?? fir3.fit
字號:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 03/29/2009 17:05:27
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "fir3"
BEGIN
DEVICE = "EPF10K30ETC144-1";
"clk" : INPUT_PIN = 55 ;
"x0" : INPUT_PIN = 54 ;
"x1" : INPUT_PIN = 56 ;
"x2" : INPUT_PIN = 124 ;
"x3" : INPUT_PIN = 126 ;
"x4" : INPUT_PIN = 125 ;
"x5" : INPUT_PIN = 100 ;
"x6" : INPUT_PIN = 90 ;
"x7" : INPUT_PIN = 144 ;
"x8" : INPUT_PIN = 102 ;
"x9" : INPUT_PIN = 42 ;
"x10" : INPUT_PIN = 130 ;
"x11" : INPUT_PIN = 72 ;
"y0" : OUTPUT_PIN = 41 ;
"y1" : OUTPUT_PIN = 140 ;
"y2" : OUTPUT_PIN = 142 ;
"y3" : OUTPUT_PIN = 21 ;
"y4" : OUTPUT_PIN = 49 ;
"y5" : OUTPUT_PIN = 7 ;
"y6" : OUTPUT_PIN = 44 ;
"y7" : OUTPUT_PIN = 8 ;
"y8" : OUTPUT_PIN = 51 ;
"y9" : OUTPUT_PIN = 101 ;
"y10" : OUTPUT_PIN = 32 ;
"y11" : OUTPUT_PIN = 143 ;
"|LPM_ADD_SUB:1026|addcore:adder|pcarry1" : LOCATION = LC8_A35;
"|LPM_ADD_SUB:1026|addcore:adder|pcarry2" : LOCATION = LC1_A35;
"|LPM_ADD_SUB:1026|addcore:adder|pcarry3" : LOCATION = LC7_A35;
"|LPM_ADD_SUB:1026|addcore:adder|pcarry4" : LOCATION = LC1_A22;
"|LPM_ADD_SUB:1026|addcore:adder|pcarry5" : LOCATION = LC7_A22;
"|LPM_ADD_SUB:1026|addcore:adder|pcarry6" : LOCATION = LC8_A22;
"|LPM_ADD_SUB:1026|addcore:adder|pcarry7" : LOCATION = LC3_A22;
"|LPM_ADD_SUB:1026|addcore:adder|pcarry9" : LOCATION = LC5_A34;
"|LPM_ADD_SUB:1026|addcore:adder|:151" : LOCATION = LC4_A35;
"|LPM_ADD_SUB:1026|addcore:adder|~152~1" : LOCATION = LC7_A28;
"|LPM_ADD_SUB:1026|addcore:adder|:153" : LOCATION = LC5_A35;
"|LPM_ADD_SUB:1026|addcore:adder|:154" : LOCATION = LC2_A22;
"|LPM_ADD_SUB:1026|addcore:adder|:155" : LOCATION = LC5_A22;
"|LPM_ADD_SUB:1026|addcore:adder|:156" : LOCATION = LC4_A22;
"|LPM_ADD_SUB:1026|addcore:adder|:157" : LOCATION = LC6_A22;
"|LPM_ADD_SUB:1026|addcore:adder|:158" : LOCATION = LC7_A34;
"|LPM_ADD_SUB:1026|addcore:adder|:159" : LOCATION = LC6_A34;
"|LPM_ADD_SUB:1088|addcore:adder|pcarry1" : LOCATION = LC5_A28;
"|LPM_ADD_SUB:1088|addcore:adder|pcarry2" : LOCATION = LC2_A28;
"|LPM_ADD_SUB:1088|addcore:adder|pcarry3" : LOCATION = LC6_A35;
"|LPM_ADD_SUB:1088|addcore:adder|pcarry4" : LOCATION = LC2_A23;
"|LPM_ADD_SUB:1088|addcore:adder|pcarry5" : LOCATION = LC1_A27;
"|LPM_ADD_SUB:1088|addcore:adder|pcarry6" : LOCATION = LC5_A27;
"|LPM_ADD_SUB:1088|addcore:adder|pcarry7" : LOCATION = LC4_A27;
"|LPM_ADD_SUB:1088|addcore:adder|pcarry8" : LOCATION = LC8_A25;
"|LPM_ADD_SUB:1088|addcore:adder|pcarry9" : LOCATION = LC3_A25;
"|LPM_ADD_SUB:1088|addcore:adder|:88" : LOCATION = LC4_A28;
"|LPM_ADD_SUB:1088|addcore:adder|~160~1" : LOCATION = LC8_A28;
"|LPM_ADD_SUB:1088|addcore:adder|:161" : LOCATION = LC1_A28;
"|LPM_ADD_SUB:1088|addcore:adder|~162~1" : LOCATION = LC2_A35;
"|LPM_ADD_SUB:1088|addcore:adder|:163" : LOCATION = LC5_A23;
"|LPM_ADD_SUB:1088|addcore:adder|:164" : LOCATION = LC8_A27;
"|LPM_ADD_SUB:1088|addcore:adder|:165" : LOCATION = LC2_A27;
"|LPM_ADD_SUB:1088|addcore:adder|~166~1" : LOCATION = LC3_A27;
"|LPM_ADD_SUB:1088|addcore:adder|:167" : LOCATION = LC6_A25;
"|LPM_ADD_SUB:1088|addcore:adder|:168" : LOCATION = LC4_A25;
"|LPM_ADD_SUB:1088|addcore:adder|:169" : LOCATION = LC3_A34;
"|LPM_ADD_SUB:1163|addcore:adder|pcarry1" : LOCATION = LC1_A33;
"|LPM_ADD_SUB:1163|addcore:adder|pcarry2" : LOCATION = LC6_A33;
"|LPM_ADD_SUB:1163|addcore:adder|pcarry3" : LOCATION = LC2_A33;
"|LPM_ADD_SUB:1163|addcore:adder|pcarry4" : LOCATION = LC2_A21;
"|LPM_ADD_SUB:1163|addcore:adder|pcarry5" : LOCATION = LC4_A29;
"|LPM_ADD_SUB:1163|addcore:adder|pcarry6" : LOCATION = LC2_A29;
"|LPM_ADD_SUB:1163|addcore:adder|pcarry7" : LOCATION = LC1_A25;
"|LPM_ADD_SUB:1163|addcore:adder|pcarry8" : LOCATION = LC2_A25;
"|LPM_ADD_SUB:1163|addcore:adder|pcarry9" : LOCATION = LC2_A36;
"|LPM_ADD_SUB:1163|addcore:adder|:92" : LOCATION = LC6_A28;
"|LPM_ADD_SUB:1163|addcore:adder|:153" : LOCATION = LC3_A28;
"|LPM_ADD_SUB:1163|addcore:adder|:169" : LOCATION = LC7_A31;
"|LPM_ADD_SUB:1163|addcore:adder|~170~1" : LOCATION = LC3_A33;
"|LPM_ADD_SUB:1163|addcore:adder|:171" : LOCATION = LC5_A33;
"|LPM_ADD_SUB:1163|addcore:adder|~172~1" : LOCATION = LC1_A21;
"|LPM_ADD_SUB:1163|addcore:adder|:173" : LOCATION = LC3_A29;
"|LPM_ADD_SUB:1163|addcore:adder|~174~1" : LOCATION = LC6_A29;
"|LPM_ADD_SUB:1163|addcore:adder|:175" : LOCATION = LC5_A25;
"|LPM_ADD_SUB:1163|addcore:adder|:176" : LOCATION = LC7_A25;
"|LPM_ADD_SUB:1163|addcore:adder|:177" : LOCATION = LC1_A36;
"|LPM_ADD_SUB:1163|addcore:adder|:178" : LOCATION = LC3_A36;
"|LPM_ADD_SUB:1239|addcore:adder|pcarry1" : LOCATION = LC2_A31;
"|LPM_ADD_SUB:1239|addcore:adder|pcarry2" : LOCATION = LC7_A33;
"|LPM_ADD_SUB:1239|addcore:adder|pcarry3" : LOCATION = LC3_A21;
"|LPM_ADD_SUB:1239|addcore:adder|pcarry4" : LOCATION = LC5_A21;
"|LPM_ADD_SUB:1239|addcore:adder|pcarry5" : LOCATION = LC8_A29;
"|LPM_ADD_SUB:1239|addcore:adder|pcarry6" : LOCATION = LC7_A29;
"|LPM_ADD_SUB:1239|addcore:adder|pcarry7" : LOCATION = LC4_A20;
"|LPM_ADD_SUB:1239|addcore:adder|pcarry9" : LOCATION = LC4_A36;
"|LPM_ADD_SUB:1239|addcore:adder|~188~1" : LOCATION = LC2_A34;
"|LPM_ADD_SUB:1239|addcore:adder|~188~2" : LOCATION = LC6_A36;
":14" : LOCATION = LC7_A36;
":16" : LOCATION = LC8_A36;
":18" : LOCATION = LC5_A36;
":20" : LOCATION = LC3_A20;
":22" : LOCATION = LC6_A20;
":24" : LOCATION = LC1_A29;
":26" : LOCATION = LC5_A29;
":28" : LOCATION = LC8_A21;
":30" : LOCATION = LC4_A33;
":32" : LOCATION = LC8_A33;
":34" : LOCATION = LC8_A31;
":36" : LOCATION = LC1_A31;
":38" : LOCATION = LC2_A8 ; -- tap0_11
":39" : LOCATION = LC2_A20; -- tap0_10
":40" : LOCATION = LC1_A20; -- tap0_9
":41" : LOCATION = LC6_A19; -- tap0_8
":42" : LOCATION = LC7_A21; -- tap0_7
":43" : LOCATION = LC1_D31; -- tap0_6
":44" : LOCATION = LC3_A32; -- tap0_5
":45" : LOCATION = LC4_A31; -- tap0_4
":46" : LOCATION = LC3_A31; -- tap0_3
":47" : LOCATION = LC1_A24; -- tap0_2
":48" : LOCATION = LC1_A30; -- tap0_1
":49" : LOCATION = LC1_A3 ; -- tap0_0
":50" : LOCATION = LC1_A8 ; -- tap1_11
":51" : LOCATION = LC8_A20; -- tap1_10
":52" : LOCATION = LC5_A20; -- tap1_9
":53" : LOCATION = LC8_A19; -- tap1_8
":54" : LOCATION = LC4_A21; -- tap1_7
":55" : LOCATION = LC6_A21; -- tap1_6
":56" : LOCATION = LC5_A32; -- tap1_5
":57" : LOCATION = LC6_A31; -- tap1_4
":58" : LOCATION = LC5_A31; -- tap1_3
":59" : LOCATION = LC3_A24; -- tap1_2
":60" : LOCATION = LC3_A30; -- tap1_1
":61" : LOCATION = LC2_A3 ; -- tap1_0
":62" : LOCATION = LC4_A34; -- tap2_11
":63" : LOCATION = LC8_A34; -- tap2_10
":64" : LOCATION = LC1_A34; -- tap2_9
":65" : LOCATION = LC2_A19; -- tap2_8
":66" : LOCATION = LC7_A27; -- tap2_7
":67" : LOCATION = LC3_A26; -- tap2_6
":68" : LOCATION = LC2_A32; -- tap2_5
":69" : LOCATION = LC3_A23; -- tap2_4
":70" : LOCATION = LC3_A35; -- tap2_3
":71" : LOCATION = LC4_A24; -- tap2_2
":72" : LOCATION = LC4_A30; -- tap2_1
END;
INTERNAL_INFO "fir3"
BEGIN
DEVICE = EPF10K30ETC144-1;
OD5P55 : LORAX = "1:FB5->LC7_A36,->LC8_A36,->LC5_A36,->LC3_A20,->LC6_A20,->LC1_A29,->LC5_A29,->LC8_A21,->LC4_A33,->LC8_A33,->LC8_A31,->LC1_A31,->LC2_A8,->LC2_A20,->LC1_A20,->LC6_A19,->LC7_A21,->LC1_D31,->LC3_A32,->LC4_A31,->LC3_A31,->LC1_A24,->LC1_A30,->LC1_A3,->LC1_A8,->LC8_A20,->LC5_A20,->LC8_A19,->LC4_A21,->LC6_A21,->LC5_A32,->LC6_A31,->LC5_A31,->LC3_A24,->LC3_A30,->LC2_A3,->LC4_A34,->LC8_A34,->LC1_A34,->LC2_A19,->LC7_A27,->LC3_A26,->LC2_A32,->LC3_A23,->LC3_A35,->LC4_A24,->LC4_A30|";
LC8_A35 : LORAX = "1:MSW7R0C35,G86R0,PA9R0C27->LC7_A28|";
LC7_A35 : LORAX = "1:MSW6R0C34,G133R0,PA0R0C21->LC1_A22,->LC2_A22|";
LC3_A22 : LORAX = "1:MSW2R0C21,G1R0,PA17R0C33->LC5_A34,->LC7_A34,->LC6_A34|";
LC4_A35 : LORAX = "1:MSW3R0C34,G14R0|2:PA3R0C27->LC5_A28|,2:PA3R0C30->LC7_A31|,2:PA3R0C32->LC1_A33||";
LC2_A22 : LORAX = "1:MSW2R0C20,G21R0,PA14R0C22->LC2_A23,->LC5_A23|";
LC5_A22 : LORAX = "1:MSW4R0C21,G110R0,PA18R0C26->LC1_A27,->LC8_A27|";
LC4_A22 : LORAX = "1:MSW3R0C21,G6R0,PA8R0C26->LC5_A27,->LC2_A27|";
LC6_A22 : LORAX = "1:MSW5R0C21,G80R0|2:PA2R0C24->LC1_A25,->LC5_A25|,2:PA2R0C26->LC4_A27||";
LC7_A34 : LORAX = "1:MSW6R0C33,G101R0,PA7R0C24->LC8_A25,->LC6_A25|";
LC6_A34 : LORAX = "1:MSW5R0C33,G117R0,PA8R0C24->LC3_A25,->LC4_A25|";
LC2_A28 : LORAX = "1:MSW1R0C27,G37R0|2:PA20R0C32->LC2_A33,->LC5_A33|,2:PA4R0C34->LC6_A35||";
LC6_A35 : LORAX = "1:MSW5R0C35,G88R0,PA15R0C22->LC2_A23,->LC5_A23|";
LC2_A23 : LORAX = "1:MSW1R0C22,G38R0,PA7R0C26->LC1_A27,->LC8_A27|";
LC4_A27 : LORAX = "1:MSW3R0C26,G53R0,PA14R0C24->LC8_A25,->LC6_A25|";
LC3_A25 : LORAX = "1:MSW2R0C24,G17R0,PA6R0C33->LC3_A34,->LC2_A34|";
LC8_A28 : LORAX = "1:MSW4R0C26,G116R0|2:PA6R0C30->LC7_A31|,2:PA6R0C32->LC1_A33||";
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -