?? stm32f10x_vector.s
字號:
;******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
;* File Name : stm32f10x_vector.s
;* Author : MCD Application Team
;* Version : V2.2.0
;* Date : 06/13/2008
;* Description : STM32F10x vector table for RVMDK toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Configure external SRAM mounted on STM3210E-EVAL board
;* to be used as data memory (optional, to be enabled by user)
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************
; If you need to use external SRAM mounted on STM3210E-EVAL board as data memory,
; change the following define value to '1' (or choose ENABLE in Configuration Wizard window)
;// <o> External SRAM Configuration <0=> DISABLE <1=> ENABLE
DATA_IN_ExtSRAM EQU 0
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
;// <h> Stack Configuration
;// <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
;// </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; If you need to use external SRAM mounted on STM3210E-EVAL board as data memory
; and internal SRAM for Stack, uncomment the following line and comment the line above
;__initial_sp EQU 0x20000000 + Stack_Size ; "Use MicroLIB" must be checked in
; the Project->Options->Target window
; Amount of memory (in bytes) allocated for Heap
; Tailor this value to your application needs
;// <h> Heap Configuration
;// <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
;// </h>
Heap_Size EQU 0x00000400
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
THUMB
PRESERVE8
; Import exceptions handlers
IMPORT NMIException
IMPORT HardFaultException
IMPORT MemManageException
IMPORT BusFaultException
IMPORT UsageFaultException
IMPORT SVCHandler
IMPORT DebugMonitor
IMPORT PendSVC
IMPORT SysTickHandler
IMPORT WWDG_IRQHandler
IMPORT PVD_IRQHandler
IMPORT TAMPER_IRQHandler
IMPORT RTC_IRQHandler
IMPORT FLASH_IRQHandler
IMPORT RCC_IRQHandler
IMPORT EXTI0_IRQHandler
IMPORT EXTI1_IRQHandler
IMPORT EXTI2_IRQHandler
IMPORT EXTI3_IRQHandler
IMPORT EXTI4_IRQHandler
IMPORT DMA1_Channel1_IRQHandler
IMPORT DMA1_Channel2_IRQHandler
IMPORT DMA1_Channel3_IRQHandler
IMPORT DMA1_Channel4_IRQHandler
IMPORT DMA1_Channel5_IRQHandler
IMPORT DMA1_Channel6_IRQHandler
IMPORT DMA1_Channel7_IRQHandler
IMPORT ADC1_2_IRQHandler
IMPORT USB_HP_CAN_TX_IRQHandler
IMPORT USB_LP_CAN_RX0_IRQHandler
IMPORT CAN_RX1_IRQHandler
IMPORT CAN_SCE_IRQHandler
IMPORT EXTI9_5_IRQHandler
IMPORT TIM1_BRK_IRQHandler
IMPORT TIM1_UP_IRQHandler
IMPORT TIM1_TRG_COM_IRQHandler
IMPORT TIM1_CC_IRQHandler
IMPORT TIM2_IRQHandler
IMPORT TIM3_IRQHandler
IMPORT TIM4_IRQHandler
IMPORT I2C1_EV_IRQHandler
IMPORT I2C1_ER_IRQHandler
IMPORT I2C2_EV_IRQHandler
IMPORT I2C2_ER_IRQHandler
IMPORT SPI1_IRQHandler
IMPORT SPI2_IRQHandler
IMPORT USART1_IRQHandler
IMPORT USART2_IRQHandler
IMPORT USART3_IRQHandler
IMPORT EXTI15_10_IRQHandler
IMPORT RTCAlarm_IRQHandler
IMPORT USBWakeUp_IRQHandler
IMPORT TIM8_BRK_IRQHandler
IMPORT TIM8_UP_IRQHandler
IMPORT TIM8_TRG_COM_IRQHandler
IMPORT TIM8_CC_IRQHandler
IMPORT ADC3_IRQHandler
IMPORT FSMC_IRQHandler
IMPORT SDIO_IRQHandler
IMPORT TIM5_IRQHandler
IMPORT SPI3_IRQHandler
IMPORT UART4_IRQHandler
IMPORT UART5_IRQHandler
IMPORT TIM6_IRQHandler
IMPORT TIM7_IRQHandler
IMPORT DMA2_Channel1_IRQHandler
IMPORT DMA2_Channel2_IRQHandler
