#ifndef RDS_H
#define RDS_H

#define AF_FILL_CODE		205			//AF填充碼
#define AF_NO_TABLE			224			//無
#define AF_CNT_START		224			//AF頻率數量基數
#define AF_1ST_FREQ_START	8760		//單位是10K，實際為87.60M
#define AF_2ND_FREQ_START	8700		//單位是10K，實際為87.00M
#define AF_1ST_TABLE_MAX	204
#define AF_2ND_TABLE_START	206
#define AF_2ND_TABLE_MAX	211
//#define ADC_SMETER_MIN		500			//換臺最小信號強度 360
#ifdef LA1844
#define ADC_SMETER_MIN		680//858//340//600//40			//換臺最小信號強度 360
#define ADC_SMETER_MIN_FM	680//858//340//460//500		
#else
#define ADC_SMETER_MIN		560			//換臺最小信號強度 360
#define ADC_SMETER_MIN_FM	450		
#endif
#define PTY_COUNT			31
#define AF_SEARCH_DELAY		1000		//1000ms，自動搜臺時間間隔
#define DI					2
#define MS					3
#define TA					4
#define TP					10
#define VER					11


//#define TA_DISP				0x0010		//顯示TA標記
//#define AF_GET_MAX			0x0020		//當前波段是否TA波段(FM)
//#define PTY_SEEK			0x0080
//#define PTY_FOUND			0x0100	
//#define RDS_ACTIVE			0x0200
//#define EON_GET				0x0400
//#define AF_ACTIVE			0x0800
//#define AF_EN				0x1000
//#define AF_SEEK				0x2000
//#define AF_DISP				0x4000
//#define AF_FLASH			0x8000
#define AF_SEEK_DELAY		3				//信號不好時，4S等待
#define TA_SEEK_DELAY		90				//AF啟動后,120S開始找TA
//#define USE_AF_SEEK_DELAY
void rds_clear_af(void);	//add by robbin
void rds_clear_var(void);
char * rds_get_ct(void);
char * rds_get_ptyn(void);
char * rds_get_ps(void);
void rds_process_group(unsigned int a, unsigned int b, unsigned int c, unsigned int d);
void rds_thread(void);
void rds_af_check(void);
void rds_ta_check(void);
void rds_ta_flash(void);
void rds_af_flash(void);
void rds_clear(void);
void rds_is_ta_freq(void);
void rds_seek_ta(void);
void rds_seek_pty(void);
void rds_disp_radio_text(void);
BYTE rds_get_af_max(UINT16 *ptrAfBuff,BYTE len);
#ifndef __DECL_RDS__
#define __DECL_RDS__
__DECL_RDS__ BYTE rdsEnable;
__DECL_RDS__ UINT16 rdsParam;
__DECL_RDS__ BYTE rdsAFEnable;
__DECL_RDS__ BYTE rdsTAEnable;
__DECL_RDS__ BYTE rdsTPGet;
__DECL_RDS__ BYTE rdsTAGet;
__DECL_RDS__ BYTE rdsTASend;
__DECL_RDS__ BYTE rdsTASeek;
__DECL_RDS__ BYTE rdsAFSeek;
__DECL_RDS__ BYTE rdsPTYSeek;
__DECL_RDS__ BYTE rdsAFFlash;
__DECL_RDS__ BYTE rdsAFActive;
__DECL_RDS__ BYTE rdsActive;
__DECL_RDS__ BYTE rdsAFGetMax;
__DECL_RDS__ BYTE rdsPTYGet;
__DECL_RDS__ BYTE rdsEONGet;

__DECL_RDS__ BYTE afTableBuf[8];
__DECL_RDS__ UINT16 afSignalMeter[8];
__DECL_RDS__ BYTE nCurrentPty;
__DECL_RDS__ BYTE nRadioTextStart;
__DECL_RDS__ BYTE taSeekTimeout;
__DECL_RDS__ UINT16 rds_freq;
__DECL_RDS__ UINT16 maxRdsFreq;
__DECL_RDS__ UINT16 minRdsAfAdc;
#else
BYTE rdsEnable = OFF;
//UINT16 rdsParam = AF_EN;				//add by Robbin
//UINT16 rdsParam = 0;				//add by Robbin
//rds全局變量
BYTE rdsAFEnable = 1;				//是否啟用AF，默認啟動
BYTE rdsTAEnable = 0;				//是否允許TA信號
BYTE rdsTPGet = 0;					//是否有TP信號
BYTE rdsTAGet = 0;					//是否有TA信號
BYTE rdsTASend = 0;					//是否發送TA切換
BYTE rdsTASeek = 0;					//是否正在搜索TA中
BYTE rdsAFSeek = 0;					//是否啟動AF搜索
BYTE rdsPTYSeek = 0;				//是否啟動PTY搜索
BYTE rdsAFFlash = 0;				//AF燈是否閃爍
BYTE rdsAFActive = 0;				//是否存在AF
BYTE rdsActive = 0;					//是否存在RDS信號
BYTE rdsAFGetMax = 0;				//是否獲得AF表中最強信號
BYTE rdsPTYGet = 0;					//是否獲得PTY信號
BYTE rdsEONGet = 0;					//是否收到EON信號

BYTE afTableBuf[8];					//頻率表，單位：100K
UINT16 afSignalMeter[8];			//每個AF信號強度
BYTE nCurrentPty=0;
BYTE nRadioTextStart=0;
BYTE taSeekTimeout = TA_SEEK_DELAY;
UINT16 rds_freq=0;
UINT16 maxRdsFreq=0;
UINT16 minRdsAfAdc=ADC_SMETER_MIN;
#endif

#endif