/*********************************************
File name			: demo_8_6.c
Chip type           : ATmega16
Program type        : Application
Clock frequency     : 4.000000 MHz
Memory model        : Small
External SRAM size  : 0
Data Stack size     : 256
*********************************************/

#include <mega16.h>
	#ifndef __SLEEP_DEFINED__
	#define __SLEEP_DEFINED__
	.EQU __se_bit=0x40
	.EQU __sm_mask=0xB0
	.EQU __sm_powerdown=0x20
	.EQU __sm_powersave=0x30
	.EQU __sm_standby=0xA0
	.EQU __sm_ext_standby=0xB0
	.EQU __sm_adc_noise_red=0x10
	.SET power_ctrl_reg=mcucr
	#endif

flash unsigned char auc_SinParam[128] = {
128,134,140,147,153,159,165,171,177,182,188,193,198,204,208,213,
218,222,226,230,233,237,240,242,245,247,249,251,252,253,254,254,
254,254,253,252,251,250,248,246,244,241,238,235,232,228,224,220,
215,211,206,201,196,191,185,179,174,168,162,156,150,144,137,131,
125,119,112,106,100,94,88,82,77,71,65,60,55,50,45,41,
36,32,28,24,21,18,15,12,10,8,6,5,4,3,2,2,
2,2,3,4,5,7,9,11,14,16,19,23,26,30,34,38,
43,48,52,57,63,68,74,79,85,91,97,103,109,116,122,128}; 	// 128點正弦波樣本值

unsigned char x_SW = 8,X_LUT = 0;

// T/C0 溢出中斷服務
interrupt [TIM0_OVF] void timer0_ovf_isr(void)
{
    X_LUT += x_SW;  				// 新樣點指針
	if (X_LUT > 127) X_LUT -= 128;	// 樣點指針調整
	OCR0 = auc_SinParam[X_LUT];		// 取樣點指針到比較匹配寄存器
	//OCR0+=1;
}

void main(void)
{
	DDRB=0x08;					// PB3輸出方式，作為OC0輸出PWM波
	// Timer/Counter 0 initialization
	// Clock source: System Clock
	// Clock value: 4000.000 kHz
	// Mode: Fast PWM top=FFh
	// OC0 output: Non-Inverted PWM
	TCCR0=0x69;
	OCR0=128;

	TIMSK=0x01;					// 允許T/C0溢出中斷
	#asm("sei")					// 開放全局中斷

	while (1)
    {};
}