IMPORT DMA2_Channel3_IRQHandler
IMPORT DMA2_Channel4_5_IRQHandler
;*******************************************************************************
; Fill-up the Vector Table entries with the exceptions ISR address
;*******************************************************************************
AREA RESET, DATA, READONLY
EXPORT __Vectors
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler
DCD NMIException
DCD HardFaultException
DCD MemManageException
DCD BusFaultException
DCD UsageFaultException
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVCHandler
DCD DebugMonitor
DCD 0 ; Reserved
DCD PendSVC
DCD SysTickHandler
DCD WWDG_IRQHandler
DCD PVD_IRQHandler
DCD TAMPER_IRQHandler
DCD RTC_IRQHandler
DCD FLASH_IRQHandler
DCD RCC_IRQHandler
DCD EXTI0_IRQHandler
DCD EXTI1_IRQHandler
DCD EXTI2_IRQHandler
DCD EXTI3_IRQHandler
DCD EXTI4_IRQHandler
DCD DMA1_Channel1_IRQHandler
DCD DMA1_Channel2_IRQHandler
DCD DMA1_Channel3_IRQHandler
DCD DMA1_Channel4_IRQHandler
DCD DMA1_Channel5_IRQHandler
DCD DMA1_Channel6_IRQHandler
DCD DMA1_Channel7_IRQHandler
DCD ADC1_2_IRQHandler
DCD USB_HP_CAN_TX_IRQHandler
DCD USB_LP_CAN_RX0_IRQHandler
DCD CAN_RX1_IRQHandler
DCD CAN_SCE_IRQHandler
DCD EXTI9_5_IRQHandler
DCD TIM1_BRK_IRQHandler
DCD TIM1_UP_IRQHandler
DCD TIM1_TRG_COM_IRQHandler
DCD TIM1_CC_IRQHandler
DCD TIM2_IRQHandler
DCD TIM3_IRQHandler
DCD TIM4_IRQHandler
DCD I2C1_EV_IRQHandler
DCD I2C1_ER_IRQHandler
DCD I2C2_EV_IRQHandler
DCD I2C2_ER_IRQHandler
DCD SPI1_IRQHandler
DCD SPI2_IRQHandler
DCD USART1_IRQHandler
DCD USART2_IRQHandler
DCD USART3_IRQHandler
DCD EXTI15_10_IRQHandler
DCD RTCAlarm_IRQHandler
DCD USBWakeUp_IRQHandler
DCD TIM8_BRK_IRQHandler
DCD TIM8_UP_IRQHandler
DCD TIM8_TRG_COM_IRQHandler
DCD TIM8_CC_IRQHandler
DCD ADC3_IRQHandler
DCD FSMC_IRQHandler
DCD SDIO_IRQHandler
DCD TIM5_IRQHandler
DCD SPI3_IRQHandler
DCD UART4_IRQHandler
DCD UART5_IRQHandler
DCD TIM6_IRQHandler
DCD TIM7_IRQHandler
DCD DMA2_Channel1_IRQHandler
DCD DMA2_Channel2_IRQHandler
DCD DMA2_Channel3_IRQHandler
DCD DMA2_Channel4_5_IRQHandler
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler
IF DATA_IN_ExtSRAM == 1
; FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is
; required, then adjust the Register Addresses
; Enable FSMC clock
LDR R0,= 0x00000114
LDR R1,= 0x40021014
STR R0,[R1]
; Enable GPIOD, GPIOE, GPIOF and GPIOG clocks
LDR R0,= 0x000001E0
LDR R1,= 0x40021018
STR R0,[R1]
; SRAM Data lines, NOE and NWE configuration
; SRAM Address lines configuration
; NOE and NWE configuration
; NE3 configuration
; NBL0, NBL1 configuration
LDR R0,= 0x44BB44BB
LDR R1,= 0x40011400
STR R0,[R1]
LDR R0,= 0xBBBBBBBB
LDR R1,= 0x40011404
STR R0,[R1]
LDR R0,= 0xB44444BB
LDR R1,= 0x40011800
STR R0,[R1]
LDR R0,= 0xBBBBBBBB
LDR R1,= 0x40011804
STR R0,[R1]
LDR R0,= 0x44BBBBBB
LDR R1,= 0x40011C00
STR R0,[R1]
LDR R0,= 0xBBBB4444
LDR R1,= 0x40011C04
STR R0,[R1]
LDR R0,= 0x44BBBBBB
LDR R1,= 0x40012000
STR R0,[R1]
LDR R0,= 0x44444B44
LDR R1,= 0x40012004
STR R0,[R1]
; FSMC Configuration
; Enable FSMC Bank1_SRAM Bank
LDR R0,= 0x00001011
LDR R1,= 0xA0000010
STR R0,[R1]
LDR R0,= 0x00000200
LDR R1,= 0xA0000014
STR R0,[R1]
ENDIF
IMPORT __main
LDR R0, =__main
BX R0
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE*****
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -