EP2_FIFO                  ((uint16_t volatile *)USB_EP2_FIFO) /* Endpoint 2 FIFO */#define bfin_read_USB_EP2_FIFO()       bfin_read16(USB_EP2_FIFO)#define bfin_write_USB_EP2_FIFO(val)   bfin_write16(USB_EP2_FIFO, val)#define pUSB_EP3_FIFO                  ((uint16_t volatile *)USB_EP3_FIFO) /* Endpoint 3 FIFO */#define bfin_read_USB_EP3_FIFO()       bfin_read16(USB_EP3_FIFO)#define bfin_write_USB_EP3_FIFO(val)   bfin_write16(USB_EP3_FIFO, val)#define pUSB_EP4_FIFO                  ((uint16_t volatile *)USB_EP4_FIFO) /* Endpoint 4 FIFO */#define bfin_read_USB_EP4_FIFO()       bfin_read16(USB_EP4_FIFO)#define bfin_write_USB_EP4_FIFO(val)   bfin_write16(USB_EP4_FIFO, val)#define pUSB_EP5_FIFO                  ((uint16_t volatile *)USB_EP5_FIFO) /* Endpoint 5 FIFO */#define bfin_read_USB_EP5_FIFO()       bfin_read16(USB_EP5_FIFO)#define bfin_write_USB_EP5_FIFO(val)   bfin_write16(USB_EP5_FIFO, val)#define pUSB_EP6_FIFO                  ((uint16_t volatile *)USB_EP6_FIFO) /* Endpoint 6 FIFO */#define bfin_read_USB_EP6_FIFO()       bfin_read16(USB_EP6_FIFO)#define bfin_write_USB_EP6_FIFO(val)   bfin_write16(USB_EP6_FIFO, val)#define pUSB_EP7_FIFO                  ((uint16_t volatile *)USB_EP7_FIFO) /* Endpoint 7 FIFO */#define bfin_read_USB_EP7_FIFO()       bfin_read16(USB_EP7_FIFO)#define bfin_write_USB_EP7_FIFO(val)   bfin_write16(USB_EP7_FIFO, val)#define pUSB_OTG_DEV_CTL               ((uint16_t volatile *)USB_OTG_DEV_CTL) /* OTG Device Control Register */#define bfin_read_USB_OTG_DEV_CTL()    bfin_read16(USB_OTG_DEV_CTL)#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val)#define pUSB_OTG_VBUS_IRQ              ((uint16_t volatile *)USB_OTG_VBUS_IRQ) /* OTG VBUS Control Interrupts */#define bfin_read_USB_OTG_VBUS_IRQ()   bfin_read16(USB_OTG_VBUS_IRQ)#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val)#define pUSB_OTG_VBUS_MASK             ((uint16_t volatile *)USB_OTG_VBUS_MASK) /* VBUS Control Interrupt Enable */#define bfin_read_USB_OTG_VBUS_MASK()  bfin_read16(USB_OTG_VBUS_MASK)#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val)#define pUSB_LINKINFO                  ((uint16_t volatile *)USB_LINKINFO) /* Enables programming of some PHY-side delays */#define bfin_read_USB_LINKINFO()       bfin_read16(USB_LINKINFO)#define bfin_write_USB_LINKINFO(val)   bfin_write16(USB_LINKINFO, val)#define pUSB_VPLEN                     ((uint16_t volatile *)USB_VPLEN) /* Determines duration of VBUS pulse for VBUS charging */#define bfin_read_USB_VPLEN()          bfin_read16(USB_VPLEN)#define bfin_write_USB_VPLEN(val)      bfin_write16(USB_VPLEN, val)#define pUSB_HS_EOF1                   ((uint16_t volatile *)USB_HS_EOF1) /* Time buffer for High-Speed transactions */#define bfin_read_USB_HS_EOF1()        bfin_read16(USB_HS_EOF1)#define bfin_write_USB_HS_EOF1(val)    bfin_write16(USB_HS_EOF1, val)#define pUSB_FS_EOF1                   ((uint16_t volatile *)USB_FS_EOF1) /* Time buffer for Full-Speed transactions */#define bfin_read_USB_FS_EOF1()        bfin_read16(USB_FS_EOF1)#define bfin_write_USB_FS_EOF1(val)    bfin_write16(USB_FS_EOF1, val)#define pUSB_LS_EOF1                   ((uint16_t volatile *)USB_LS_EOF1) /* Time buffer for Low-Speed transactions */#define bfin_read_USB_LS_EOF1()        bfin_read16(USB_LS_EOF1)#define bfin_write_USB_LS_EOF1(val)    bfin_write16(USB_LS_EOF1, val)#define pUSB_APHY_CNTRL                ((uint16_t volatile *)USB_APHY_CNTRL) /* Register that increases visibility of Analog PHY */#define bfin_read_USB_APHY_CNTRL()     bfin_read16(USB_APHY_CNTRL)#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val)#define pUSB_APHY_CALIB                ((uint16_t volatile *)USB_APHY_CALIB) /* Register used to set some calibration values */#define bfin_read_USB_APHY_CALIB()     bfin_read16(USB_APHY_CALIB)#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val)#define pUSB_APHY_CNTRL2               ((uint16_t volatile *)USB_APHY_CNTRL2) /* Register used to prevent re-enumeration once Moab goes into hibernate mode */#define bfin_read_USB_APHY_CNTRL2()    bfin_read16(USB_APHY_CNTRL2)#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val)#define pUSB_PHY_TEST                  ((uint16_t volatile *)USB_PHY_TEST) /* Used for reducing simulation time and simplifies FIFO testability */#define bfin_read_USB_PHY_TEST()       bfin_read16(USB_PHY_TEST)#define bfin_write_USB_PHY_TEST(val)   bfin_write16(USB_PHY_TEST, val)#define pUSB_PLLOSC_CTRL               ((uint16_t volatile *)USB_PLLOSC_CTRL) /* Used to program different parameters for USB PLL and Oscillator */#define bfin_read_USB_PLLOSC_CTRL()    bfin_read16(USB_PLLOSC_CTRL)#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val)#define pUSB_SRP_CLKDIV                ((uint16_t volatile *)USB_SRP_CLKDIV) /* Used to program clock divide value for the clock fed to the SRP detection logic */#define bfin_read_USB_SRP_CLKDIV()     bfin_read16(USB_SRP_CLKDIV)#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val)#define pUSB_EP_NI0_TXMAXP             ((uint16_t volatile *)USB_EP_NI0_TXMAXP) /* Maximum packet size for Host Tx endpoint0 */#define bfin_read_USB_EP_NI0_TXMAXP()  bfin_read16(USB_EP_NI0_TXMAXP)#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val)#define pUSB_EP_NI0_TXCSR              ((uint16_t volatile *)USB_EP_NI0_TXCSR) /* Control Status register for endpoint 0 */#define bfin_read_USB_EP_NI0_TXCSR()   bfin_read16(USB_EP_NI0_TXCSR)#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val)#define pUSB_EP_NI0_RXMAXP             ((uint16_t volatile *)USB_EP_NI0_RXMAXP) /* Maximum packet size for Host Rx endpoint0 */#define bfin_read_USB_EP_NI0_RXMAXP()  bfin_read16(USB_EP_NI0_RXMAXP)#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val)#define pUSB_EP_NI0_RXCSR              ((uint16_t volatile *)USB_EP_NI0_RXCSR) /* Control Status register for Host Rx endpoint0 */#define bfin_read_USB_EP_NI0_RXCSR()   bfin_read16(USB_EP_NI0_RXCSR)#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val)#define pUSB_EP_NI0_RXCOUNT            ((uint16_t volatile *)USB_EP_NI0_RXCOUNT) /* Number of bytes received in endpoint 0 FIFO */#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT)#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val)#define pUSB_EP_NI0_TXTYPE             ((uint16_t volatile *)USB_EP_NI0_TXTYPE) /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */#define bfin_read_USB_EP_NI0_TXTYPE()  bfin_read16(USB_EP_NI0_TXTYPE)#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val)#define pUSB_EP_NI0_TXINTERVAL         ((uint16_t volatile *)USB_EP_NI0_TXINTERVAL) /* Sets the NAK response timeout on Endpoint 0 */#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL)#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val)#define pUSB_EP_NI0_RXTYPE             ((uint16_t volatile *)USB_EP_NI0_RXTYPE) /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */#define bfin_read_USB_EP_NI0_RXTYPE()  bfin_read16(USB_EP_NI0_RXTYPE)#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val)#define pUSB_EP_NI0_RXINTERVAL         ((uint16_t volatile *)USB_EP_NI0_RXINTERVAL) /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL)#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val)#define pUSB_EP_NI0_TXCOUNT            ((uint16_t volatile *)USB_EP_NI0_TXCOUNT) /* Number of bytes to be written to the endpoint0 Tx FIFO */#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT)#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val)#define pUSB_EP_NI1_TXMAXP             ((uint16_t volatile *)USB_EP_NI1_TXMAXP) /* Maximum packet size for Host Tx endpoint1 */#define bfin_read_USB_EP_NI1_TXMAXP()  bfin_read16(USB_EP_NI1_TXMAXP)#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val)#define pUSB_EP_NI1_TXCSR              ((uint16_t volatile *)USB_EP_NI1_TXCSR) /* Control Status register for endpoint1 */#define bfin_read_USB_EP_NI1_TXCSR()   bfin_read16(USB_EP_NI1_TXCSR)#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val)#define pUSB_EP_NI1_RXMAXP             ((uint16_t volatile *)USB_EP_NI1_RXMAXP) /* Maximum packet size for Host Rx endpoint1 */#define bfin_read_USB_EP_NI1_RXMAXP()  bfin_read16(USB_EP_NI1_RXMAXP)#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val)#define pUSB_EP_NI1_RXCSR              ((uint16_t volatile *)USB_EP_NI1_RXCSR) /* Control Status register for Host Rx endpoint1 */#define bfin_read_USB_EP_NI1_RXCSR()   bfin_read16(USB_EP_NI1_RXCSR)#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val)#define pUSB_EP_NI1_RXCOUNT            ((uint16_t volatile *)USB_EP_NI1_RXCOUNT) /* Number of bytes received in endpoint1 FIFO */#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT)#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val)#define pUSB_EP_NI1_TXTYPE             ((uint16_t volatile *)USB_EP_NI1_TXTYPE) /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */#define bfin_read_USB_EP_NI1_TXTYPE()  bfin_read16(USB_EP_NI1_TXTYPE)#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val)#define pUSB_EP_NI1_TXINTERVAL         ((uint16_t volatile *)USB_EP_NI1_TXINTERVAL) /* Sets the NAK response timeout on Endpoint1 */#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL)#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val)#define pUSB_EP_NI1_RXTYPE             ((uint16_t volatile *)USB_EP_NI1_RXTYPE) /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */#define bfin_read_USB_EP_NI1_RXTYPE()  bfin_read16(USB_EP_NI1_RXTYPE)#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val)#define pUSB_EP_NI1_RXINTERVAL         ((uint16_t volatile *)USB_EP_NI1_RXINTERVAL) /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL)#define bfin_write_USB_EP_N